• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.181-183
• /
• 2012

Recently, as part of an effort to realize the low-carbon green growth, the research to measure the degree of greening about the road facility with United States as its center was performed. In addition, the Green-road certification is enforced and applied. In this study, we would like to examine the applicability of the green-road certification to domestic road to promote the settlement of green-road certification system to contribute the related industry development for the green technology development and application and spread in the roads sector.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.154-155
• /
• 2015

This study was to review the basic characteristics in order to evaluate field application of the emergency road repair materials for development of CAC(Calcium Aluminate Composite) usage. The experiment was conducted with two phases of field and laboratory conditions and the laboratory experiment consisted indoor and outdoor tests for compressive and flexural strength. In the result of an experiment, for the compressive strength test, the specimens that cured in the laboratory conditions were not satisfied the requirement of standards, while the specimens that cured in the field conditions were well satisfied with those. For flexural strength test, the result value was satisfied with the requirement on the standards only in outdoor curing condition of laboratory experiment. Based on these results, it is expected that the CAC can be used as an emergency road repair material for field conditions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.124-125
• /
• 2019

The use of road cutters in the maintenance of obsolete underground facilities maintains polluting dust, cutting sludge, etc, polluting the air environment, soil, and water, causing civil complaints caused by noise, and consequently interrupting work. Therefore, it is time for eco-friendly pavement cutting technology for fugitive dust and cutting sludge emission management and noise management. This study was based on research by the development of eco-friendly pavement cutting technology in urban areas. In this study, the current state of existing road cutters is investigated and the patented technology analysis of road cutters is conducted to derive the design elements of eco-friendly pavement cutting technology.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.141-151
• /
• 2007

The current standards and specifications for the road pavement construction have been developed based on materials and construction methods. The pavements constructed in accordance with those specifications do not guarantee high performance of pavements since they do not consider long-term performance of pavements. Therefore, as part of the study to develop performance-based construction standards for pavements, the payment adjustment methods based on the pavement performance are currently being developed. This paper presents preliminary studies performed to develop the payment adjustment methods when there is deficiency in the concrete slab thickness that is one oi the most important factors for the pavement design and construction. First, the payment adjustment methods in USA were investigated. Then, the AASHTO failure equation, the relationship between slab thickness and stress, and the relationship between stress level and pavement life were employed to propose the payment adjustment concepts based on the pavement performance for the deficient slab thickness. The variation in the slab thickness according to measurement locations was investigated by taking cores. In addition, the measurement methods of slab thickness and the variation of measured thicknesses depending on performers were analyzed, and finally the methodology to develop the thickness deficiency ranges for the use in the payment adjustment methods was proposed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.2
• /
• pp.14-23
• /
• 2015

This study was intended to evaluate the feasibility of the vehicle detector using a coil sensor. For the evaluation, the research team built a test environment for the detector consisting of a oscillation circuit, data collecting circuit, data monitoring and saving circuit, etc. As the result of the frequency analysis of the detector from the test environment, it was verified for the detector using a coil sensor to generate stable frequencies. In addition, the ease of construction and management was tested by comparing the size of cutting areas, consumption of installation materials, and installation time for a traditional loop detector and the detector using a coil sensor. As a result, the installation of the detector using a coil sensor requires less size of cutting areas, consumption of installation materials, and installation time.

• The Safety technology
• /
• no.170
• /
• pp.12-14
• /
• 2012

경기도 광주시에 위치한 성남-장호원 도로건설공사 현장. 이곳은 성남에서 장호원을 연결하는 국도 3호선 공사 6개 공구 중 2번째 공구로, 현대건설이 시공을 맡고 있다. 연장 6.3km 6차선 도로를 신설하는 대규모 공사로, 공사비만도 무려 3,924억원에 달한다. 게다가 도로의 상당부분이 교량과 터널로 구성되어 있어 공정도 상당히 까다로운 곳이다. 즉 전반적으로 관리가 매우 어려운 현장이라고 할 수 있다. 헌데도 이곳은 2002년 3월 착공에 들어간 이래 현재까지 무재해를 이어가고 있다. 실로 이곳 현장의 안전관리가 얼마나 철두철미한지를 느끼게 하는 대목이다. 안전으로 도로건설공사의 새로운 교범을 만들어가고 있는 이곳 현장을 찾아가봤다.

