• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.141-141
• /
• 2012

비점오염물질은 강우 시 유출되기 때문에 일간, 계절 간 유출량 변화가 대단히 크게 나타나며, 기후, 지형, 토지이용, 토양 등과 지역적인 특성과 유역 형상에 따라 변화되므로 비점오염원 유출량에 대한 정량화를 위해서는 강우지속시간동안 정확한 수질과 유량에 대한 측정 자료가 요구된다. 따라서 본 연구에서는 비점오염물질에 대해 현장 모니터링 및 현장 실측 관련 기존 연구자료 수집을 통해 중분류 토지피복분류별 원단위를 산정하였다. 또한 특정 유역에 중분류 토지피복 분류별 산정된 원단위를 적용하여 유역기반의 비점오염부하량을 산정 하였다. 대상 유역에 해당하는 하천 말단에서의 실측 자료를 활용하여 유역모형을 구축하고, 강우를 입력 자료로 하여 비점오염 물질별 부하량을 모의 산정하였다. 유역모형으로 HSPF(Hydrologic Simulation Program - Fortran)을 실제 대상유역에 적용하였고, 이에 따른 모의 결과를 실측치와 비교하여 부하량을 산정하였다. 이렇게 모의 산정된 부하량은 실측자료를 기반으로 산정된 원단위의 적용에 따른 부하량과 비교 검토하여 유역에 대한 비점오염원 부하량 산정 시 모형의 적용 가능성을 평가하였다. 본 연구에 적용된 대상유역은 동천유역으로 병성천의 주요 지류로서 유역의 상단에 위치하고 있다. 중분류 토지피복 중 공업지역, 교통지역, 과수원재배지, 비닐하우스재배지, 기타재배지에 대해서는 2008년부터 2010년까지 모니터링을 실시하였고, 이외의 중분류 토지피복에 대한 결과는 수계별 현재까지 진행되고 있는 환경기초조사사업 중 '주요 비점오염원 유출 장기 모니터링'사업의 자료를 활용하였다. 동천유역의 비점오염원 발생부하량을 산정한 결과, BOD 부하량은 대지의 경우 391.4 kg/day로서 중분류 군으로 구분한 결과에 비해 높게 산정되었다. T-N, T-P 발생부하량도 토지피복군이 대분류에서 중분류로 변화됨에 따라 부하량의 차이가 발생 하였다. 또한 동천유역에 대해 구축된 HSPF 모형의 적합도를 시기별 4개의 Case로 구분하여 평가해 보았는데 그 결과, 모형 모의치의 실측치에 대한 적합도가 높게 평가 되었다. 현재 특정 지역에 편중되어 조사되고 있는 중분류 토지피복을 조사 기관간의 교차 조사를 통해 지역적 제한성을 낮추고, 중분류에 속하는 세부피복지점을 확대하여 모니터링 지점의 다양성을 확보하여야 할 것으로 판단된다. 이와 동시에 한시적인 조사가 아닌, 장기간에 걸쳐 연구가 진행 될 경우 원단위에 대한 현재의 불확실성 및 제한성을 줄일 수 있을 것으로 판단되므로, 이러한 기초 자료 확보에 대한 장기적인 투자와 노력이 수반될 시 우리나라에 대표적으로 적용할 수 있는 비점오염원 원단위가 산정될 것으로 생각되며, 이러한 기틀이 마련되어야 비점오염원에 대한 적절한 유역관리방안을 수립할 수 있을 것으로 생각된다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.222-234
• /
• 2020

Autonomous vehicles are equipped with a wide rage of sensors such as GPS, RADAR, LIDAR, camera, IMU, etc. and are driven by recognizing and judging various transportation systems at intersections in the city. The accident ratio of the intersection of the autonomous vehicles is 88% of all accidents due to the limitation of prediction and judgment of an area outside the sensing distance. Not only research on non-signalized intersection collision avoidance strategies through V2V and V2I is underway, but also research on safe intersection driving in failure situations is underway, but verification and fragments through simple intersection scenarios Only typical V2V failures are presented. In this paper, we analyzed the architecture of the V2V module, analyzed the causal factors for each V2V module, and defined the failure mode. We presented intersection scenarios for various road conditions and traffic volumes. we used the ISO-26262 Part3 Process and performed HARA (Hazard Analysis and Risk Assessment) to analyze the risk of autonomous vehicle based on the simulation. We presented ASIL, which is the result of risk analysis, proposed a monitoring concept for each component of the V2V module, and presented monitoring coverage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2357-2364
• /
• 2017

