• Journal of Korean Society of Transportation
• /
• v.16 no.1
• /
• pp.151-164
• /
• 1998

본 논문은 통행배정과 교통신호제어기의 결합문제를 풀기 위한 새로운 해법의 제시를 목적으로 한다. 통행배정과 신호제어 결합모형은 네트웍 디자인 문제(Network Design Problem)로 비선형 비분리 목적함수(Nonlinear and Nonseparable Objective Function)와 비선형제약 및 비컴백스 집합(Nonlinear and Non-Convex Set)형태로 인해 다수의 국지해(Multiple Local Optima)를 갖는 특징이 있다. 따라서 이렇게 복잡하고 난해한 문제를 푸는 해법은 많은 국지해중에 가장 최소한 값(Global Optima)을 찾을수 있는 방법을 제공하여야한다. 전체최적해(Global Optima)를 찾 을 수 있는 기존의 방법들은 확률적최적화방법(Stochastic Optimization Methods)에 속한다. 본연구에서는 이러한 방법중 금속공학에서 발 견된 모의담금빌법(Simulated Annealing Method)에 근거한 해법을 제시한다. 이방법이 통행배정과 신호제어 결합문제에 적용되는지 검토하기 위해 이해법의 수렴성(Convergence)을 증명했으며 또한 실제 프로그램된 모형을 작은 고안된 네트워크에 적 용했다. 마지막으로는 개발된 해법의 실용성을 실험하기 위해 두 가지의 보다 큰 도로망에 적용 및 분석을 했다.

• 한국도로학회지:도로
• /
• v.5 no.4 s.18
• /
• pp.36-46
• /
• 2003

포장구조체에서 요구되는 강도를 갖게 하는 구조 설계의 방법은 경험적 절차부터 반역학적 절차까지 발전되어 왔다. 재생 가열아스팔트혼합물이 기존의 가열아스팔트혼합물(HMA)과 비교하여 비슷하거나 때에 따라 더 좋은 성능을 가져오므로, AASHTO설계지침서에서는 본질적으로 재생(recycled) HMA 재료와 신생(virgin) HMA 재료간의 차이가 없다고 기술하고 있으며, 기존 HMA 재료에 사용되는 덧씌우기설계법의 구조회복 분석방법(structural rehabilitation analysis method)을 재생포장설계에도 권장하고 있다. 재생 가열아스팔트의 설계를 위한 AASHTO 방법은 설계교통량, 교통량 및 수행능력예측의 신뢰수준, 공용기간, 그리고 포장상태 평가지수에 의하여 결정된 포장구조체에서 요구되는 포장두께지수(SN)에 기초한다. 포장두께지수(SN)는 포장층 두께, 상대강도계수, 각 층의 배수조건들의 곱의 조합으로서 나타내어질 수 있다. 덧씌우기로 간주될 수 있는 재생된 층의 포장두께지수(SN)는 기존 포장에서의 포장두께지수와 보강된 포장에서 요구되는 포장두께지수의 차이에 의하여 계산되어질 수 있다. 상대강도계수의 값은 AASHTO 설계지침에 명시되어 있다. AI 방법은 교통량, 노상의 회복탄성계수, 그리고 설계두께를 계산하기 위한 표층과 기층의 종류를 사용한다. 이 방법은 재생된 가열혼합물질과 기존의 가열혼합물질과는 거의 비슷한 성능을 나타낸다고 본다. 또다른 AI 방법에 의하면 재생된 층은 덧씌우기층이라고 간주하고, 현재의 포장두께와 요구되어지는 포장두께 사이의 차를 이용하여 재생될 층의 두께를 산정한다. 소요되는 덧씌우기 두께는 포장의 현장 상태지수(condition rating)와 각 종류에 따른 포장체와 포장재료가 아스팔트 콘크리트층의 등가두께로 전환되어 나타나는 방법에 근거하여 결정될 수 있다. 또 다른 방법은 포장체 각 층의 물성과 하중을 이용한 컴퓨터 프로그램에 의하여 산정된 하중-변형 응답에 의한 설계 방법을 포함한다. 이런 방법들에서는 포장체는 탄성이나 점탄성층 위에서 탄성이나 점탄성 거동을 보인다고 가정한다. 재생 상온혼합물에서의 AASHTO 설계 방법은 가열혼합물의 설계방법과 유사하다. 그러나, 재생 상온혼합물에서의 상대강도계수는 시공방법에 좌우되므로, 기술자의 판단을 근거로 하여 결정되어져야 한다. AI방법에서는 포장구조체를 다층탄성구조라고 보고, 노상의 강도와 설계 교통량을 근거로 요구되는 포장두께를 결정한다. 재생 상온혼합물 기층의 두께는 재생 상온혼합물 기충 위에서 가열아스팔혼합물에 대하여 산정된 덧씌우기 두께를 이용하여 결정할 수 있다. 아스팔트 표면의 재생은 기존 포장의 구조적 능력을 정상적으로 개선할 수 없으므로, 표면 재생의 두께를 설계하는 방법은 없다. 그러나, 임의의 덧씌우기 두께는 기존의 덧씌우기 설계법에 기초하여 산정 할 수 있다. 만약 덧씌우기가 승차감만을 개선시킨다고 여겨진다면, 혼합물에서 사용되어지는 최대 골재 크기에 기초한 최소 두께를 결정할 수 있다.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.61-72
• /
• 2011

