• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.830-836
• /
• 2017

Hydrophilic coating solutions were prepared by reacting a silane coupling agent, GPTMS (3-glycidoxypropyl trimethoxysilane) with colloidal silica. Hydrophilic coating films were also obtained by depositing the hydrophilic coating solutions on polycarbonate substrates by spin-coating and subsequently by thermal curing at $120^{\circ}C$. During this process, the effect of average particle sizes of colloidal silica was studied on the properties of coating films. As a result, coating film, prepared from colloidal silica with average particle size of 25 nm, showed a low contact angle of $20^{\circ}$ and a good pencil hardness of H. On the other hand, coating films, prepared from colloidal silica with average particle sizes of 15 nm and 45 nm, exhibited high contact angles of $27^{\circ}$ and $36^{\circ}$ and pencil hardness of H and B, respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.501-504
• /
• 2008

A concrete carbonation model has been constructed that takes account of the diffusion of carbon dioxide through a coating and reaction with calcium hydroxide, and this model has been validated by an accelerated carbonation experiment. (1) By using values for the coatings calculated on the basis of a diffusion.permeation theory as input data for the analysis of diffusion.reaction carbonation in an unsteady state, the effect of the coatings in reducing carbonation can be represented with high accuracy. (2) Through a sensitivity analysis of the diffusion.reaction carbonation model and the experimental results, we found that the diffusion coefficient of calcium hydroxide shows a high interrelationship at 1e-12($m^2/s$). The reaction rate constant for carbonation shows a high interrelationship at 5e-5($m^3/mol/s$).

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.427-434
• /
• 2012

Waterborne polyurethane dispersions (PUD) were synthesized from poly (carbonate diol), isophrone diisocyanate and dimethylol propionic acid at different NCO/OH molar ratios. Subsequently, the PUD was mixed with different types of alkali metal salts ($LiClO_4$, $NaClO_4$, and $KClO_4$) to prepare antistatic waterborne polyurethane coating solutions. Effects of the types and amounts of alkali metal salts were investigated on the surface resistances of the resulting coating films. The surface resistances of coating films were decreased with increasing the amounts of alkali metal salts added in the PUD. The coating films prepared with the same amount of alkali metal salts showed increased ionic conductivity with the order of $LiClO_4$ > $NaClO_4$ > $KClO_4$. Also, the surface resistances of coating films were increased with increasing the molar ratios of NCO/OH in the PUD.

• Journal of Adhesion and Interface
• /
• v.12 no.4
• /
• pp.105-110
• /
• 2011

Polyester/melamine cured coatings had been used for pre-primed coatings and pre-coated metal coatings, because it has good mechanical,chemical properties, and mar resistance. But it has weak points such as stiffness and low formability for making automotive components. Polyester had been synthesized using polycarbonate diol of long alkyl chain which can improve flexibility and formability which is one of the important factors for pre-coated steel sheets (PCM). In this study, strain and tensile strength were examined by the tensile test and formability was examined by the drawing test. Also, Those polyester resins were also measured by DMA to verify flexibility of cured coatings.

• Journal of Adhesion and Interface
• /
• v.3 no.4
• /
• pp.10-18
• /
• 2002

Modern plastics are of great importance in many practical applications and their performance can be enhanced by surface modification to improve their hardness, wear and chemical resistance. The object of this study is invention of functional hardening coating materials which are applied to plastic, such as polycarbonate, polymethylmethacylate and acrylonitrilebutadienestyrene. In order to invention of hardening coating materials, we synthesized new silicone acrylate oligomer and prepared coating films containing silicone acrylate oligomer (SAOE) on PC substrate. The curing of coatings is performed by UV-radiation. As results of experiments, The properties of coating films which are contained SAOE is greatly improved in comparison with coating films non-contained SAOE. Especially, when 1 wt% SAOE was introduced into the coating formulation, the UV hardening coatings obtained showed the best surface hardness and gloss.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.175-180
• /
• 2016

The fluorine-containing modified polyurea was synthesized using the PTPE-diol to improve the ozone-resistance. Three types (PFDIA-10C, PFDIA-20C, PFDIA-30C) of the modified polyurea containing the fluorine content from 10 wt% to 30 wt% were prepared. After ozone treatment on the prepared films, the weight loss of film was investigated and analyzed the film properties such as hardness, wear resistance, tensile stress, elongation, etc. Also, the film surfaces were observed by the optical microscopy after ozone-resistance tests at 10 ppm for 336 h. It was shown that the defects such as the cracking, the bleaching and the mass loss were reduced and the ozone-resistance of films were improved when the contents of PFPE-diol are more than 20 wt%. It was found that the intensity of O-H peak in PFDIA compounds confirmed by FT-IR was decreased as fluorine contents were increasing.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.162-168
• /
• 2018

