• Defense and Technology
• /
• no.5 s.279
• /
• pp.26-37
• /
• 2002

타이타늄은 융점이 높으며 공업용 합금 중 비강도가 가장 크고, 인체를 포함한 어떠한 산화성 및 환원성 분위기에서도 스테인리스강보다도 내식성이 탁월할 뿐 아니라, 극적온 특성 등 내환경성이 우수하다. 또한 질량효율이 크고, 낮은 열 팽창계수, 비자성 특성에 다양한 제작성을 겸비하였을 뿐 아니라, 정비유지를 감안한 수명 주기 비용이 우수한 타이타늄 재료는 방탄재, 전투차량, 야포, 소총 등 육상장비, 구축함, 항공모함, 잠수함 등 수상 및 수중장비, 가변익기 및 고정익기 등 군용길ㄹ 포함하는 항공 우주장비 등에 없어서는 안 되는 재료이다.

• Defense and Technology
• /
• no.2 s.288
• /
• pp.60-67
• /
• 2003

높은 비강도와 산화성 및 환원성 분위기에서의 탁월한 내식성 등으로 무기체계에 적합한 소재인 타이타늄은 1790년 영국의 목사 Gregor가 원소를 발견한지 156년이 지난 1946년에서야 비로소 첫방탄시험이 미국의 실험실에서 이루어지게 되었다. 그러나 타이타늄의 높은 화학반응성과 높은 융점($1670^{\circ}C$)때문에 상업적으로 광범위하게 사용되는 것은 더디게 진행되어 왔다. 최근 선진국에서는 타이타늄 재료의 지상무기체계 적용이 광범위하게 검토되어 진행되고 있다.

• Proceedings of the KSLP Conference
• /
• 2003.11a
• /
• pp.162-163
• /
• 2003

후두의 기능으로는 하기도의 보호, 호흡, 발성, 흉강의 고정 등이 있다. 이 중 발성은 성대의 진동에 의한 성대음이 입술까지의 성도(vocal tract) 및 비강에서의 조음과 공명 과정을 거치면서 이루어진다. 후두 질환을 진단하는 방법으로 간접 후두경, 단순 X-선 검사, 굴곡성 후두경(flexible fiberscope), 후두원시경(telescope), 전산화 단층 촬영, 자기공명영상 등이 사용되어 왔다. (중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.33-33
• /
• 1998

용접 공정은 우주 항공 산업 분야에서 금속 구조물의 확실한 기밀 보장을 위해 필수적인 매우 중요한 공정 중의 하나로서 특히 새로이 개발되는 비강도가 높은 신소재의 경우일수록 그 재료에 대한 용접성이 주요 해결 과제이다. 용접 공정에서 모재는 국부적으로 용융 온도 이상으로 가열되었다가 급히 냉각되기 때문에 열 사이클은 용접부의 크기, 형상 및 용접 공정에 따라 큰 차이를 보이며, 제품 품질에 큰 영향을 끼치고 있다는 것은 널리 알려진 사실이다.

• Defense and Technology
• /
• no.3 s.289
• /
• pp.51-57
• /
• 2003

높은 비강도와 산화성 및 환원성 분위기에서의 탁월한 내식성 등으로 무기체계에 적합한 소재인 타이타늄은 1790년 영국의 목사 Gregor가 원소를 발견한지 156년이 지난 1946년에서야 비로소 첫방탄시험이 미국의 실험실에서 이루어지게 되었다. 그러나 타이타늄의 높은 화학반응성과 높은 융점($1670^{\circ}C$)때문에 상업적으로 광범위하게 사용되는 것은 더디게 진행되어 왔다. 최근 선진국에서는 타이타늄 재료의 지상무기체계 적용이 광범위하게 검토되어 진행되고 있다.

• Journal of the Korean Institute of Gas
• /
• v.13 no.4
• /
• pp.15-21
• /
• 2009

The fiber reinforced composite material is widely used in the multi-industrial field where the weight reduction of the infrastructure is demanded because of their high specific modulus and specific strength. Pressure vessels using this composite material have two main merits which are to cut down energy by reducing weight and to have long-term life due to corrosion resistance. In this paper, we developed optimal design module of laminate for CNG composite pressure vessel winding E-glass/epoxy based on Von-Mises yield criterion, Tsai-Hill theory and stress ratio using finite element method and ANSYS RSM(Response Surface Method).

