• 제목/요약/키워드: 도말층

검색결과 19건 처리시간 0.026초

엔진 구동형 니켈 티타늄 파일을 이용한 근관 확대 시 도말층 제거에 대한 윤활제의 영향 (The effect of lubricants in removing smear layer on canal enlargement with engine-driven Ni-Ti file)

  • Jeong-Beom Min;Young-Lin Cho;Ho-Keel Hwang
    • Restorative Dentistry and Endodontics
    • /
    • 제26권3호
    • /
    • pp.206-214
    • /
    • 2001
  • 근관계의 완전한 충전을 위해 기계적인 근관 확대 및 화학적인 세척은 필수 불가결하다. 근관내 기구 조작 시 근관벽에는 무기물과 유기물로 구성된 도말층이 형성되는데, 이 층은 서서히 분해되어 충전재 주위에서 미세누출을 야기하고, 세균과 그 부산물이 이동할 수 있는 통로를 제공하기 때문에 제거되어야 한다. 현재 이러한 목적을 위해 다양한 기구들과 세척 용액들이 이용되고 있다. 최근에는 근관확대를 위해 엔진 구동형 니켈-티타늄 파일이 개발되어 임상에서 널리 사용되고 있으며, 이러한 엔진 구동형 파일을 사용할 때는 윤활제의 사용이 필수적이다. 현재 시판되고 있는 윤활제들에는 도말층 제거를 위한 EDTA가 함유되어 있다. 따라서, 본 연구의 목적은 엔진 구동형 니켈-티타늄 파일을 이용해 근관을 확대할 경우 이런 윤활제들의 도말층 제거 효과를 비교 평가하는 것이다. 본 실험에는 75개의 치아가 각각 15개씩 5개의 군으로 분류되어 사용되었다. 대조군은 윤활제를 사용하지 않은 경우이고, 실험 1군에서는 윤활제로 RC-PREP$^{TM}$이, 실험 2군에서는 Glyde$^{TM}$가 각각 사용되었고. 실험 3군은 RC-PREP$^{TM}$을 사용한 후 17% EDTA로 처리하였으며. 실험 4군은 Glyde$^{TM}$를 사용한 후 17% EDTA로 처리하였다. 처리된 시편을 절단한 후 주사전자현미경을 통해 시편의 근관의 중앙부와 치근단 부위를 관찰하여 얻어진 결과는 다음과 같다. 1. 대조군과 실험군의 비교시, 대조군에서 더 많은 양의 도말층이 관찰되었고, 이는 통계학적으로 유의성이 있었다 (p<0.01). 2. 윤활제의 종류에 따른 비교 시, Glyde$^{TM}$를 사용한 2군에서 RC-PREPTM을 사용한 1군 보다 더 적은 양의 도말층이 관찰되었지만, 이는 통계학적으로 유의성이 없었다. 3. 윤활제 사용과 EDTA 처리에 따른 효과 비교 시, EDTA로 처리한 3, 4군에서 윤활제만을 사용한 1, 2군 보다 더 적은 양의 도말층이 관찰되었으며, 이는 통계학적으로 유의성 이 있었다(P<0.01). 4. 치근 중앙부와 치근단 부위에서의 도말층 제거 효과 비교 시, 1, 2군에서는 치근 중앙부에서 더 적은 양의 도말층이 관찰되었고, 통계학적으로 유의성이 있었다(P<0.01). 3, 4군에서는 중앙부의 도말층이 더 적었지만 통계학적으로 유의성이 없었다. 이상으로부터 EDTA가 함유된 윤활제를 함께 사용하면서 엔진구동형 니켈-티타늄 파일로 근관확대 시, 근관벽에 형성된 도말층 제거에 대한 파일의 효능이 상승되었다. 그러나, 윤활제의 도말층 제거 효과는 17% EDTA용액으로 근관벽을 처리하는 것보다는 낮았다 따라서, 엔진구동형 니켈-티타늄 파일로 근관확대 시 EDTA가 함유된 윤활제를 함께 사용하는 것이 요구되고, 보다 완벽하게 도말층을 제거하기 위해서는 충전 전에 17% EDTA 용액으로 근관벽을 처리하는 것이 필요하다고 사료된다.

