• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.152-169
• /
• 2018

The purpose of this study was to analyze the effect of adjacentroads on the concentration of negative air ions in urban neighborhood park. The measured factors were negative air ion concentration, positive airion concentration, airtemperature,relative humidity, wind speed, green formation volume factor (GVZ) and distance from highway and general road. The mean negative air ion concentration was $206ea/cm^3$ and the positive air ion concentration was $416ea/cm^3$ in the influence zone of roads. On the other hand, the mean negative air ion was $339ea/cm^3$ and the positive air ion was $229ea/cm^3$ in the unaffected zone of roads, which are inner areas of the park. The difference of the negative air ion concentration according to the influence of the road was statistically significant. The negative air ion concentration model was presented by integrating the correlation analysis with the influence factors, and the explanatory power of the model was increased by adding the influence factor of the road.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.49-56
• /
• 2021

The purpose of this study is to develop a methodology to select a cluster of night traffic accidents using CRP (Continuous Risk Profile) analysis. the other purpose of this study is to present the characteristics of the traffic accident cluster section selected at night using CRP analysis. The CRP analysis was performed considering traffic volume of target routes through traffic accident data. In addition, variables were set according to the freeway sections. the method of subtracting the daytime CRP from the nighttime CRP was used to analyze the nighttime traffic accident. As a result, Using the CRP analysis, the sections of hotspot were identified and plotted based on traffic accidents. Also, the sections where traffic accidents are frequent were those where IC or Tunnels were installed, and there was a deviation from the general section. In conclusion, CRP analysis could be used to calculate the frequent section of specialized traffic accidents at night, and it was selected as a point in need of improvement due to the frequent occurrence of specialized traffic accidents at night in the section where IC or tunnel facilities are installed. In addition, it is inferred that the number of specialized traffic accidents at night in the section where IC or tunnel facilities are installed is a factor in the problem of night visibility due to lighting facilities.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.133-146
• /
• 2021

Providing weather information on roads today means that the road weather conditions near weather observation points are presented to road managers and road users. These weather observation points are managed by the Korea Meteorological Administration. However, it is difficult to provide accurate weather information due to physical limitations such as the presence of precipitation collection points, distance to weather information provision roads, and the presence of mountains. Therefore, this study intends to perform a comparative analysis by time zone and administrative dong provided by the Meteorological Administration using the wiper information among the information contained in the PVD(Probe Vehicle Data) collected from the highway C-ITS project. As a result of the analysis it was possible to detect rainfall even in the event of local rainfall and rainfall over a long period of time and the higher the cumulative precipitation per hour, the higher the probability of coincidence. This study is meaningful because it used PVD to solve the limitations of the existing road weather information provision method and suggested utilization plan for PVD.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.108-126
• /
• 2023

In this paper, the dynamic hard shoulder running for bus only (HSRFBO) was presented to solve the traffic congestion by increase the capacity in chronic congested sections of highways, and a simulation was performed to evaluate the comparison with the current hard shoulder running for all vehicles(HSRFAV) and median bus only lane and HSR(MBOLHSR). According to the evaluation results, it was evaluated to be more advantageous in terms of traffic flow and safety than the current HSRFAV. In addition, the speed of passing buses is slightly reduced compared to the MBOHSR, but the speed of entering and exiting buses is increased and the speed of buses and cars is greatly improved. Therefore It was analyzed that the efficiency of transport personnel was also improved. In particular, it is expected that traffic flow will be stabilized as the difference in speed between passenger cars and buses will be greatly reduced, and violations of exclusive bus lanes by passenger cars will be greatly reduced. In addition, the operation time of HSR is greatly reduced, so that the original function of the shoulder lane can be maintained as much as possible. As a result, it was analyzed that the risk of accidents was significantly reduced when operating HSRFBO compared to when operating MBOHSR, and cross-conflicts with high accident severity did not occur.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.114-123
• /
• 2023

With the development of computer vision technology, video sensors such as CCTV are detecting incident. However, most of the current incident have been detected based on existing fixed imaging equipment. Accordingly, there has been a limit to the detection of incident in shaded areas where the image range of fixed equipment is not reached. With the recent development of edge-computing technology, real-time analysis of mobile image information has become possible. The purpose of this study is to evaluate the possibility of detecting expressway emergencies by introducing computer vision technology to dash cam. To this end, annotation data was constructed based on 4,388 dash cam still frame data collected by the Korea Expressway Corporation and analyzed using the YOLO algorithm. As a result of the analysis, the prediction accuracy of all objects was over 70%, and the precision of traffic accidents was about 85%. In addition, in the case of mAP(mean Average Precision), it was 0.769, and when looking at AP(Average Precision) for each object, traffic accidents were the highest at 0.904, and debris were the lowest at 0.629.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.54-66
• /
• 2018