Recently, smart wearable devices for monitoring health status have been utilized as interest in health care has increased. In this paper, we developed a fatigue measurement system that works with smart wearable devices. Unlike physical fatigue that is restored when you take enough rest, mental fatigue can decrease the efficiency or concentration of work, so you can monitor your mental health status through measurements. This system provides the function to transmit the measured data from the smart wearable device to the smartphone and to calculate the mental fatigue. A fatigue index was developed to measure fatigue and expressed as a number from 1 to 5. In addition, the results of the fatigue calculation and the survey were compared with the results of the independent sample t-test. Therefore, this system will be used to help users manage their health efficiently.

• Composites Research
• /
• v.30 no.3
• /
• pp.202-208
• /
• 2017

Resin transfer molding (RTM) is a mass production process that allows the fabrication of composites ranging in size from small to large. Recently, fast curing resins with a curing time of less than about 10 minutes have been used in the automotive and aerospace industries. The viscosity of resin is bound up with the degree of cure, and it can be changed rapidly in the fast-cure resin system during the mold filling process. Therefore, it is advantageous to experimentally measure and evaluate the degree of cure because it requires much effort to predict the flow characteristics and cure of the fast curing resin. DMA and dielectric technique are the typical methods to measure the degree of cure of composite materials. In this paper, the resin flow and degree of cure were measured through the multi-channel dielectric system. A total of 8 channels of dielectric sensors were used and resin flow and degree of cure were measured and compared with each other under various pressure conditions.

• The KIPS Transactions:PartD
• /
• v.17D no.3
• /
• pp.185-192
• /
• 2010

In sensor network environments, each sensor measures the physical environments according to the sampling period, and transmits a sensor reading to the base station. Thus, the sample period influences against importance resources such as a network bandwidth, and a battery power. In this paper, we propose new adaptive sampling technique that adjusts the sampling period of a sensor with respect to the features of sensor readings. The proposed technique predicts a future readings based on KF (Kalman Filter). By using the differences of actual readings and estimated reading, we identify the importance of sensor readings, and then, we adjust the sampling period according to the importance. In our experiments, we demonstrate the effectiveness of our technique.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.42-42
• /
• 2022

지금까지도 유역에서의 녹조 모니터링은 현장채수를 통한 점 단위 모니터링에 크게 의존하고 있어 기후, 유속, 수온조건 등에 따라 수체에 광범위하게 발생하는 녹조를 효율적으로 모니터링하고 대응하기에는 어려운 점들이 있어왔다. 또한, 그동안 제한된 관측 데이터로 인해 현장 측정된 실측 데이터 보다는 녹조와 관련이 높은 NDVI, FGAI, SEI 등의 파생적인 지수를 산정하여 원격탐사자료와 매핑하는 방식의 분석연구 등이 선행되었다. 본 연구는 녹조의 모니터링시 정확도와 효율성을 향상을 목표로 하여, 우선은 녹조 측정장비를 활용, 7000개 이상의 녹조 관측 데이터를 확보하였으며, 이를 바탕으로 동기간의 고해상도 위성 자료와 실측자료를 매핑하기 위해 다양한Machine Learning기법을 적용함으로써 그 효과성을 검토하고자 하였다. 연구대상지는 낙동강 내성천 상류에 위치한 영주댐 유역으로서 데이터 수집단계에서는 면단위 현장(in-situ) 관측을 위해 2020년 2~9월까지 4회에 걸쳐 7291개의 녹조를 측정하고, 동일 시간 및 공간의 Sentinel-2자료 중 Band 1~12까지 총 13개(Band 8은 8과 8A로 2개)의 분광특성자료를 추출하였다. 다음으로 Machine Learning 분석기법의 적용을 위해 algae_monitoring Python library를 구축하였다. 개발된 library는 1) Training Set과 Test Set의 구분을 위한 Data 준비단계, 2) Random Forest, Gradient Boosting Regression, XGBoosting 알고리즘 중 선택하여 적용할 수 있는 모델적용단계, 3) 모델적용결과를 확인하는 Performance test단계(R², MSE, MAE, RMSE, NSE, KGE 등), 4) 모델결과의 Visualization단계, 5) 선정된 모델을 활용 위성자료를 녹조값으로 변환하는 적용단계로 구분하여 영주댐뿐만 아니라 다양한 유역에 범용적으로 적용할 수 있도록 구성하였다. 본 연구의 사례에서는 Sentinel-2위성의 12개 밴드, 기상자료(대기온도, 구름비율) 총 14개자료를 활용하여 Machine Learning기법 중 Random Forest를 적용하였을 경우에, 전반적으로 가장 높은 적합도를 나타내었으며, 적용결과 Test Set을 기준으로 NSE(Nash Sutcliffe Efficiency)가 0.96(Training Set의 경우에는 0.99) 수준의 성능을 나타내어, 광역적인 위성자료와 충분히 확보된 현장실측 자료간의 데이터 학습을 통해서 조류 모니터링 분석의 효율성이 획기적으로 증대될 수 있음을 확인하였다.