  • PDF

EDTA의 세정시간에 따른 근관 내 smear layer의 제거효과에 관한 연구 (TIME-DEPENDENT EFFECTS OF EDTA APPLICATION ON REMOVAL OF SMEAR LAYER IN THE ROOT CANAL SYSTEM)

  • 이자경;박상혁;최기운
    • Restorative Dentistry and Endodontics
    • /
    • 제31권3호
    • /
    • pp.169-178
    • /
    • 2006
  • 본 연구는 EDTA용액의 적용 시간에 따른 도말층의 제거 효과를 비교하여 EDTA용액의 최적 적용 시간을 알고자 시행되었다. 단근치 35개를 NaOCl 용액 하에서 근관 형성 후 대조군은 NaOCl 용액 5 ml로 2분간, 실험군은 30초군, 1분군, 2분군으로 세분하여 17% EDTA 용액 5 ml로 각각 30초, 1분, 2분간 세정하였다. 세정이 끝난 치근의 도말층 제거 정도와 상아 세관의 erosion 정도를 주사전자현미경을 이용하여 관찰한 결과는 다음과 같다. 1. 대조군: 도말층이 전혀 제거되지 않았다. 2. 실험군 1) 중간$\frac{1}{3}$: 세 군 모두에서 도말층이 거의 완전히 제거되었고, EDTA적용 시간이 증가할수록 erosion발생 빈도가 증가하였다. 2) 치근단$\frac{1}{3}$: 2분군이 다른 두 군에 비해 도말층 제거 정도가 우수하였다. 따라서 erosion 발생을 최소화면서 도말층을 효과적으로 제거하기 위해서는 17% EDTA 용액을 2분간 사용하는 것이 적절한 것으로 사료된다.

엔진 구동형 니켈-타이타늄 합금파일의 절삭각에 따른 근관성형 효과에 관한 전자현미경적 연구 (SCANNING ELECTRON MICROSCOPIC STUDY ON THE EFFICACY OF ROOT CANAL WALL DEBRIDEMENT OF ROTARY NI-TI INSTRUMENTS WITH DIFFERENT CUTTING ANGLE)

  • 전인수;윤태철;박성호;금기연
    • Restorative Dentistry and Endodontics
    • /
    • 제27권6호
    • /
    • pp.577-586
    • /
    • 2002
  • 본 연구는 엔진구동형 Ni-Ti 합금 파일의 삭제날 각의 차이가 근관 성형 후 근관 내 절삭 면에 형성되는 도말층의 분포, 형태 및 상아세관 내로의 침투 정도 등에 어떤 차이를 보이는가를 알아보기 위함이다. 건전한 36개의 단근관을 갖는 발치된 사람의 단근치를 선택하고 positive cutting angle을 갖는 HEROShaper 파일과 negative cutting angle로 된 ProFile 파일을 이용하여 근관성형 후 절단면에서의 도말층의 양, 분포 형태 및 상아세관내로의 침투 빈도를 주사전자 현미경을 이용하여 사진촬영 후 다음과 같은 결과를 얻었다. 1. 사용된 엔진구동형 합금 파일의 삭제날 각의 차이에 관계없이 모든 군에서 도말층이 형성되었다. 2. 근관 성형 후 절삭면상에 나타난 도말층 형태는 삭제날 각의 차이에 따라 형태학적인 차이를 보였으며, positive cutting angle과 radial land가 없는 니켈-티타늄 전동통파일에서 상대적으로 적은 양의 도말층 형성을 보였다(p < 0.05). 결론적으로, 본 연구는 삭제날의 각이나 radial land의 유무에 관계없이 사용된 모든 엔진구동형 파일에서 도말층이 형성된 것으로 미루어 근관 성형 시 liquid EDTA와 같은 chealting agent의 사용의 필요성을 시사한다.

두 가지 다른 행정의 니켈 티타늄 파일의 성형 성상: 표면 성상, 상아질 삭편과 도말층에 대한 예비적 비교 연구 (Shaping characteristics of two different motions nickel titanium file: a preliminary comparative study of surface profile and dentin chip)

  • 박소라;박세희;조경모;김진우
    • 구강회복응용과학지
    • /
    • 제30권2호
    • /
    • pp.121-130
    • /
    • 2014
  • 목적: Reciprocating 파일인 WaveOne과 continuous rotary 파일인 ProTaper와 ProFile로 근관 형성시 상아질 벽의 표면성상과 상아질 삭편 크기와 도말층 제거 효과를 비교하였다. 연구 재료 및 방법: 60개 단근치를 ProFile, ProTaper, WaveOne으로 성형 후 근관이 보이도록 grinding 하였다. 근관 성형 동안 상아질 삭편을 모아 건조하였다. Scanning electron microscope으로 상아질 삭편 크기와 근관 표면의 불규칙성과 도말층을 관찰하였다. 결과: 표면 함요부의 범위는 ProFile, ProTaper 그리고 WaveOne에서 $150{\mu}m$, $70{\mu}m$, 그리고 $80{\mu}m$의 범위 내에서 관찰되었다. 상아질 삭편의 크기는 ProFile, ProTaper 그리고 WaveOne에서 $7{\mu}m$, $6.5{\mu}m$, 그리고$4{\mu}m$의 범위 내에서 관찰되었다. 도말층은 WaveOne의 중간 1/3과 근단 1/3에서 유의하게 더 많이 관찰되었다. 결론: WaveOne은 중간 1/3과 치근단 1/3의 도말층 제거 효과를 제외하고, ProFile과 ProTaper와 근관 표면 성상과 상아질 삭편에서 큰 차이가 없는 것으로 사료된다.

