• Korean Journal of Heritage: History & Science
• /
• v.42 no.1
• /
• pp.20-39
• /
• 2009

Abstract This research is a comparative study on the geological natural monuments of South and North Koreas. The classification system on natural monuments between South Korea and North Korea is similar, but North Korea's designations are relatively well-balanced. The geology field of South Korea was composed of rocks, caves, fossils and general geology, whereas that of North Korea was subdivided into rocks, fossils, strata, mineral springs, hot springs, geography, waterfalls, lakes, caves and pools. Unlike South Korea, North Korea designates and preserves geological structures such as fold and fault, and representative outcrops of mine. It is suggested that South Korea has to establish natural monument management policies for preserving geological structures and outstanding outcrops of mine. The 47-year period of preserving natural monuments in South Korea was divided into the stages I (1962~1980), II (1981~1995) and III (1996~2008). The designated numbers of geological natural monuments in the stage I, II and III average 1.1, 0.1 and 2.6, respectively. The number of geological natural monuments in South Korea is highest in Jeju province, whereas that in North Korea is highest in Gangwon province. This implies that natural monuments have been well protected especially in the locality of slow urbanization.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.263-272
• /
• 2019

This study demonstrates the applicability of the FLO-2D for the influence analysis of the debris flow on expressway. To do this, the behavior of debris flow on the expressway was reproduced by applying the FLO-2D to actual generated debris flow. The study area is a part of the Deokyusan Service Area on the Daejon-Jinju Expressway, where traffic was blocked for 24 hours due to the debris flow in August 2005. Geographical analysis with GIS, hydrological analysis with HEC-HMS, and estimation of the amount of debris flow were carried out using field survey and soil property test data. Then, the optimum parameter combination of FLO-2D was selected through the parameter sensitivity analysis, and the behavior analysis of debris flow on expressway was applied. The comparison of the predictions with the observations shows the availability of FLO-2D for the behavior analysis of debris flow on the expressway.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.3
• /
• pp.43-50
• /
• 2021

On the construction of new roads, the cut slope is inevitable and thus has been widely applied in the mountainous area. Particularly, the retaining wall with the precast concrete panel is often selected for its higher stability and mostly constructed in bottom-up method. However, the bottom-up method results in steeper slope as 1:0.05 before constructiong retaining wall and thus causes poor compaction at backfill which may induce instability during or after the construction. To overcome this problem, precast concrete panel retaining wall was attached in-situ ground (so called top-down). This paper presents the evaluation of drainage capacity of top-down method which has impermeable layer between panel and mortar being used to increase the ability of attachment of the precast concrete panel.

• Land and Housing Review
• /
• v.13 no.1
• /
• pp.113-129
• /
• 2022

A building's eco-friendliness is directly related to various values including the life cycle cost of a building. However, the conventional architectural design method has a limitation in that it cannot create an optimized case according to the surrounding environmental conditions. Therefore, the purpose of this research is to present a design assistance tool that can review planning cases optimized for the environmental conditions of the building site in the planning stage of architectural production. To achieve the purpose of the study, an algorithm for realizing 3D modeling of the region and analysis of the solar environment was produced based on the site contours, building, and road information from the digital topographic map provided by the National Geographic Information Institute. To examine the validity of the developed algorithm, a comparative experiment was conducted targeting the elevation direction of the existing building. As a result, it was found that the optimal elevation direction selected by the algorithm can receive higher insolation compared to the front facade of the main building.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.8
• /
• pp.23-28
• /
• 2022

In Korea, 70% of the land is mountainous and structures occupy a high proportion in railway and road construction. In particular, in recent years, the construction of high-speed railways and highways for high-speed driving is rapidly increasing. At the same time, the construction of tunnels is also increasing. The number of tunnel construction cases in which long-term deformation occurs after tunnel excavation is completed is increasing. The stability of these tunnel structures depends entirely on the characteristics of the rock surrounding the tunnel excavation. In the case of pyroclastic rock, which is the subject of this study, it is generally vulnerable to weathering and has a characteristic that its strength decreases over a long period of time. Tunnel design and construction planning considering the strength characteristics of pyroclastic rocks are essential. This study analyzed the cases of over-deformation that occurred at the tunnel site in the pyroclastic section. Based on this study, a plan for tunnel design and construction management in an area where pyroclastic rock exist in the future is presented.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.34 no.3
• /
• pp.89-107
• /
• 2023