• International Journal of Highway Engineering
• /
• v.4 no.1 s.11
• /
• pp.171-181
• /
• 2002

Guss asphalt used in pavement of a steel deck bridge may cause severe stress and displacement on the bridge as it is treated using very high temperatures ranging from 220oC to 260cC. Therefore, it is critical to estimate the thermal effect of Guss asphalt on the steel deck bridge before the width and pattern of the unit portion are decided in order to minimize impact. In this study, we have conducted a series of numerical analysis of the upper road of Youngjong Grand Bridge, verified the feasibility of numerical value analysis by comparing the results with the data measured, and studied the thermal effects of Guss asphalt on the steel deck bridge according to temperature changes.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.673-674
• /
• 2023

도로교통의 안전 확보와 사고 예방을 목적으로 운전자나 보행자에게 필요한 정보를 제공하기 위해 경찰청에서 규격 또는 지침으로 제정하여 노변에 설치되는 교통안전시설 장치는 교통신호정보를 받기 위한 통신선과 함께 장치 구동을 위한 전원선을 개별로 시공해야 하기에 시공 비용의 절감과 함께 다종·다형의 장치에 대하여 통합적인 관제, 확장성, 유연성에 대응할 필요성이 제기되고 있다. 이에 본 논문에서는 이더넷 통신을 기반으로 전원 공급이 하나의 케이블로 가능한 이더넷 전원장치(PoE) 기술과 IoT 프로토콜인 MQTT를 이용하여 다종·다형의 교통안전시설 장치를 통합관제하고, 확장성과 유연성을 가지는 교통안전시설 장치 통합 시스템을 제안한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.5
• /
• pp.325-337
• /
• 2021

On the road and rail tunnels, the evacuation pathway and facilities such as smoke-control and fire suppression system are essential in tunnel fire. In the long twin tunnels, the cross-connection tunnel is usually designed to evacuate from the tunnel where the fire broke out to the other tunnel. In twin shield tunnels, the segment lining has to be demolished to construct the cross-connection tunnel. Considering the modern shield TBM is mostly the closed chamber type, the exposure of underground soil induced by removal of steel segment lining is the most danger construction step in the shield tunnel construction. This case study introduces the excavation method using the thrust of large steel pipe and reviews the measured data after the construction. The large steel pipe thrust method for the cross-connection tunnel can stabilize the excavated face with the two mechanisms. Firstly, the soil in front of excavated face is cylindrically pre-supported by the large steel pipe. Secondly, the excavated face is supported by the plugging effect caused by the soil pressed into the steel pipe. It was reviewed that the large steel pipe thrust method in the cross-connection tunnel is enough to secure the construct ability and stability in soil from the measurement results about the deformation and stress of steel pipe.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.5
• /
• pp.505-522
• /
• 2013

Previously, a new concept of indexing methodology has been proposed for quantitative assessment of tunnel collapse hazard level at each tunnel face with respect to the given geological data, design condition and the corresponding construction activity (Shin et al, 2009a). In this paper, 'linear' model, in which weights of influence factors are invariable, and 'non-linear' model, in which weights of influence factors are variable, are taken into account with some examples. Then, the 'non-linear' model is validated by using 100 tunnel collapse cases. It appears that 'non-linear' model allows us to have adapted weight values of influence factors to characteristics of given tunnel site. In order to make a better understanding and help for an effective use of the system, a series of operating processes of the system are built up. Then, by following the processes, the system is applied to a real-life tunnel project in very weak and varying ground conditions. Through this approach, it would be quite apparent that the tunnel collapse hazard indices are determined by well interlinked consideration of face mapping data as well as design/construction data. The calculated indices seem to be in good agreement with available electric resistivity distribution and design/construction status. In addition, This approach could enhance effective usage of face mapping data and lead timely and well corresponding field reactions to situation of weak tunnel faces.