혐기성 미생물의 근관내 상아질 부착에 대한 주사전자현미경적 연구 (SEM Study on the Anaerobic Bacterial Adhesion to the Dentin of Root Canal)

  • Sung-Eun Yang;Kwang-Shik Bae
    • Restorative Dentistry and Endodontics
    • /
    • 제26권4호
    • /
    • pp.350-359
    • /
    • 2001
  • 목적 - 근관형성시 근관내 상아질벽에는 항상 도말층(smear layer)이 형성되는데, 이는 상아질, 치수조직 잔사, 조상아세포 돌기, 때로는 미생물 등으로 구성되며, 주사전자현미경상으로는 비규칙적이며, 무정형의 구상(granular)구조물로 관찰된다. 본 연구에서는 도말층의 유무에 따른 혐기성 미생물, Prevotella nigrescens의 근관내 상아질 부착정도를 주사전자현미경으로 평가하고자 한다. 지금까지 사용되었던 실험방법에 비하여 보다 임상적 환경에 가까운 실험방법을 고안, 신빙성 있는 연구결과를 기대할 수 있도록 하였다. 방법 - 치주질환이나 외상 등의 원인으로 발거된 상, 하악 전치 18개를 사용하였다. 각 치아의 치관부를 백악법랑경계부위에서 절단하고, 1군(5개치아)은 10ml의 생리식 염수를, 2군(5개치아)과 3군(5개치아)은 10ml의 3.5% NaOCl을 근관관주용액으로 사용하여 근관형성을 하였다. 근관형성 완료후 1군과 2군은 10ml의 생리식염수로, 3군은 10ml의 0.5M EDTA용액으로 final flush를 시행하여, 3군의 도말층을 제거하였다. 치근수직절단과 ethylene oxide(EO) gas 소독후 1, 2, 3군의 시편(각군10개시편)을 Prevotella nigrescens가 부유된 Brain Heart Infusion with Yeast estract, Hemin and Menadione(BHIYHM) broth내에 37$^{\circ}C$에서 3시간 동안 incubation했다. 4, 5, 6군은 실험과정을 검증하기 위한 대조군으로써, 4군(1개치아)과 5군(1개치아)은 1군, 2군과 같이 각각 생리식염수와 NaOCl만을 이용한 근관형성으로 도말층을 잔존시키고, 6군(1개치아)은 3군과 같이 NaOCl과 EDTA를 적용하여 도말층을 제거한 후, 치근 수직절단과 EO gas 소독을 시행했다. 모든 시편(1, 2, 3, 4, 5, 6군)을 통상의 방법에 따라 처리한 후 주사전자현미경을 통하여 관찰, 근관내면에 부착되어 있는 Prevotella nigrescens의 개수, 모양, 상아세관 및 도말층과의 관계 등을 관찰, 비교, 분석하였다. 결과는 t-test와 one-way ANOVA를 통하여 통계처리 하였다. 결론 - 1. 근관형성 후 근관내 상아질 표면 전체는 도말층으로 덮여 있는 양상을 보였다. 2. 3.5% NaOCl과 0.5M EDTA를 적용하여 근관내 도말층을 효과적으로 제거할 수 있었으며, 상아세관 개구부가 확연히 노출되어 있는 소견을 관찰할 수 있었다. 3. 도말층이 덮인군에서 미생물의 부착이 유의성 있게 높았다(P<0.05). 4. 근관 형성중 형성되어 근관 상아질을 덮고 있는 도말층이 미생물의 부착을 증가시켜, 근관 재감염의 기회를 증가시킴을 알 수 있었다.