Public libraries should plan and provide services that satisfy various needs of the local community users. In order to understand library users, it is essential first to grasp the service areas of libraries. The current service areas of public libraries are primarily set based on administrative boundaries of the areas where the libraries are located, which limits the consideration of actual user access patterns to the libraries. In this study, we aim to create service areas that incorporate the transportation and geographical characteristics of the library's surroundings and reflect the access patterns of library users. Specifically, we utilized street network data from 502 libraries in 7 metropolitan cities to determine the travel distance and time from user locations, considering gradients, to the libraries. Subsequently, we applied the shortest path algorithm to generate service areas within a 30-minute walking or driving range. As a result, we confirmed that there are differences in the service area patterns of libraries depending on topographical factors, and this better reflects the realistic conditions of library access compared to service areas based on straight-line distances. This method of generating service areas contributes to a more accurate understanding of library users' numbers, characteristics, and needs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.387-387
• /
• 2020

본 연구에서는 LIP에 의한 극한강우로부터 발생되는 극한홍수량을 산정한다. Huff 형 강우시간 분포를 기후변화 시나리오별로 적용하고, 원전주변지역에서의 상세한 토지이용조건의 변화를 고려하여 빈도별 홍수량을 산정한다. 외부침수해석의 정교화를 위한 상세 지형자료를 구축하고, 원자력발전소 부지의 상세 DEM 자료를 생성한다. 이를 위해서 원자력발전소 부지에서 건물, 연석, 도로 등의 영향을 분석하고 토지이용상황에 따른 조도계수를 산정한다. 또한 원전지역에서의 외부침수재해도 분석을 위해서 국립해양조사원에서 검토한 기후변화를 고려한 조위분석 자료를 외부경계조건으로 설정한 후 부지에 대한 2차원 수리분석을 실시한다. 침수심, 침수유속, 침수시간, 침수동압력 분석 등 2차원 침수해석결과를 바탕으로 발생빈도별 침수심, 침수강도 등의 정량적인 분석을 통해서 빈도별 재해도 곡선을 개발한다. 그리고 원전지역에서의 외부 침수에 대한 대표적인 재해도 곡선을 산정하기 위하여 재현기간별 지속시간에 따른 침수심을 분석하고 정리한다. 재현기간별 침수심에 대해 확률 분포형을 적용하기 위해서 AIC검증을 통한 분포형의 적합성을 분석을 실시한다. 또한 재현기간별 지속시간에 따른 침수심들 간의 상관관계를 분석하여 분포형에 적용한다. 적용된 분포형을 몬테칼로 시뮬레이션을 통한 대표적인 확률론적 외부 침수 재해도 곡선을 산정한다. 본 연구를 바탕으로 원전 부지 및 그 부속 시설물(SSC)의 홍수방지 기능과 홍수 대비 시설물에 대한 적용 절차의 신뢰성, 홍수 저감 및 대응 전략에 대한 정량화가 가능하여 원전 홍수 위험에 대한 정량적인 평가 지원이 가능하겠다. 고려할 외부 홍수와 관련된 원전 내부시설 및 장비에 대한 상세한 모델링 절차, 특정 시나리오에 대한 홍수 방지 및 예방과 관련한 SSC의 정량화, 홍수저감 활동과 관련된 통제실 외부 시설물에 대한 수동 조작에 대한 평가가 이루어질 수 있겠다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.325-333
• /
• 2006

Recently, in the case of observing the global environment, satellite remote sensing technology has been important. It's because satellite remote sensing is valuable for assessing relatively large areas. But now, small scale remote sensing techniques are needed which can be applicable to the detail investigation of plant tree areas which afforest land after the large scale construction of roads, dams and airports. In this study, we tried to develop and propose a lower altitude sensing technique which can be used in ground remote sensing by using a CCD camera. As a result of this investigation the following can be concluded: We recognized the transference characteristics of filters which were used in comparative tests about the four ground remote sensing devices. We also found that the near-IR camera could be used for an imaging spectral radiometer in the extraction of the vegetation index. Furthermore, we found that the vegetation index has varied hour by hour during the day of the experiment. Finally, we brought about an increase phase of the NDVI in a forest fire, which caused considerable damage, by developing new ground remote sensing technology.

