• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.212-219
• /
• 2015

This study focuses evaluating the efficiency and performance evaluation of composite type sheet-membrane waterproofing method that utilizes a separation behavior inducement system designed to resolve the chronic problems of disintegration and damage of overlap areas of waterproofing layers. As the result of the test, the tensile strength value was at 13.8N/mm and elongation rate at 587% for the separation behavior inducement type specimen, and the compared specimens had 14.2N/mm for tensile strength and 335% for elongation rate. For the separation behavior adhesion method specimen, when tensile stress or displacement occurred, the Zero-Span tension occurrence did not follow, which resulted in that the bottom sheet layer and the top membrane layer did not simultaneously becoming damaged. When undergoing the top and bottom layers were separated through separation behavior due to lack of flexibility, the bottom layer began to damage at the primary stage, and with the allowed boundary the upper membrane layer began to display flexibility and showed continuous displaced resulting in secondary phase damaging.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.177-184
• /
• 2019

Non-fluorinated water repellent coating solutions were obtained using methyltrimethoxysilane (MTMS) and trimethylethoxysilane (TMES) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and cured thermally to prepare water repellent coating films. During this process, the effect of molar ratio of TMES/MTMS was studied for the hydrophobic properties of the coating films. Hydrophobic properties of coating films were characterized using contact angle measurement, surface morphology analysis and infrared spectroscopy. When the molar ratio of TMES/MTMS was varied from 0 to 30, the contact angle of the un-coated cold-rolled steel sheet was $30^{\circ}$, whereas when the molar ratio of TMES/MTMS was 1, the contact angle increased to $104^{\circ}$ and water repellency was significantly improved. In the case of TMES/MTMS molar ratios of 10, 15, 25 and 30, the contact angles of coating films showed $109^{\circ}$, $114^{\circ}$, $117^{\circ}$ and $144^{\circ}$, respectively. At this time, the hydrophobicity of the coating films was improved by the increase of the surface roughness and the content of the methyl component at the coating surface. In particular, when the molar ratio of TMES/MTMS was 30, the overall surface roughness was greatly increased due to the presence of surface particles as well as the water repellency due to methyl groups of TMES, resulting in super hydrophobicity of $144^{\circ}$.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.88-89
• /
• 2013

• 한국도로학회:학술대회논문집
• /
• 2001.10a
• /
• pp.109-114
• /
• 2001

• Proceedings of the Korean Vacuum Society Conference
• /
• 1995.02a
• /
• pp.64-64
• /
• 1995

• Information Display
• /
• v.7 no.1
• /
• pp.30-38
• /
• 2006

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.08a
• /
• pp.255-255
• /
• 2004

• Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.15-18
• /
• 2008

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.414-414
• /
• 2012

차세대 플렉시블 디스플레이 소재로서, 탄소나노뷰브(CNT) 기반의 투명전도막은 기존의 ITO 박막보다 우수한 유연성을 갖기 때문에 많은 관심을 모으고 있다. 특히 낮은 저항과 투과도를 유지하면서 투명 전도막의 내구성을 향상시키는 연구는 상업화에 가장 필요한 연구 분야이다. 본 연구에서는 다층벽 탄소나노튜브(MWCNT)를 이용하여 제작된 투명 전도막의 내구성을 개선하기 위하여 오버 코팅을 통한 물성 개선을 연구하였다. 투명전도막은 PET기판 위에 스프레이 방식을 이용하여 균일하게 코팅하였다. 오버 코팅 물질로는 실리콘계 유무기하이브리드 투명하드 코팅을 적용하였다. 연구결과 오버 코팅층과 CNT 코팅층과의 젖음성이 물성 향상에 가장 많은 영향을 끼치는 것을 관찰하였고, 특히 젖음성이 증가할수록 투과도와 전기전도도가 향상되는 것을 확인하였다. 또한 고온 고습 환경에서 240시간 이상 내구성 테스트 결과, 저항률 변화가 1.1 이하인 것을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.46.2-46.2
• /
• 2010

For use of superstrate thin-film solar cells, surface texture of the transparent conductive oxide (TCO) has been used to enhance short-circuit currents by increasing light trapping into the cell. ZnO:Al films were deposited by using DC magnetron sputtering on glass substrates with ceramic (ZnO:$Al_2O_3$) target. The as-deposited TCO before texturing exhibited high transparencies (T > 85% for visible light including all reflection losses) and excellent electrical properties ($r=3-6{\times}10^{-4}{\Omega}.cm$). The optical and electrical properties of the TCO are influenced by the texturing conditions such as not only etchant dilutions but also etching time. We obtained the haze value of 14-16 resulting in increase in light trapping and short-circuit currents also.