In this study, vehicle speeds at acceleration and deceleration lanes of rest areas for drowsy drivers were investigated to analyze effects of acceleration and deceleration lane lengths, grades and curve radius. In addition, we used VISSM to analyze proper lengths of rest area's acceleration and deceleration lanes. Several VISSIM scenarios with different lengths of acceleration and deceleration lane were constructed. Through VISSIM simulation, we collected individual vehicle speed data to analyze speed changes by different lengths of acceleration and deceleration lanes. As a result of the vehicle speed change investigation, grades and curve radii of the rest area affected the speed, most of all lengths of acceleration and deceleration lane showed a great effect on the vehicle speed. In the case of short lengths of acceleration and deceleration lane, speed variation among vehicles was significant. If the deceleration lane length is short, the vehicle enters a state in which the speed is not sufficiently reduced, and if the acceleration lane length is short, the vehicle enters a state in which the speed is not sufficiently accelerated showing high risks of conflicts and accidents. It is recommended that 245m length of deceleration lane and 370m length of acceleration lane should be installed at least to secure safety and manage conflicts relevantly.

• Journal of the Korean Geographical Society
• /
• v.31 no.3
• /
• pp.508-528
• /
• 1996

The purpose of this study is to analyze the classification of the hierarchy in terms of centrality and the demarcation of shopping areas in the context of goods-purchasing activity in the Kyeong-ju si area (The old Kyeong-ju city and Wol-song Kyn). The basic data for this study include mail questionnaire materials and sources by the on-the-sport survey. The main results of this study are as follows. (1) When forty-two centers within the wide Kyeong-ju area are classified into hierarchies in terms of the functional index and the number of central functions, it is confirmed that there are five hierarchies or classes. Hierachy A is the City of Kyeong-ju. Hierarchy B is the Up of An-gang. Hierarchy Cis made up of three Up of Kam-p'o, Oe-dong and Kon-ch' on. Hierachy D consist of seven Myons and two Ris. Hierarchy E is composed of one Myon and twenty-seven Ris. (2) Hierarchy A has five proper functions of the center. Hierarchy B holds eleven of them. Hierarchy C takes forty-one. Hierarchy D cherish twenty-seven. And hierarchy E has three. Therefor Hierachies C and D have the most functions of all. The threshold populations of the lowest central function is fifty-eight of miscellaneous stores in the central place of Hierarchy E (3) The purchase distance of the central functions of a center becomes farther in the order of barbers' and beauty salons, dental clinics, TV and refrigerator shops, and furniture stores. (4) When the shopping areas are classified according to goods purchase activity, they can be divided into four: the Myon, small Up, big Up, and City areas. Each shopping area can be classified into two categories: the independent areas and compoung areas. The Kyeong-ju city area is the largest city shopping areas of Po-hang and Ull-san are very small.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.55-67
• /
• 2002

구간검지체계를 기반으로 한 첨단교통정보제공시스템(Advanced Traveler Information Systems)은 그 기능 수행시 다음의 중요 고려사항을 지닌다. 첫째는 제공 정보의 신뢰성이며, 둘째는 정보수집비용에 관련한 수집자료수의 한계이다. 본 논문에서는 이러한 한계성 극복을 위해 보다 대표성 있는 교통정보 형태의 설정 및 통계적으로 신뢰성 있는 정보산출을 위해 요구되는 적정표본수의 결정에 대한 연구를 수행하였다. 도시고속도로(올림픽대로)와 도시간선도로(천호대로)의 실측 구간통행시간분포 분석결과 단일교차로 구간의 경우 다른 구간들의 단일봉(unimodal)의 정규분포형태와는 다른 두 개의 봉우리를 지닌 분포형태(bimodal)가 나타났다. 따라서 이러한 구간은 기존과는 다른 새로운 교통정보 형태가 필요하며, 본 논문에서는 모든 통과차량들의 평균통행시간으로 정의되는 한 개의 대표치가 아닌 신호주기에 의한 정지여부에 따라 분리되는 주행시간과 지체시간 또는 주행속도와 통행속도 개념의 세분화된 정보형태를 설정하였다. 또한 중심극한정리를 기초로 한 통계적인 표본수 결정식을 이용하여 설정된 신뢰수준 하에서의 정보산출을 위해 요구되는 적정 표본수를 산출하였다. 그 결과, 교통이 혼잡할수록 요구되는 표본수는 적어지는 것으로 나타났다. 우선 적정 표본수 만큼의 표본추출을 하고 제안된 정보산출 방법에 의해 교통정보를 산출한 후 실측치와의 오차를 비교하였다. 그 결과 산출된 교통정보는 신뢰수준 95%와 허용오차 5㎞/h를 만족하였다. 다음으로 구간검지체계를 이용하여 정보를 산출하는 타시스템 교통정보와의 오차율을 비교하였다. 그 결과, 실측치와 본 연구의 산출방법에 의한 교통정보, 로티스교통정보 및 차량번호판 인식시스템의 교통정보와의 비교 결과 제안된 교통정보형태의 타당성을 볼 수 있었다.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.37-37
• /
• 2011