UV-curable hard coating solutions were prepared by mixing organic or inorganic polysilazane with urethane acrylate. UV-cured hard coating films were also obtained by flow coating, subsequently UV-curing on polymethylmethacrylate (PMMA) sheets. The effect of types and amounts of polysilazane was investigated on properties of obtained coating films. As a result, the coatings obtained by using organic polysilazane showed a high hydrophobic property with water contact angle of $95^{\circ}$, pencil hardness of 7H and high transparency of 92% in the visible wavelength range. On the other hand, the PMMA sheets made by using inorganic polysilazane exhibited a pencil hardness of as high as 8H, good adhesion to the substrate and water contact angle of $82^{\circ}$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.183.2-183.2
• /
• 2013

저항이 낮고 투과도가 일정한 투명전도막(TCF)의 내구성을 향상 및 유지 시키는 연구는 상업화에 가장 필요한 연구 분야이다. 그 중 탄소나노튜브(CNT)와 실버나노와이어(AgNW)를 섞어 만든 CNT-AgNW는 우수한 광투과성과 내화학성 및 균일한 전기 전도성을 갖고 있고 그 기반의 투명전도막은 기존의 ITO 및 CNT 박막보다 우수한 유연성을 갖기 때문에 차세대 플렉시블 디스플레이 소재로서 많은 관심을 모으고 있다. 본 연구는 PET를 이용한 CNT-AgNW로 제작된 투명전도막 위에 물성 및 두께 따른 하드오버 코팅을 통한 내구성 개선 및 유지를 연구하였다. 하드오버 코팅 물질로는 실로콘계 하이브리드 투명 하드코팅 소재를 기본으로 하고 용매 및 용질의 합성 온도를 제어하고 코팅막의 두께(Thin, Thick)를 조절을 통해 내구성 개선을 증진시키려 하였다. 연구결과 물성 향상에 가장 많은 영향을 끼치는 것은 CNT-AgNW 코팅층과 하드오버 코팅층과의 젖음성으로, 그 젖음성이 증가할수록 투과도 및 전기전도도가 향상되는 것을 관찰하였다. 분석 결과, 용매의 비점 및 비중, 용질의 합성 온도가 하드오버코팅 젖음성에 가장 많은 영향을 주는 것을 확인하였다. 또한 항온 항습($85^{\circ}C/85%$) 환경에서 240시간 이상 내구성 테스트 결과 하드오버코팅 물질 중 고온합성 및 고비점 용매를 이용하고 thick 조건이 Thin조건보다 투명전도성 평가 지수(${\sigma}DC/{\sigma}OP$)가 향상 되었다. 또한 Thin에서 면저항(${\Omega}/{\square}$) 변화율이 10% 이상을 보인 반면, Thick에서는 10% 이내의 변화율 유지를 확인하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.51-59
• /
• 2021

In this study, the purpose of this study was to quantitatively grasp the specific correlation between the raw material and the occurrence of leakage by analyzing the characteristics of leakage by adjusting the type and content of the raw material constituting the asphalt mastic coating waterproofing material. To this end, two raw materials, CA (calcium carbonate) and ASE (anti-sedimentation), which are organic and mineral extender for asphalt mastic waterproofing membrane coating, were selected. viscosity and oil leakage stability (20 ℃, 40 ℃) was evaluated. As a result of the evaluation, the oil leakage stability and viscosity were inversely proportional to the CA average particle size, and it was quantitatively proven that a correlation in proportion to the ASE content was established. The results of this study are expected to be used as core data for basic mixing design in the future mixing studies to improve leakage of asphalt mastic waterproofing membrane coating.

• Conservation Science in Museum
• /
• v.13
• /
• pp.33-36
• /
• 2012

Analysis of Flat board-shaped Lacquer ware excavated from Daho-ri was conducted. The result of species identification is identifed as Pinus spp. As a result of microscopic observation, lacquer fragment is consist of 5 layers and its thickness is about 100 ㎛. Infrared spectroscopy of the lacquer ware revealed that they had a very similar absorption band as refined lacquer, confirming that they were painted with lacquer. Result of Analysis for Circular metal ornament is alloy smelted by tin and lead. It is called Pewter. While The species of wooden objects investigated until now is broad-leaved tree; the species of flat board-shaped lacquer ware is conifer.