  • PDF

ND-YAG 레이저가 조사된 상아질 표면에 칫솔에 의한 기계적 마모가 미치는 영향에 대한 실험적 연구 (The experimental study for the effect of tooth-brushing on the laser irradiated dentin surface)

  • 박동성
    • Restorative Dentistry and Endodontics
    • /
    • 제27권6호
    • /
    • pp.555-560
    • /
    • 2002
  • 치근부 민감성 (hypersensitivity)은 부분적으로 치근면에서의 개방된 상아세관이 존재하는 것에 기인한다고 생각되며 이러한 치근부의 개방된 상아세관은 치경부 병소 (cervical lesion)에 주로 존재하는데 이는 칫솔질에 의한 마모(toothbrush abrasion), 화학적 침식 (chemical erosion), 또는 abfraction 등의 결과로 나타난다고 한다. 이미 Nd-YAG 레이저를 이용한 실험에서 레이저를 조사한 상아질 표면의 상아 세관 구경이 감소되고 상아세관의 폐쇄가 많이 증가되는 양상을 관찰한 바 있다. 이 실험의 목적은 고출력레이저인 Nd-YAC 레이저를 이용한 상아질 표면처치의 임상사용가능성을 좀 더 상세히 평가하기 위해 상아질에 레이저를 처리한 후 기계적으로 마모시킨 경우 상아질 표면의 변화를 관찰하는 것이다. 50개의 발치된 치아의 상아질을 노출시켜 표면을 연마한 후 대조군에서는 37% 인산으로 산부식하여 상아 세관을 노출시킨 후 레이저를 조사하였고, 실험군에서는 대조군과 같은 조건으로 산과 레이저로 처리된 상아질 표면을 15, 45, 90 그리고 180분 동안 전동 칫솔로 기계적으로 마모시켜 그 표면을 주사전자현미경으로 관찰한 결과, 대조군, 칫솔질을 15, 45분간 시행한 실험군에서는 상아 세관 입구가 10% 이내에서 노출되었고 50 그리고 180분간 칫솔질을 시행한 실험군에서는 45 그리고 48%의 상아세관 입구의 노출이 관찰되었다. 그러므로 Nd-YAC레이저의 조사는 상아질 표면에서 축적 시간이 45분 이상에서 90분 이하인 기계적 마모에 의한 상아 세관 입구의 노출을 억제할 수 있을 것이라 사료된다.

ULTRASOUND가 근관벽의 도말층제거에 미치는 영향에 관한 주사전자현미경적 연구 (SCANNING ELECTRON MICROSCOPIC STUDY OF THE EFFECT OF ULTRASOUND IN THE REMOVAL OF THE SMEAR LAYER FROM THE ROOT CANAL WALL)

  • 윤승섭;홍찬의
    • Restorative Dentistry and Endodontics
    • /
    • 제16권1호
    • /
    • pp.167-180
    • /
    • 1991
  • The purpose of theis study was to evaluate the effectiveness of ultrasonic instrumentation in removing debris and smear layer from the root canal walls. 54 extracted, permanent single rooted teeth were randomly divided into 6 groups of 9 teeth. After canal preparation, the teeth were longitudinally sectioned. The sepcimens were then naturally dried for 2 days, given a maximun thickness gold coating, and examined under the SEM (JSM-35C type, JAPAN). Photographs of all specimens were then taken of the middle and the apical third of the root canal wall. The results were as follows: 1. In all groups, debris and the smear layer were not completely removed from the canal wall 2. There were no significant differences between at the apical third and at the middle third in removing debris and the smear layer in all groups. 3. There were no significant difference between the step - back group and the ultrasound group in removing debris and smear layer. 4. In general, the step - back/ultrasonund groups showed greater canal debridement than the step - back group or ultrasound group. 5. The step - back/ultrasound group with a No. 25 file for 3 min. showed significantly greater canal debridement than the step-back group (p<0.05), or the other step - back/ultrasound groups(p<0.05).

  • PDF

K-FILE과 초음파 기구의 도말층제거효과에 대한 주사전자 현미경적 연구 (A SCANNING ELECTRON MICROSCOPIC STUDY ON THE REMOVING EFFICIENCY OF SMEAR LAYER BY K-FILE AND ULTRASONIC INSTRUMENT)

  • 이수종;임미경
    • Restorative Dentistry and Endodontics
    • /
    • 제19권1호
    • /
    • pp.97-105
    • /
    • 1994
  • The purpose of this study was to evaluate the smear layer removing efficiency of two root canal preparation techniques. Twelve single-rooted teeth were used in two groups of six each. Group 1 was biomechanically prepared by hand using a K-file with a high volume of normal saline irrigation. Group 2 was. prepared by using ultrasonically activated K-file with a constant high volume of normal saline irrigation. After the experimental procedures, each root was split saggitally. The removing efficiency of the preparation methods were assessed in terms of surface condition of the canal walls at three levels, those coronal, middle, and apical thirds. On the basis of remaining debris, presence of smear layer, and patency of dentinal tubules, each canal was evaluated according to a scale form 0 to 2. A statistical analysis was used to indicated any significant differences in surface condition between the two methods. There was no statistical significance between hand instrumentation and ultrasonic instrumentation at the cervical third but removing efficiency of ultrasonic instrumentation was superior. No statistically significant differences were obhserved for middle or apical third.

