• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1055-1067
• /
• 1994

This paper is presented to perform linear dynamic analysis of bridges due to vehicle moving on bridges. The road surface roughness and bridge/vehicle interaction are also considered. The bridge and vehicle are modeled as 3-D bridge and vehicle model, respectively. The road surface roughness of the roadway and bridge decks are generated from power spectral density(PSD) function for good road. The PSD function proposed by C.J. Dodds and J.D. Robson is used to describe the road surface roughness for good road condition. The vehicles are modeled as two nonlinear vehicle model with 7-D.O.F of truck and 12-D.O.F of tractor-trailer and the equations of motion of the vehicles are derived using Lagrange's equation. The main girder and concrete deck are modeled as beam and shell element, respectively and rigid link is used between main girder and concrete deck. The equations of motion of the vehicles are solved by Newmark ${\beta}$ method and the equations of the motion of the bridges are solved by mode-superposition procedures. The validity of the proposed procedure is demonstrated by comparing the results with the experimental data reported by the AASHO Road Test. The comparison shows that the agreement between experiment and theory is quite satisfactory.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.1-11
• /
• 2010

Unlike the previous studies which have focused on 2-dimensional urban characteristics, this paper presents statistical models explaining urban heat island(UHI) effect by 3-dimensional urban morphologic information and addresses its policy implications. 3~dimensional informations of Columbus, Ohio arc captured from LiDAR data and building boundary informations are extracted from a building digital map, Finally NDV[ and temperature data are calculated by manipulating band 3, band 4, and thermal hand of LandSat images. Through complicated data processing, 6 independent variables(building surface area, building volume, height to width ratio, porosity, plan surface area) are introduced in simple and multiple linear regression models. The regression models are specified by Box-Tidwell method, finding the power to which the independent variable needs to raised to be in a linearity. Porosity, NDVI, and building surface area are carefully chosen as explanatory variables in the final multiple regression model, which explaining about 57% of the variability in temperatures. On reducing UHI, various implications of the results give guidelines to policy-making in open space, roof garden, and vertical garden management.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.2
• /
• pp.27-37
• /
• 2001

Using satellite image and GIS, spatial distribution characteristics of black locust forest as honey plant area was identified and analyzed. Upon the result, the most suitable area for black locust forest was selected through the integration analysis of transparent overlay. The variables used for spatial analysis such as topography(elevation, aspect, slope), soil, drainage, distance from urban area, land use, meteorological elements were considered. Based on the suitability analysis, it was clarified that the integration of linear and factor combination technique is greatly efficient method for the most suitable area. In addition, Gokung, Imgo, Chungtong, Hwanam area were shown to be suitable in Young-chun Area. As the result of suitability analysis for honey plant area of black locust in Young-chun using satellite image and GIS, the present portion of potential distribution area was produced about 42.53%. The portion of most suitable area for honey plant area of black locust was about 26.77%. Finally, the total area for honey plant area of black locust in Young-chun came up to $15.79km^2$. Additionally, satellite image and GIS were expected to be significant tools for suitability analysis of honey plant complex area.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.37-49
• /
• 2014

This paper aims to interpret the transformation process of town plan of Gosan-up(高山), which was provincial administrative focus town in Josun dynasty, basing on morphological viewpoint. Morphological concepts, such as morphological frame, urban plan, kernel, colonization, route system, fixation line, fringe belt, plan unit & plan division, morphological period derived from the study of Conzen, M.R.G. and Caniggia, G. epidome district, break point, broken plot, urban fallow, privatization are adopted for the interpretation of urban form. Morphological period of Gosan can be divided in four ; formation of kernel & morphological structure, disintegration & redevelopment of the kernel, augmentative development of the kernel & formation of modern epidome district, outwards expanding of urbanized area, transition & reorganization of epidome district. Especially public leading projects such as construction of new regional connection road and public facilities such as myeon(township) office, agricultural cooperatives federation office, market, are main factors of morphological transformation of townplan. In the early stage, under the Japanese imperialism, construction of the new matrix route(Gosan-ro) through the kernel and followed planned routes gave way to disintegrating traditional areal plan unit and forming small block plan units in administrative facilities area. And linear plan units with commercial buildings were formed along the new matrix route and planned route adjacent to periodical market. In the latter stage, with development of public facilities, private sectors' large circulation institution and terminal outside the kernel with planned routes formed areal block based plan units with commercial and public buildings. And part of the spatial area with the linear plan unit were turned into urban fallow. With the transformation of town plan, new roads outside the kernel have substituted for traditional fixation line of waterway with road and topographical feature. Fringe belts were made successively along the new road and around the major intersections outside of existing urbanized area. Land use in fringe belts, constituting of outer locational tendency early on formation, was gradually replaced with commercial & business buildings.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.113-124
• /
• 2006

Among tile traffic safety facilities, median barriers are installed above 4-lane national roads due to the awareness of haying an effect on preventing the front collision. Studies about the installation effect analysis of median harrier have been carried out through both at home and outside, mainly indicating total accident reduction effect on pertinent sections. In sum, study about how the accident occurrence form is changed at the point classified by the accident type or severity is insignificant. In the case of outside the country, calculating the accident reduction effect according to the type of median barriers is main research and in domestic, though there is a part of researches assessing reduction effect by accident types, it is not reliable in the view or statistics because of using only 1year's before-aftev data installing the facility, So in this Paper. it is the main purpose to presume the accident conversion effect. For this, we conduct an investigation and collect data about 7-year's accident data containing before-after Project, safety facilities foundation records and index of road alignment on the subject of 4-1ane national roads(108.6km) existing median barrier. Next. using the empirical bayes method, we estimate a model construction and accident conversion effect of accident type severity. We expect the result or this Paper will be applied for a policy execution and Presentation of facility standard related to median barrier from now on.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.490-497
• /
• 2020