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.1
• /
• pp.104-117
• /
• 1999

The Composite materials has been used in the field of high technology industry because of high specific stiffness and high specific strength. Specially, the composite materials has been widely applied to the field of the aircraft and the transportation by the effectiveness of light weight due to low specific weight and reduction of the parts due to bonding, molding and so on. These advantages about the composite have led to study and apply in the transmission shaft for the aircraft and the drive shaft for the automobile. The composite material propeller shaft with the high vibrational stability was designed and analyzed. In order to verify the analysis, two types of experimental test which are the FFT analyzer with impact hammer and the rotational equipment were applied.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.1
• /
• pp.61-65
• /
• 2016

Composites are materials that are widely used in industries such as automobile and aircraft. The composite material is required as a material for using in a high temperature environment as well as acting as a high pressure environment like the nozzle part of the ship. It is important to know the properties of composites. Result values obtained substituting the properties of matrix and fiber numerically have an large error compared with experimental value. In this study we utilize CASADsolver EDISON program for using Finite Element Method. Properties by substituting the fiber and Matrix properties of the composite material properties were compared with those measured in the experiment and calculated by the empirical properties.

• Composites Research
• /
• v.32 no.5
• /
• pp.222-228
• /
• 2019

The proton exchange membrane fuel cell (PEMFC) system has many potential uses as an environmentally friendly power source. Carbon fiber composite bipolar plates are highly corrosion resistant and have high specific strength and stiffness in acidic environments, however, the relatively low electrical conductivity is a major issue which reduces the efficiency of PEMFC. In this study, electrically conductive particles (graphite powder and carbon black) are applied to carbon-epoxy composite prepregs to reduce the electrical resistance of the bipolar plates. The electrical resistance and mechanical properties are measured using conventional test methods, and a unit cell performance evaluation of developed carbon composite bipolar plates is performed to compare with the conventional bipolar plate.

• Journal of Acupuncture Research
• /
• v.22 no.6
• /
• pp.229-239
• /
• 2005

Objectives : Allergic rhinitis is a prevalent disease. Nasal obstruction is one of the main symptom in allergic rhinitis. It induces sleep disturbances, depression, attention deficit, memory impairments. Acupuncture treatment for rhinitis was mentioned in literature, but there is not enough report that provide evidence by well designed clinical study. The purpose of this research is to examine the effect of acupuncture treatment for nasal obstruction of allergic rhinitis. Methods : In this randomized, single blind, placebo-controlled study, we compared active acupuncture with minimal acupuncture for the treatment of nasal obstruction owing to persistent allergic rhinitis. Acupoints used in active acupuncture group were I120($Y{\hat{o}}nghyang$), GV23($Sangs{\hat{o}}ng$), IL4(Hapkok). Volunteers who satisfied the requirements were enrolled in study. Total nasal volume(NV) and total nasal minimum cross-sectional area(MCA) were measured by acoustic rhinometry before and after treatments(0min, 7.5min, 15min). Results : 101 subjects finished study. There were not difference between two groups on age, sex, weight, height, blood pressure, pulse, respiratory rate, severity of persistent allergic rhinitis, number of positive antigen. After treatment(0min) total NV were significantly increased compared with before treatment in active acupuncture group(p=0.0007) and minimal acupuncture group(p=0.0175). After treatment(15min) total NV of minimal acupuncture group was decreased compared with before treatment(p=0.2560), but total NV of active acupuncture group was maintained increasing in degree of borderline significance(p=0.0871). After treatment(0min) total NV were significantly increased compared with before treatment in active acupuncture group(0.0007) and minimal acupuncture group(p=0.0175). After treatment(Omin) total MCA were significantly increased compared with before treatment in active acupuncture group(p<0.000l) and minimal acupuncture group(p=0.0005). After treatment(15min) total MCA of minimal acupuncture group was decreased compared with before treatment(p=0.6082), but total NV of active acupuncture group was maintained increasing in degree of borderline significance(p=0.0929). Conclusion : Acupuncture treatment reduced nasal obstruction in persistent allergic rhinitis. Further study in the form of long term is needed.