• 제목/요약/키워드: 도성

검색결과 746건 처리시간 0.028초

대규모 시스템을 위한 준최적 저감도성 비집중형 제어기에 관한 연구 (A Study on Decentralized Suboptimal Controller for Large Scale Systems with Low Sensitivity Property)

  • 오상록;서일홍;변증남
    • 대한전자공학회논문지
    • /
    • 제20권3호
    • /
    • pp.45-51
    • /
    • 1983
  • 본 논문에서는 대규모 시스템을 위한 준최적 저감도성 비집중형 제어기를 설계하기 위하여 준최적 이득 행렬을 구하기 위한 필요조건과 알고리즘을 유도하였다. 또한 감도를 고려하지 않은 종래의 비집중제어기와의 비교를 위하여 수치적 예를 들어 보였다.

  • PDF

DC Pulsed Magnetron Sputtering 법으로 제조된 B-C 박막과 B-C/DLC 다층막의 물성에 관한 연구

  • 김강삼;조용기
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.311-311
    • /
    • 2012
  • Boron carbide (B-C) 박막은 높은 경도, 열적 안전성, 화학적 안전성이 우수한 하드 코팅 소재로 사용되고 있다. 우수한 특성을 가지는 B-C 박막에 대한 연구는 B4C 비전도성 타겟을 이용하여 RF Sputtering 법으로 증착 공정변수에 대해서 박막의 물성에 관해 일부 연구자들이 진행하였으나, Pulsed dc margnetron sputtering 법으로 증착 공정변수에 대한 물성의 연구는 미진하였다. 반면에, DLC 박막은 우수한 특성을 가지는 하드 코팅 소재이나 400도 이상에서는 내열성이 떨어지는 단점을 가지고 있다. 연구에서는 B-C 박막의 내열성이 우수한 특성을 이용하여 DLC 박막의 내열성을 높이기 위한 목적으로 B-C 박막과 DLC 박막을 다층막으로 제조함으로서 DLC 박막을 구조적으로 안정화를 시키고자 하였다. 그리고 비전도성 B4C 타겟으로 Pulsed dc 마그네트론 스퍼터링법을 이용하여 증착기술을 개발하기 위해서 공정압력과 인가전력에 따른 B-C 박막을 제조하여 그 물성을 조사하였고, B-C/DLC 다층막을 제조하여 DLC 박막의 내열성을 증가시키고자 하였다. B-C 박막과 B-C/DLC 다층막의 경도와 탄성율은 나노인덴테이션과 마이크로 비커스를 이용하였으며, 박막의 성장구조와 박막의 구조를 조사하기 위해 SEM과 FTIR 및 XRD 을 이용하여 측정하였다.

  • PDF

단락 사고 검출용 고온초전도체의 초전도성 회복 시간 변화 측정 (Recovery time after quench of Au/YBCO thin film for fault accident detection)

  • 임성우;김혜림;현옥배;성태현;심정욱
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.246-247
    • /
    • 2007
  • 최근 KEPRI-LSIS가 공동 개발한 하이브리드형 초전도 한류기 동작 시, 사고 검출을 담당하는 초전도체의 최적 설계에 적용하기 위하여 Au/YBCO 박막의 ��치 회복 특성을 조사하였다. $600\;V_{rms}$, 3 ms의 사고가 초전도 박막에 인가되었을 때, ��치가 종료된 이후 초전도성을 회복하기 위해 142 ms의 시간이 소요되었다. 또한 인가 시간이 증가함에 따라 소요 시간도 비례하여 증가하여 4 ms 동안 인가되었을 때, ��치 회복 시간은 272 ms로 측정되었다.

  • PDF

열전도성 플라스틱 평판에서의 착상거동 (Frosting Behavior on the Plate of Thermally Conductive Plastic)

  • 이장석;이관수
    • 설비공학논문집
    • /
    • 제16권7호
    • /
    • pp.667-672
    • /
    • 2004
  • An experimental study has been carried out to investigate the frosting behavior on the plate of thermally conductive plastic (PBT based resin) by comparing it with those of aluminum and some plastic test specimens (PTFE based resin). It is found that the frosting behavior of plastic specimens with 1 mm thickness shows similar trend to that of aluminum except PTFE. The properties of frost formed on the specimens are found to be affected by both thermal conductivity and surface characteristics of the materials. The results indicate that the heat and mass transfer rates of PBT resin are almost equivalent to those of aluminum.

18세기에 축조된 한양도성 치성의 형식과 위치 (Form and Location of Chiseong(square-shaped lookout) Constructed in Hanyangdoseong(Seoul city wall) of the 18th Century)

  • 김영수;송인호
    • 건축역사연구
    • /
    • 제30권2호
    • /
    • pp.19-28
    • /
    • 2021
  • The purpose of this study is to research about the construction of Chiseong around the Heunginjimun Gate area in the 18th century. the conclusions derived from the historical evidence of the number, location, size, and form, and construction method of Chiseong was as follows. First, the Chiseong(Square-shaped lookout) of Hanyangdoseong was built in the 29th year of King Yeongjo(1753) and can be found in the national record. Five sites of the Chiseong are currently identified. It is assumed that the Foru was installed on top of some of the Chiseongs. Second, Chiseong was destroyed sequentially in the first half of the 20th century. Third, Chiseong is a rectangular in shape and six are constructed. Fourth, Sixth Chiseong could figure out through Hengryeopungsokdo, the drawing of Jeong Seon.

저온에서의 전기재료

  • 조철
    • 전기의세계
    • /
    • 제23권1호
    • /
    • pp.21-25
    • /
    • 1974
  • BCS이론-고체양자론의 입장에서 초전도성을 구명함 - 즉 paired electron의 기원 paired electron과 normal electron간의 energy gap의 존재 자속의 양자화 Josephson tunmeling effect등에 대해서는 지면관계로 생략했고 주로 현상론적으로 극히 개략적으로 기술하게 되었으며 특히 응용부분에서는 극히 최근의 동향만을 간단하게 소개하였다.

  • PDF