• Journal of Korean Society of Steel Construction
• /
• v.16 no.6 s.73
• /
• pp.725-736
• /
• 2004

A new type of girder, called steel-confined prestressed concrete girder (SCP girder), has been developed, which maximizes the structural advantages of concrete, steel, and PS tendon, and improves on the shortcomings of steel plate girder, PSC I-girder, and preflex girder bridge for use in the construction of middle- or long-span bridges. To verify the propriety of design, structural safety, and applicability of this girder, a static load test was carried out (Kim et al.., 2002). Since the main damage typically sustained by steel bridges results from the fatigue caused by the repetition of traffic loads, fatigue safety must therefore be guaranteed in applying the SCP girder in the construction of real bridges. In this study, a fatigue test was carried out to investigate fatigue behavior and provide basic data for fatigue design. Based on the fatigue test, the fatigue safety of the girder was estimated. For the fatigue test, 10-m specimens were designed for a standard-design truckload (DB-24). A static load test was also performed before the fatigue test to analyze the structural behavior of the specimens. After the fatigue test, outer steel plates were removed to observe the condition of the concrete in the girder.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.12-20
• /
• 2015

Construction industry has played a pivotal role in the national economy, but the crisis situation of a construction industry has been worse due to the lack of recognition of the contribution of a construction industry. In particular, the transport sector is responsible for a critical function in the movement of humans and material resources, and has a profound impact on national competitiveness and the peoples' welfare, which requires quantitative analysis. In this study, economic contribution and impact of the transportation sector are measured based on the input-output model. Road and railway facilities account for 1.03% and 0.165% of the total industry respectively, and consist of a final demand and total output. Although value-added inducing effect is small, production inducing effect and backward linkage effect has been high. The results in this study will be used as the basic information for validity of investment and policy decisions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.223-233
• /
• 2014

This study empirically analyzes the relationships among the road and traffic experts' personal characteristics, the driving behavior and factors being expected to have an effect on the satisfaction about roundabout operation. The factors are drawn and grouped through the principle component analysis to clarify driving environment satisfaction on roundabout operation. Each group is named as personal attribute, driving behavior attribute, and satisfaction. After the variables are refined by confirmatory factor analysis, satisfaction model is developed with personal attribute and driving behavior attributes as exogenous variables and roundabout driving awareness and emotion attributes as endogenous variables. As a result, driving satisfaction of roundabout operation is directly influenced by delay reduction, safety improvement, capacity increase, sight improvement, severity accident reduction, and bicycle convenience and indirectly gender, age, driving time, and driving experience. Law obeyance, driving concession, traffic sign obeyance, and interposition do not statistically shows significant on satisfaction. As a result of Analytical Hierarchy Process (AHP), the turning radius of geometry and the driving behavior are important elements for roundabout safety.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.43-57
• /
• 2002

This paper introduces an analysis method to predicting the flow characteristic of flow field around otter board In order to develope a high performance model. In this experiment, it is used a numerical analysis of flow field through CFD(Computational Fluid Dynamic), PIV method in which quantitative, qualitative evaluation is possible. In this experiment, it is used PIV method with flow filed image around otter board in order to analysis of flow characteristic. The result compared flow pattern with analysis result through CFD and also measurement result of lift and drag force coefficient carried out in CWC(Circulating Water Channel). The numerical analysis result is matched well with experiment result of PIV in the research and it is able to verify In the physical aspect. The result is as follows ; (1) It was carried out visibility experiment using laser light sheet, and picture analysis through PIV method in order to analysis fluid field of otter-board. As a result, the tendency of qualitative fluid movement only through the fluid particle's flow could be known. (2) Since PIV analysis result is quantitative, this can be seen in velocity vector distributions, instantaneous streamline contour, and average vorticity distributions through various post processing method. As a result, the change of flow field could be confirmed. (3) At angle of attack 24$^{\circ}$ where It Is shown maximum spreading force coefficient, the analysis result of CFD and PIV had very similar flow pattern. In both case, at the otter-board post edge a little boundary layer separation was seen, but, generally they had a good flow (4) As the result of post processing with velocity vector distributions, instantaneous streamline contour and average vorticity distributions by PIV, boundary layer separation phenomenon started to happen from angle of attack 24$^{\circ}$, and from over angle of attack 28$^{\circ}$, it happen at leading edge side with the width enlarged.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.211-218
• /
• 2010

Volume of concrete slab changes by temperature and moisture effects. At that time, tensile stress develops because the slab volume change is restrained by friction resistance between the slab and subbase, and then crack occurs occasionally. Accordingly, researchers have made efforts to figure out the friction characteristics between the slab and subbase by performing push-off tests. Lately, researches to analyze concrete pavement behavior by the friction characteristics have been performed by finite element method. In this study, The friction characteristics between the slab and subbase were investigated based on the friction test results for lean concrete, aggregate, and asphalt subase widely used in Korean concrete pavements. The energy method bilinearizing relation between nonlinear friction resistance and displacement were suggested. The friction test was modeled by 3-D finite element program, ABAQUS, and the model was verified by comparing the analyzed results to the test results. The bilinear model developed by the energy method was validated by comparing analysis results obtained by using the nonlinear and bilinear friction resistance displacement relation as input data. A typical Korean concrete pavement was modeled by ABAQUS and EverFE and analyzed results were compared to evaluate applicability of the bilinear model.