최근 세계적인 지진의 발생과 함께 구조물의 내진성능 평가 및 증진 방법에 대하여 많은 연구가 진행 되고 있다. 특히 교량 구조물의 교각의 경우에는 상부구조의 고정하중 및 활하중을 지반에 전달하여 주는 역할을 하기 때문에, 역으로 지진이 발생하였을 경우 교각의 내진성능에 따라서 교량의 안전도에 많은 영향을 미칠 수 있다. 또한 산악지역이 국토의 70%이상을 차지하는 우리나라의 지형적인 특성상 고교각을 이용한 장대교량의 건설이 필요하며 도시지역의 교통량 증가로 인한 도시고속도로의 건설 등 고가교의 필요성이 점차 증가하고 있다. 그러나 CFT(Concrete Filled Tube)부재의 경우에는 콘크리트가 3축 구속 상태로 존재하지만 자중이 크며 내진 성능이 떨어지는 단점을 가지고 있다. 이러한 단점을 보완하기 위하여 CFT부재의 단면을 중공으로 만듦으로써 부재를 경량화하고 내부 튜브를 삽입하여 내부를 구속 시킨 내부 구속 중공 CFT 부재(Internally Confined Hollow CFT Member, ICH CFT)가 개발되었다. 이는 콘크리트가 내 외부 튜브에 의하여 구속되어 3축 구속 상태로 존재함으로써 콘크리트 중공부로의 취성파괴를 방지하여 연성도 및 강도를 향상시켜주며, 단면의 감소로 인해 재료비를 절감 할 뿐 아니라 자중 감소로 인해 내진 설계에도 유리하다. 현재 내부 구속 중공 CFT 부재에 대한 연구가 많이 진행되고 있지만, 튜브를 삽입함으로써 부재의 중공부로 발생하는 구속력의 특성을 해석적으로 정립한 연구는 미비한 실정이다. 본 연구에서는 압축을 받는 중공 CFT 부재에 내부 튜브를 삽입함으로써 발생하는 콘크리트의 구속력을 해석적 연구를 통하여 수행하였으며, 구속력을 파악하기 위한 평가 방법으로는 구속 콘크리트의 중공비와 직경, 외부튜브의 두께, 내부튜브의 두께 등으로 평가하였다. 해석적 연구 결과, 내부 튜브를 삽입함으로써 발생되는 외부 구속력은 이론적 수식에 의한 구속 응력값과 비슷한 값을 가지지만 내부로 발생하는 구속력은 이론적 수식에 의한 구속 응력값에 도달하지 못하는 것을 확인할 수 있었다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.6
• /
• pp.155-160
• /
• 2008

The urban areas have various landuses such as residential, commercial, industrial and official purposes that are highly concerned with human activities. The other landuses are relating to vehicle activities, which are roads, parking lots, bridges, parks etc. The mainly using landuses by human activities are possessing three different areas that are buildings, parking lots/roads and landscapes. Of these areas, the buildings and landscapes can be classified as non-pollution areas. However, the parking lots or roads are classifying as the main pollution areas because of vehicle activities. Therefore, the landuses arising the nonpoint pollution during a storm in urban areas are roads and parking lots. The vehicles are emitting lots of nonpoint pollutants such as metals and particulate matters and it is impacting on water qualities and aqua-ecosystems nearby the city areas. Therefore, this research was conducted for characterizing the pollutant types and determining the EMCs (Event Mean Concentrations) and unit pollutant loads during a storm. The monitoring was performed on 9 locations such as highways, service area, tollgates, parking lot and bridges. All of the landuses selected for monitoring are concerned with transportation. The results can be effectively used to predict the pollutant loading before urban planning and to select the BMPs (Best Management Practices) for reducing the pollution.