Browse > Article
http://dx.doi.org/10.4191/KCERS.2006.43.10.626

Ceramics Body Development Using Waste Whiteware  

Lee, Jea-Il (Department of Ceramic Engineering, Myongji University)
Lee, Yong-Seok (Material Research Institute for Sustainable Development, AIST Chubu, Japan)
Lee, Byung-Ha (Department of Ceramic Engineering, Myongji University)
Publication Information
Journal of the Korean Ceramic Society / v.43, no.10, 2006 , pp. 626-634 More about this Journal
Abstract
Ceramics manufacturers in the nation produced more than 5000 tons of ceramics wastes a year increasing industrial waste quantity: However, almost no researches were made to reduce environmental pollution and to recycle waste ware. In this study, white ware scraps that were produced at Icheon, Gyeonggi-do were recycled to make use of them as raw materials of ceramics body and to develop new ceramics body that had economic advantages and good quality. The findings showed that the addition of waste ware had limit of 20 wt% considering molding. The addition of waste ware of 20 wt% to white ware lowered baking temperature of the white ware that was added by waste ware of 20 wt% by 30$^{\circ}C$ than existing white ware, and property values were good, for instance, porosity of 3% in average and water absorptivity of 2% in average, and the bending strength recorded more than 800 kgf/$cm^2$ to be high than that of existing white ware being sold in market. The waste ware could be used to produce new ware body and to recycle resources and to solve environmental problems caused by burial and to improve property of ceramics and to save transportation costs as well as baking costs.
Keywords
Industrial waste quantity; Recycle waste war;
Citations & Related Records
연도 인용수 순위
  • Reference
1 R. C. Bradt, 'A High-Tech Approach to a Traditional Ceramic-The Toughness of Porcelain,' pp. 15-22 in proceeding of International Symposium on Fine Ceramics Arita 86, 1986
2 W. M. Carty and U. Senapati, 'Porcelain-Raw Materials, Processing, Phase Evolution and Mechanical Behavior,' J. Am. Ceram. Soc., 81 [1] 3-20 (1998)   DOI   ScienceOn
3 F. H. Norton, 'Fine Ceramics (Technology and Applications),' McGraw-Hill, 1970
4 D. Rhodes, 'Clay and Glazes for the Potter,' Chilton Book Company, 1973
5 L. Mattyasovszky-Zsolnay, 'Mechanical Strength of Porcelain,' J. Am. Ceram. Soc., 40 299-306 (1957)   DOI
6 N. Yamamoto, 'Mechanical Strength of Porcelain,' NGK Review, 25 17-22 (1962)
7 S. I. Warshaw and R. Silica, 'Comparison of Strength of Triaxial Porcelains Containing Alumina and Silica,' J. Am. Ceram. Soc., 50 [7] 337-42 (1967)   DOI
8 A. W. Norris, D. Taylor, and I. Thorpe, 'Range Curve: An Experimental Method for the Study of Vitreous Pottery Bodies,' Trans. J. Br. Ceram. Soc., 78 102-08 (1992)
9 Y. Kobayashi, O. Ohira, Y. Ohashi, and E. Kato, 'Effect of firing Temperature on Bending Strength of Porcelain for Tableware,' J. Am. Ceram. Soc., 75 [7] 1801-06 (1992)   DOI
10 J. O. Hong, S. G. Kang, K. G. Lee, Y. T. Kim, Y. J. Kim, J. H. Kim, and M. S. Park, 'Characteristics of Sintered Bodies Made from the System of Paper Sludge Ash-Fly Ash- Clay(in Korean),' J. Kor. Ceram. Soc., 38 [10] 908-13 (2001)   과학기술학회마을
11 M. Pelino, C. Cantalini, F. Veglio, and P. P. Plescia, 'Crystallization of Glasses Obtained by Recycling Goethite Industrial-Wastes to Produce Glass-Ceramic Materials,' J. Mat. Sci., 29 [8] 2087-94 (1994)   DOI
12 H. Schneider, K. Okada, and J. A. Pask, 'Mullite and Mullite Ceramics,' John Wiley & Sons, 1994
13 I. S. Kim, S. W. Kang, J. S. Park, M. W. Lee, B. H. Lee, and K. H. Lee, 'Influence of Mullite-Seed on the Mullite Synthesis from Various Compositions,' J. Kor. Ass. Crystal Growth, 10 [1] 48-54 (2000)
14 S. W. Lee, H. J. Kim, and E. H. Kim, 'Control of Permanent Shrinking of Recycled Castable Refractories from Waste Refractories of $Al_2O_3-SiO$(in Korean),' J. Kor. Ceram. Soc., 29 [1] 15-22 (1992)
15 F. H. Norton, 'Ceramic for the Artist Potter,' Wesley Publishing Co. Inc., 1956
16 W. D. Kingery, H. K. Bowen, and D. R. Uhlmann, 'Introduction to Ceramics,' John Wiley & Sons, 1976
17 A. J. Leonard, 'Structural Analysis of the Transition Phase in the Kaolinite-Mullite Thermal Sequence,' J. Am. Ceram. Soc., 60 [1-2] 37-43 (1977)   DOI   ScienceOn
18 J. H. Lee, E. S. Na, and S. C. Choi, 'A Study on the Effect of Residual Stress between Body and Glaze of Pottery on the Mechanical Strength,' Kor. J. Mat. Res., 9 [2] 181-86 (1999)
19 Y. G. Jung, 'Effect of Firing Temperature on Mechanical Property and Contact Damage in Pottery(in Korean),' J. Kor. Ceram, Soc., 35 [12] 1343-50 (1998)   과학기술학회마을
20 H. J. Lim, S. C. Choi, E. S. Lee, and J. S. Lee, 'Effect of Processing Parameters on the Densification-Behaviors by Low Shrinkage in Clay Materials(in Korean),' J. Kor. Ceram. Soc., 33 [7] 725-34 (1996)
21 E. S. Lee, 'Studies on the Mechanical Properties of Porcelain Bodies(in Korean),' J. Kor. Ceram. Soc., 11 [3] 69- 79 (1974)
22 Andreola-F, Barbieri-L, Corradi-A, Lancellotti-I, and Manfredini- T, 'The Possibility to Recycle Solid Residues of the Municipal Waste Incineration into a Ceramic Tile Body,' J. Mat. Sci., 36 [20] 4869-73 (2001)   DOI   ScienceOn
23 I. Agote, A. Odriozola, N. Gutierrez, A. Santamaria, J. Quintanilla, P. Coupelle, and J. Soares, 'Rheological Study of Waste Porcelain Feedstocks for Injection-Molding,' J. Eur. Ceram. Soc., 21 [16] 2843-53 (2001)   DOI   ScienceOn