A Study on the Dynamic Response of Steel Highway Bridges Using 3-D Vehicle Model

3차원(次元) 차량(車輛)모델을 사용(使用)한 강도로교(鋼道路橋)의 동적응답(動的應答) 관(關)한 연구(硏究)

  • 정태주 (명지대학교 공학기술연구소) ;
  • 박영석 (명지대학교 토목공학과)
  • Received : 1994.03.29
  • Published : 1994.09.30

Abstract

This paper is presented to perform linear dynamic analysis of bridges due to vehicle moving on bridges. The road surface roughness and bridge/vehicle interaction are also considered. The bridge and vehicle are modeled as 3-D bridge and vehicle model, respectively. The road surface roughness of the roadway and bridge decks are generated from power spectral density(PSD) function for good road. The PSD function proposed by C.J. Dodds and J.D. Robson is used to describe the road surface roughness for good road condition. The vehicles are modeled as two nonlinear vehicle model with 7-D.O.F of truck and 12-D.O.F of tractor-trailer and the equations of motion of the vehicles are derived using Lagrange's equation. The main girder and concrete deck are modeled as beam and shell element, respectively and rigid link is used between main girder and concrete deck. The equations of motion of the vehicles are solved by Newmark ${\beta}$ method and the equations of the motion of the bridges are solved by mode-superposition procedures. The validity of the proposed procedure is demonstrated by comparing the results with the experimental data reported by the AASHO Road Test. The comparison shows that the agreement between experiment and theory is quite satisfactory.

본 연구에서는 교량과 차량을 3차원으로 모델링하고, 교량의 노면조도 및 교량과 차량 사이의 상호작용력을 고려하여 이동차량이 교량올 통과할 때 교량의 선형 동적해석을 수행할 수 있는 해석방법을 제시하였다. 교량의 노면조도는 평균값이 영인 정상확율분포로 가정한 지수 스팩트럴 밀도(PSD)를 사용하여 생성시켰다. 이 때 지수 스팩트럴 밀도는 양호한 도로에 대하여 C.J. Dodds와 J.D. Robson이 제안한 PSD값을 사용하였다. 차량은 트럭과 트랙터-트레일러를 각각 7-자유도와 12-자유도를 갖는 3차원차량으로 모델링하였고, 차량의 운동방정식은 Lagrange 방정식을 사용하여 유도하였다. 교량은 주형을 보요소로 이상화시키고 콘크리트 바닥판을 쉘요소로 이상화시켰으며 주형과 콘크리트 바닥판을 Rigid Link로 연결하여 3차원으로 모델링하였다. 차량의 운동방정식은 Newmark ${\beta}$법을 사용하고 교량의 운동방정식은 모우드 중첩법을 사용하여 풀었다. 본 연구에서 제시한 해석방법의 타당성을 검토하기 위하여 "AASHO Road Test"에서 실시한 단순 강합성교의 실험결과와 본 연구에서 제시한 해석적인 방법으로 구한 값을 비교하였다. 해석 결과, 본 연구에서 제시한 해석적인 방법으로 구한 값과 실험값이 매우 잘 일치하였다.

Keywords

Acknowledgement

Grant : 93년 핵심전문연구

Supported by : 한국과학재단