• International Journal of Highway Engineering
• /
• v.9 no.1 s.31
• /
• pp.1-15
• /
• 2007

The objective of this paper is the establishment of finite element analysis frame work for pavement research. Finite element analysis results simulating various loading experiments are verified with sensor measurements obtained from the KHC Test Road. The accuracy of the finite element analysis can be supported by these efforts so that it helps spread out the finite element analysis to pavement research and design processes. The finite element model used in this research is the full 3D nonlinear model including concrete slab, lean concrete base, subbase, shoulder, dowel, and tie-bar. In order to accomplish the accurate verification, the loading condition and the pavement temperature distribution are exactly simulated with field measured data. The curling behavior and the strain distribution are compared with measured responses from the loading tests with a truck and the FWD. Strain and curling predictions from the concrete slab are matched well with measured responses but the strain prediction from the lean concrete base is not matched with measured response. In addition, the magnitude of permanent curling is evaluated with the finite element analysis.

• Journal of Korea Port Economic Association
• /
• v.29 no.4
• /
• pp.1-25
• /
• 2013

The purpose of this paper is to estimate economic benefits for the investment of railway transshipment system with non-powered turntable. The freight transport by railway can have decided advantages over trucks in terms of energy efficiency, emissions and cost for certain freight movements, just as transportation in the metropolitan region can have great advantages over driving truck. But the freight transport by truck should gain significant mobility benefits from a freight railway system. Thus, the railway transshipment system with non-powered turntable which is coupled railway transport advantages with load transport advantages has been developed and used in the european countries. This research has conducted the empirical analysis, by calculating the investment of railway transshipment system with non-powered turntable. The key factor for the economic benefits for the non-powered turntable is the utilizing throughputs. This demand is influenced by the throughput in the railway transshipment system. The main results of this paper are as follows: railway transshipment system with non-powered turntable does not have economic benefit for investment. We recommend that the plan for investment has to be considered the modification.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.44-57
• /
• 2020

A dedicated short-range communications (DSRC) traffic information system is a detection system for a section of road using communication between roadside equipment and on-board High-Pass units to collect road traffic information and provide reliable traffic information to drivers. The Ministry of Land, Infrastructure, and Transport announced that a DSRC system must be supported to pass the performance evaluation of an intelligent transportation system (ITS), and the performance evaluation for DSRC systems installed in expressways and national highways is started. Currently, DSRC traffic information systems are only managed for maintenance and functional-monitoring purposes, which means that detailed criteria for the operation of a DSRC traffic information system, such as communication range, the direction of the antenna, and the power of the radio wave, etc., need to be established. In this paper, the criteria of the performance evaluation of a DSRC traffic information system are presented for different road types and road environments. The proposed performance evaluation criteria included the communication range and communication power of roadside equipment. In addition, installation criteria, such as the direction of the antenna, and the height and angle of the installed system, are presented for different road types and road environments. The criteria presented were evaluated for DSRC roadside equipment and documented to improve system maintenance and quality control of the communication system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.65-72
• /
• 2011

When an expressway intersects another expressway, a unique connector needs to be designed between the two consecutive exit ramps. In such a case, it is important to design a connector such that there is enough distance for drivers to find their way safely. A current design manual in Korea prescribes the minimum length of the connector as 240 m. In this research, we have suggested a method for calculating the minimum length of a connector in order to check the feasibility of the currently prescribed length. For this purpose, we have attempted to determine the total perception-reaction time and lane-changing time required by a driver. For determining the driver's perception-reaction time, we have used the driver's decision time in addition to the conventional 2.5 s of perception-reaction time for stopping sight distances. We have considered both the design speed and the average travel speed for the calculation of the length. To evaluate the accuracy of the new method, we have chosen four sites on expressways for which relatively high accident rates were recorded. As a result, we could verify that the current limit (240 m) was sufficient for drivers to be able to change lanes in the given specific geometry. However, the prescribed limit should be revised in case the drivers' decision time is considered to be their perception-reaction time. All new approaches for calculating the ideal length of a connector have been carried out by taking into account the design speed as well as the average travel speed. Owing to the characteristics of the specific geometry for two consecutive exit ramps and the large difference between the design speed and the average travel speed in the objective areas, it is more realistic to use the proposed method by keeping the decision time equal to a driver's perception-reaction time, in order to determine the ideal distance that should be maintained between two consecutive exit ramps.

• The Journal of the Korea Contents Association
• /
• v.19 no.11
• /
• pp.111-121
• /
• 2019

Recently, through the services that use drones at fire sites to deliver on-site and road conditions into the situation room and life-saving activities or the deliveries of first aid outfits at the accident scenes that are inaccessible to humans, there are more and more cases of dealing with emergency situations. Therefore, by studying the service design using drones in the initial stage of response to fires in dense residential areas, this study was intended to reify the service design area of the response stage, including the dispatch of fire sites and the fire suppression. To do this, through literature researches, research directions were explored by examining the concept and process review of service design, and by analyzing the application cases using service design. In order examine the validity of this study, a one-on-one interview was conducted to identify the use and problems of drones among incumbent firefighters, and identified the applicability of drones to fire sites by targeting drone experts. Field research was conducted to identify the location and distance of road conditions, site conditions, and 119 safety centers, by making Yongsan-gu, the most vulnerable area to fire in Seoul, as a research sample. And, among the methodologies of service design, Persona and Customer Journey Map were prepared and Insight was derived, by using virtual scenarios for the experience values and behavior analyses of the interested parties. Through these processes, this researcher intended to present the fire-response service design and help establish the direction of service design in the initial stages of fire in Korea.