  • PDF

상아질처리제(象牙質處理劑)에 의(依)한 상아질(象牙質) 표면(表面) 도말층(塗抹層)의 제거(除去)에 관(關)한 연구(硏究) (A STUDY ON THE REMOVAL OF DENTINAL SMEAR LAYER BY DENTIN CONDITIONER)

  • 안현미;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제14권2호
    • /
    • pp.65-76
    • /
    • 1989
  • The purpose of this study was to observe the effect on the removal of dentinal smear layer and morphological changes of reduced dentin surfaces by various dentin surface conditioners. Thirty-two healthy human premolars extracted due to periodontal or orthodontic reasons were used. The teeth were cross-sectioned to expose dentin at the middle portion of the crown with diamond rotary saw. The specimens were then divided into 8 groups. The sectioned dentin surfaces in group 1 to 4 were grinded with No. 400 grit silicone abrasive paper and those in group 5 to 8 were cut with #700 carbide bur under air-water spray. The grinded or cut dentin surfaces were conditioned with 3% $H_2O$, Dentin Conditioner(GC Inter. Corp., Japan), and Scotchprep(3M Dent Prod., U.S.A) according to manufacturer's directions. All the specimens were dried in room temperature for 48 hours, and gold-coated with Eiko ion coater(Eik-engineering Co.), and observed in Hitachi S-450 Scanning electron microscope at 15-25 KV. The following results were obtained; 1. The dentin surfaces grinded with the silicon abrasive paper were rougher in texture and heavier in amount of smear layer than those cut with the carbide bur. 2. Scrubbing of 3% $H_2O_2$ was not effective in removing dentinal smear layer. 3. 20-second conditioning of Dentin Conditioner (GC Inter. Corp) resulted in the removal of a significant amount of the smear layer without removing the tubular plugs and dissolving the peritubular dentin. 4. Scotchprep removed the smear layer very effectively. But at the same time it dissolved the peritubular dentin. 5. Irrespective of the uses of the silicon carbide abrasive paper or the carbide bur the morphological changes of dentin surfaces treated with the same conditioning agents were similar.

  • PDF

Gutta percha 충전시 도말층 유무에 따른 근관벽과의 접합도에 관한 주사전자현미경적 연구 (A SCANNING ELECTRON MICROSCOPIC STUDY ON THE ADAPTATION OF ROOT CANAL FILLING MATERIAL TO ROOT CANAL WALL WITH AND WITHOUT SMEAR LAYER)

  • 문주훈;조영곤
    • Restorative Dentistry and Endodontics
    • /
    • 제17권2호
    • /
    • pp.365-382
    • /
    • 1992
  • The purpose of this study was to evaluate the adaptation of filling material to the dentinal walls of root canals with and without smear layer. Fifty extracted upper and lower anterior teeth were selected, and the root canals were instrumented with K - files 1mm short of the apical foramen by step - back method. The teeth were randomly divided into two groups of 25 each : in the group I, smear layers were not removed, and in the group II, smear layers were removed by 15% EDTA solution. Again the two groups 25 teeth were randomly divided into unfilled contol group and filling groups(lateral, ultrasonic, ULTRAFIL, McSpadden compaction group). Upon completion of root canal filling, the teeth were grooved on the both the labial and lingual surfaces and then split with mallet and chisel. Each specimens were examined with JSM - 840 Scanning Electron Microscope (JEOL., Japan). The results were as follows : 1. In the contol group, dentinal tubules of group I couldn't be distinguished in the canal wall, but those of group II appeared to be open and patent. 2. In the filling groups of group I, the tubular penetration of the sealer or gutta percha couldn't be seen, but in the filling groups of group II, it could be seen except McSpadden compaction group. 3. In the filling groups, ULTRAFIL group showed the best adaptation of filling material to root canal wall among the group I, and lateral and ultrasonic condensation group showed the best adaptation of filling material among the group II. McSpadden compaction group showed the worst adaptation in group I, II. 4. Generally, the group II showed better adapation of filling material to root canal wall than the group I.

  • PDF