• Korean Journal of Environment and Ecology
• /
• v.34 no.5
• /
• pp.425-435
• /
• 2020

This study aims to investigate the impact of the physical structure, such as altitude, slope gradient, slope direction, and topographical structure, and the vegetation pattern, such as existing vegetation, diameter of breast height (DBH), and crown density, on climate. The analysis results showed the significant difference in relative humidity, wind speed, and solar radiation at varying altitudes, the significant difference in all climate factors except for the wind speed at varying slope gradient, and significant difference in temperature and relative humanity at varying slope direction. The topographic structures were divided into valleys, slopes, and ridges. They were found to differ in relative humidity. However, the differences between constant trends and types were found to be insignificant concerning temperature, wind speed, and solar radiation. Significant differences in temperature, relative humidity, and wind speed were recorded with changing existing vegetation. The DBH showed a significant difference in temperature, wind speed, and solar radiation. The crown density showed a significant difference in temperature and solar radiation. The result of the relationship analysis for the analysis of the effect of vegetation pattern and physical structure on the meteorological environment showed that temperature was affected by slope gradient, slope direction, DBH, and crown density. The relative humidity was correlated with the altitude, slope gradient, slope direction, and topological structure in physical structure and the existing vegetation and crow density in vegetation pattern. The wind speed was correlated with the altitude, existing vegetation, and DHB, and the solar radiation was correlated with the slope gradient, DHG, and crown density. The crown density was the most overall significant factor in temperature, relative humidity, and solar radiation, followed by the slope gradient. DBH was also found to be highly correlated with temperature and solar radiation and significantly correlated with wind speed, but there was no statistically significant correlation with relative humidity.

• Journal of Environmental Policy
• /
• v.11 no.3
• /
• pp.25-47
• /
• 2012

This research is to suggest an ecological management methods by classification of biotope type and its mapping for Tricholoma matsutake. The target area was construction site of the East Hongchun - Yangyang Highway (Yangyang section) where massive production of Tricholoma matsutakes is in place. Specifically, the 700 m long range of area around the road route, Yangyang section, which is over a total area of $19,79km^2$. The flow of this research was as follows: first studied were the characteristics of the Yangyang Tricholoma matsutakes; second, reviews on previous studies on Tricholoma matsutakes; third, the formulation of standards and processes of biotope type considering Tricholoma matsutake production; and fourth, mapping of biotope considering the production area of Tricholoma matsutake. In 24.77% of the region, slope angle measured $30{\sim}40^{\circ}C$, which is suitable for Tricholoma matsutake production. Also, 17.44% of the region had southward vegetation structures, and as for the Pinus densiflora; 26.00% had average receipts; the tree ages was $38{\pm}8.34$ years; and the average density of canopy layer was $9.55{\pm}4.89/100m^2$. The soil acidity (pH) values of 5.0 to 5.6(47.96%) > 5.6 to 7.0(42.90%) > 4.0 to 5.0(9.14%) were slightly high for Tricholoma matsutake growth; but 57.10% of the area had a soil pH of 4.0-5.6. The organic horizon (A0 layer) was $3.39{\pm}2.14cm$, and the mean depths were 4-6cm(78.03%) > 0-2cm(18.10%) > 2-4cm(3.87%). Based on the results of previous studies and field researches on the presence of vegetation (the pine dominance ratio), the topographic structure (the terrain characteristics and slopes), the receipt, the soil structure (the soil acidity and the organic layers interposed between the depths), and the vegetation density, six clusters based on the identified types of biotopes are produced in this paper. Area of distribution according to the type of biotope was Tricholoma matsutake of the potential-production (II) biotope (32.86%) > Tricholoma matsutake of the inadequate-production biotope (22.17%) > Tricholoma matsutake of the adequate (II)-production biotope (17.79%) > Tricholoma matsutake of the adequate (I)-production biotope (14.86%) > Tricholoma matsutake of the potential-production (I) biotope (9.77%) > Tricholoma matsutake of the produced biotope (2.55%).