Asphalt pavement accounts for more than 90% of the total pavement in Korea. Pavement is most widely constructed among construction structures. The heat transfer characteristics (Thermophysical Properties) of the asphalt pavement cause the heat island effect in downtown areas. An increasing asphalt surface temperature is one of the major causes of damage to asphalt pavement. This study examined the heat transfer characteristic factors according to solar energy accumulation in an asphalt mixture. The specimens (WC-2 & PA-13, Recycled aggregate used WC-2) used in the experiment were compacted with a Gyratory Compactor. The thermo-physical properties (thermal conductivity, specific heat capacity, thermal diffusivity, and thermal emissivity) and solar energy accumulation were evaluated. The thermal accumulation and HFM tests revealed a 1.2- to 2.0-fold difference. This indicates that the thermal conductivity of the asphalt mixture pavement changes with the accumulation of solar energy. An analysis of the correlation of thermal conductivity according to the surface temperature of the asphalt mixture showed that WC-2 was logarithmic, and PA-13 was linear. Experiments on the heat transfer characteristics of asphalt pavement that can be used for thermal failure modeling of asphalt were conducted.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.89-98
• /
• 2016

In this paper, we proposed an automated areal feature matching method based on geometric similarity without user intervention and is applied into areal features of many-to-many relation, for confusion of spatial data-sets of different scale and updating cycle. Firstly, areal feature(node) that a value of inclusion function is more than 0.4 was connected as an edge in adjacency matrix and candidate corresponding areal features included many-to-many relation was identified by multiplication of adjacency matrix. For geometrical matching, these multiple candidates corresponding areal features were transformed into an aggregated polygon as a convex hull generated by a curve-fitting algorithm. Secondly, we defined matching criteria to measure geometrical quality, and these criteria were changed into normalized values, similarity, by similarity function. Next, shape similarity is defined as a weighted linear combination of these similarities and weights which are calculated by Criteria Importance Through Intercriteria Correlation(CRITIC) method. Finally, in training data, we identified Equal Error Rate(EER) which is trade-off value in a plot of precision versus recall for all threshold values(PR curve) as a threshold and decided if these candidate pairs are corresponding pairs or not. To the result of applying the proposed method in a digital topographic map and a base map of address system(KAIS), we confirmed that some many-to-many areal features were mis-detected in visual evaluation and precision, recall and F-Measure was highly 0.951, 0.906, 0.928, respectively in statistical evaluation. These means that accuracy of the automated matching between different spatial data-sets by the proposed method is highly. However, we should do a research on an inclusion function and a detail matching criterion to exactly quantify many-to-many areal features in future.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.61-68
• /
• 2016

Digital aerial images have been commonly used in a large scale map production owing to their excellent geometry, and high spatial and radiometric resolution in recent years. However, a quality verification process for acquired images should be preceded in order to secure the high precision and reliability of produced results. Several experimental studies to verify digital imaging systems have been vigorously researched by constructing permanent test field in abroad. On the other hand, it is urgently necessary to suggest a practical scheme for an image quality verification, because this related study and experiment are still in its early stage at home. Hence, this study aims to present an easy method to measure the spatial resolution of the image in a visual way using a portable Siemens star. The images used in the study were obtained with three different cameras, two frame array sensors of DMC, UltraCamXp and a linear array sensor of ADS80. The Siemens star target appeared in every image is extracted and then the spatial resolution of image is compared with theoretical GSD(Ground Sample Distance) by a visual method. In addition, the change of spatial resolution depending on the location of the Siemens star from image center and flight direction and cross-flight direction is also compared and analyzed. As study results, while the theoretical GSDs of images taken with each camera are about 6~9cm, the visual resolutions are 1.2~1.3 times as great as the theoretical ones.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.4
• /
• pp.97-107
• /
• 2014

Finite element modelling and analysis were conducted for the roll-type steel mats which were placed on loose sand and subjected to a standard truck wheel load in this study. The roll-type steel mats mean that the steel mats can be folded as a circle shape for the carrying to fields in cold regions where workability is limited and are developed for a rapid rehabilitation method for roadway across soft ground which is caused by thawing during the summer season in cold regions. The model is composed of link elements to simulate nonlinear behavior of connections between steel mats, thick shell elements to have flexural stiffness of the steel mats, and springs to simulate characteristics of foundation soils. The structural behaviors of the shell, link elements, and springs were verified at each modelling step through experiment and analysis. Beam and shell analysis without the link elements were conducted and compared to results obtained from the model presented in this study. Significant vertical displacement is shown in the shell model with hinge connections. Therefore, the results demonstrate that the analysis model for the roll-type steel mats on loose sand needs further detail parametric studies.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2015

This paper introduces the development of imaging luminance meter which measures the luminances of external/internal road tunnel. The developed imaging luminance meter complies with both L20 method and Veiling luminance method of the international standards, CIE88. In this paper the L20 method is mainly presented because most of tunnels currently adapt L20 method. The developed system has an embedded computer to operate at stand-alone. The system has a ethernet port, a heater, a fan, a defroster, a wiper and sun shielder. Compensation algorithm is applied for correcting non-linear responses to the luminance and integration time. The accuracy of measurement is less than 1% when it calibrated at the public certification institute. The developed system was also tested at the real field, road tunnel. The test results were very similar with the reference luminance meter and showed that the developed system operates well at the real field. Partial sensor saturations were happened to show the less luminance, because there were the high reflecting objects in the real field. Further study should be followed for high luminance measurement.