• The Korean Journal of Quaternary Research
• /
• v.13 no.1
• /
• pp.79-89
• /
• 1999

Three deep borings to obtain vertical continuous samples including weathered basement soils (KP-1, KP-2 and KP-3) were carried out in the reclaimed Kimpo tidal flat with purposes to establish late Quaternary stratigraphy. On the basis of detailed observations and descriptions on color, sedimentary structure and textural composition of cored sediments, four lithostratigraphic units are classified. From the stratigraphic top to bottom, they are Holocene tidal sand and muddy deposit (Unit I), early Holocene freshwater marsh muddy deposit (Unit II), late Pleistocene tidal sand and muddy deposit (Unit III) and late Pleistocene basal fluvial gravel deposit (Unit IV). In particular, Unit III is divided into two parts: the upper part-weathered and cryoturbated part during the Last Glacial Maximum (Unit III-a) and the lower part-unweathered tidal sand and muddy deposit (Unit III-b).

• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.196-199
• /
• 2000

Electroless plating is the desirable surface treatment method which is being widely used to all kinds of material such as requiring corrosion resistance, wear resistance and conductivity, especially plating of nonconductive material. Electroless nickel deposit has particular characteristics including non-magnetic property, amorphous structure, wear resistance, corrosion protection and thermal stability. In this study, electroless nickel plating was studied with an change in hardness and corrosion resistance of electroless nickel-phosphorus deposit depending on heat treatment. The highest hardness value was obtained by heat treatment at $500^{\circ}C$ Corrosion resistance of deposit, which had been heated at $300^{\circ}C$, was excellent when it was immersed in 1M $H_2SO_4$ solution for 60 hrs.

• Electrical & Electronic Materials
• /
• v.5 no.2
• /
• pp.189-197
• /
• 1992

고온 초전도체 $Y_{1}$Ba$_{2}$Cu$_{3}$O$_{7-y}$에서 Y를 Sm으로 치환시켰을 때의 자기 임계 전류밀도와 저항은 각각 30K와 80-160K의 온도에서 측정되었다. 그리고 X-선 회절분석 및 적외선 투과율 측정은 실온에서 수행되었으며 시료들은 고상 반응법에 의해서 제조되었다. 93K근에의 값을 갖는 초전도 전이온도 T$_{c}$는 치환양에 따라 거의 변하지 않았다. 시료들의 결정구조는 X-선 회절무늬로 부터 모두 직방정계임이 판명되었다. 적외선 투과율 측정에서 날카로운 peak들은 472.78-618.53$cm^{-1}$ /범위에 있었다. 이것은 특이할 정도로의 low-lying plasmalike edge와 낮은 에너지의 전자적인 여기가 존재함을 나타내는 것이다. 자기 임계 전류밀도는 $10^{3}$~$10^{4}$A/$cm^{2}$범위에 있었다. 전이온도 T$_{c}$에 상자성 불순물의 영향이 거의 없는 것으로 보아 123phase에서 Y가 고온 초전도성에 주된 역할을 하지 않음을 알수 있었다.다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.1-10
• /
• 1990

This paper represents the hull form development of a high speed container ship based on the thin ship theory, Hess & Smith method, the reference ship data and model test results. The high efficiency propeller designed by the lifting surface theory shows good performance in the cavitation and the pressure fluctuation force. Also, the optimum design technique based on the finite element method was adopted for the hull structure design and the hull vibration analysis. Finally, the performance of a newly developed container ship has been compared with the sea trial results and the excellent performance in speed, vibration, etc. was confirmed.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.100-104
• /
• 2019

The 'ITO/Ag/ITO' multilayers as a highly conductive and transparent electrode, even with the optimum thickness conditions, the transmittances were much lower than those of a single ITO layer on some ranges of the visible wavelength. In order to improve the transmittance, Ag layer was formed with mesh structure. Where, the thickness of the Ag layer was about 10 nm and the space between the Ag lines was varied from 2.9 ㎛ to 19.6 ㎛ with the fixed Ag width of about 1.2 ㎛ in order to vary an open ratio of the Ag mesh structure. The transmittance and sheet resistance in the ITO/Mesh-Ag/ITO multilayer structure were analyzed depending on the open ratio. As a result, a trade off in the open ratio was necessary in order to obtain the transmittance as high as possible and the sheet resistance as possible low. By the open ratio of about 86%, in the ITO/Mesh-Ag/ITO multilayer structure, the transmittance was nearly same as the single ITO layer and the sheet resistance was about 62.3 Ω/.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.11
• /
• pp.81-87
• /
• 2018