• Journal of Environmental Impact Assessment
• /
• v.30 no.3
• /
• pp.164-174
• /
• 2021

Information on biodiversity plays an important role in conservation planning for ecosystem. As existing biodiversity indices are calculated and predicted only based on the number of individuals and species, it is difficult to explain aspects of genetic and ecological diversity. Phylogenetic diversity can indirectly evaluate ecological diversity as well as genetic diversity overlooked by existing biodiversity assessments. In this study, typical metrics of biodiversity (e.g., species diversity, species richness, etc.) and phylogenetic diversity were evaluated together using a long-term monitoring data of winter birds in Jungrang, Cheonggye and Anyang stream where are designated as Seoul migratory bird reserves. Then discussed the meaning of each assessmentresult. In Jungrang and Anyang stream, the number of individuals generally decreased overtime, whereas in Cheonggye stream, there was no significant change. In addition, species abundance increased over time slightly in Cheonggye stream, while there was no significant change in Jungrang and Anyang stream. Species diversity temporally increased in Jungrang and Cheonggye stream, excluding Anyang stream, but phylogenetic diversity showed a tendency to increase only in Cheonggye stream. These changes in the biodiversity assessment indices are thought to be due to anthropogenic disturbances such as construction that occurred within each site, and it was shown that species diversity and phylogenetic diversity do not always lead to the same assessment results. Therefore, this study suggests that biodiversity assessment needs to be considered from various contexts such as genetic and ecological perspectives.

• The Korean Journal of Applied Statistics
• /
• v.35 no.2
• /
• pp.203-215
• /
• 2022

In this paper, we consider the control charts applicable to monitoring the change of the population mean for sequentially observed individual data. The most representative control charts are Shewhart's individual control chart, the exponential weighted moving average (EWMA) control chart, and their combined control chart. We compare their performance based on a simulation study, and also, through real data analysis, we present how to apply control charts in practical application and investigate the problems of each control chart.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.9-16
• /
• 2010

In the health monitoring of civil engineering structures, the optimal sensor placement has a major influence on the quality of the results. This paper considers the problem of locating sensors with the aim of maximizing the data information so that structural parameters or damage of structures can be assessed. An proposed technique using a genetic algorithm is introduced to find the optimal placement of sensors. The sensitivity on modal vectors by structural parameters and the orthogonality of modal vectors have been taken as the fitness function of the genetic algorithm. A simple tower structure is used for example analyses to investigate the feasibility and applicability of the proposed approach. The example analyses show the way how the modal sensitivity and the modal orthogonality in the fitness function have influence on the optimal sensor placement. It is shown that the present method using the proposed fitness function can provide the reliable results.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.6
• /
• pp.617-623
• /
• 2015

In this study, determination methods of monitoring location in water distribution system were suggested and applied to real test bed. Small block of Gwangtan water distribution system is consisted of 582 pipes, 564 junctions, 1 reservoir, and 1 pump station. Small block of Ho Chi Minh water distribution system is consisted of 162 pipes, 148 junctions, and 1 reservoir. Two small block water distribution systems were analyzed by pressure contribution analysis method to determine the optimum monitoring locations. The pressure change was estimated at each junctions by the additional demand at a junction. From the results, the optimum monitoring location can be determined by rank of pressure contribution index at each junctions due to demand change at a junction.