Among various types of geothermal heat pump systems, Vertical Closed-Loop Geothermal Heat Pump (VGSHP) has received increasing attention due to a variety of advantages such as the potential to be installed in a relatively small space and improved energy efficiency. In this research, the performance of VGSHP system coupled with heat storage tank was evaluated, by analyzing operational behavior of heat storage tank, the variations of heat pump energy performance due to the connection with heat storage tank, part load ratios characteristics of heat pump and the corresponding energy cost, compared to chiller and boiler based conventional system. The results of this study showed that the VGSHP system coupled with heat storage tank showed an energy saving effect of about 18% for cooling and about 73% for heating, and annual heating/cooling energy cost reduction of 43,000,000 KRW ($ 39,000), compared to the conventional air conditioning system. In addition, after considering both energy cost and initial investment cost including equipment, installation and auxiliary device expenses, payback period of approximately 11.8 years was required.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.10
• /
• pp.37-44
• /
• 2018

In this study, the effects of considering hourly metabolic rate variations for predicted mean vote (PMV) control on the heating and cooling energy and greenhouse gas emission were investigated. The case adopting PMV control taking the hourly metabolic rate into account was comparatively analyzed against the conventional dry-bulb air temperature control, using a detailed simulation technique. Under the assumption that all the apartments in Korea adopt the PMV control incorporating real-time metabolic rate measurements, nationwide reductions of primary energy and greenhouse gas emission were analyzed. As a result, PMV control considering hourly metabolic rate variations is expected to reduce national primary energy by 6.2% compared to conventional dry-bulb air temperature control, corresponding to reduction of 10,342 GWh. In addition, it turned out that 6.6% of tCO2 emission can be reduced by adopting PMV control, corresponding to nationwide reduction of greenhouse gas emission by approximately 1,720,000 tCO2.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.8
• /
• pp.177-184
• /
• 2019

Recently, electric power usages and peak loads from buildings are increasing due to higher outdoor air temperatures and/or abnormal climate during the summer period. As one of the eco-friendly measures, a renewable energy system has been received much attention. Particularly, interest on a photovoltaic (PV) system using solar energy has been rapidly increasing in a building sector due to its broad applicability. In using the PV system, one of important factors is the PV efficiency. The normal PV efficiency is determined based on the STC(Standard Test Condition) and the NOCT(Nominal Operating Cell Temperature) performance test. However, the actual PV efficiency is affected by the temperature change at the module surface. Especially, higher module temperatures generally reduce the PV efficiency, and it leads to less power generation from the PV system. Therefore, the analysis of the relation between the module temperature and PV efficiency is required to evaluate the PV performance during the summer period. This study investigates existing algorithms for calculating module surface temperatures and analyzes resultant errors with the algorithms by comparing the measured module temperatures.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.4
• /
• pp.32-43
• /
• 2012

Hangzhou, in China, is a city that has a history as long as 2,300 years and is renowned due to its natural scenery of a beautiful lake surrounded by gentle green hills. This world wide famous scenery, known as West Lake(西湖), in 2011, was included in the World Heritage Landscape List. Though this place experienced enormous development and changes during thousands of years, historic sceneries did not disappear with the passage of time. In contrary, they are refined and increased attributing to protection efforts from past dynasties. Therefore, research in landscape transition is significant for building livable environment and preserving historical landscape. This paper mainly focuses on history transition of city Hangzhou. First of all, its urban construction and guiding ideology is analyzed. Then, deep meticulous research is carried out on development and preservation achievements for dynasty Tang, Song, Yuan, Ming and Qing. In the end, from a historical point of view, this paper will provide a new perspective which would contribute to sustainable preservation of historical landscape. From the Song Dynasty to the Qing Dynasty, the West Lake through several times of the rectification and construction, the present landscape was completed during thousand years several times through the construction.

• 한국지구과학회:학술대회논문집
• /
• 2005.09a
• /
• pp.124-131
• /
• 2005

A GDS (Geomagnetic Depth Sounding) method, one of extremely low-frequency EM methods, has been carried out to examine deep geo-electrical structures of the Korean peninsula. In this study, five additive GDS sites acquired in south-eastern area of the Korea were integrated into twelve previous GDS results. In addition, 3-D MT modeling considering the surrounding seas of the Korean peninsula was performed to evaluate sea effect at each GDS site quantitatively. As a result, Observed real induction arrows was not explained by solely sea effect, two conductive structures that are able to explain differences between observed and calculated induction arrows, was suggested. The first conductive structure is the Imjingang Belt, which is thought as a extension of Quiling-Dabie-sulu continental collision belt. The effects of the Imjingang Belt clearly appear at YIN and ICHN sites. The second one is the HCL (Highly Conductive Layer), which is considered as a conductive anomaly by mantle upwelling generated in back-basin region. The effects of the HCL are also confirmed at KZU, KMT101, 107 sites, in the south-eastern of the Korean peninsula.