In the benefits of ITS, there are intangible gains from real-time traffic information as well as classical gains such as travel time saving. These intangible gains are difficult to be estimated by existing transportation investment appraisal commonly used in SOC investment. The major reason is not because of the absence of methodology but because of the absence of generalized values of particular benefits from real time traffic information. This research explores the value of real-time traffic information on VMS that is the most representative of ITS services, by using CVM with Double Bounded Dichotomous Choice Question. Willingness-To-Pay (WTP) functions of drivers are built with survival functions using various types of probability distribution functions such as Exponential, Log-logistic, and Weibull functions. The results reveal that Log-logistic distribution is the most appropriate distribution model to estimate WTP, and the estimated coefficients are stable through LR (Likelihood Ratio) test. For the further study, it is recommended to perform statistical tests of temporal and spatial transferability that is not examined in this research due to the lack of data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.240-242
• /
• 2012

2011년 6월 '해상교통안전법'이 '해사안전법'으로 전부 개정된 후 진단시행지침의 전부 개정을 통해 선박안전기술공단 해사안전연구센터가 진단전문기관으로 지정되었다. 하지만 국가업무를 대행 또는 위탁하는 형식이 아닌 진단서에 대한 의견을 제시하는 수준으로 전문기관의 설립 및 역할이 불명확하여 정부의 예산지원이나 수수료 등의 징수 근거로 한계가 있는 것으로 조사되었다. 따라서 본 연구에서는 도로교통안전진단, 시설물안전진단, 환경영향평가 등 유사제도의 전문기관 운영현황을 분석한 결과, 법에서 전문기관의 존재 및 역할을 명확히 규정하여 정부의 예산지원이나 수수료 등 징수근거가 명확한 상태에서 전문기관의 역할을 수행하고 있으며, 담당 공무원의 업무 연속성 및 전문성 부재로 제도의 효율적 운영을 위해서는 전문기관의 역할 및 권한 확대와 더불어 진단기술관련 역량 강화를 통해 전문성 향상이 필요한 것으로 조사되었다. 향후과제로 안정적인 전문기관의 역할 수행을 위해 관련법령을 정비하여 전문기관의 설립 및 업무 위탁을 명확히 규정할 필요가 있다.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.203-213
• /
• 2005

Recently, with the increase of the interest to global environmental problems, bicycle has been recognized as the most environmentally friendly transportation mode. To promote cycling, it is necessary to ensure road space that bicycle can keep running safely and smoothly. This paper aims to evaluate the district with rearranged road space and network, given priority to bicycle, comparing the traditional district which are given priority to car from viewpoints of environment, safety and accessibility. As evaluation indicators, the carbon dioxide emission on the environment. the number of collision between car and bicycle on safety and an accumulated frequency measure on accessibility were used. As the result, it was clarified that bicycle road measures to create bicycle road by reallocation of road space and form bicycle exclusive network were effective.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.276-285
• /
• 2008

Traffic monitoring method is mainly loop detector and piezo sensor. But this method is only detecting the number of vehicle. Monitoring traffic volume is not checking the number of vehicle but checking the length of access road, width of road, number of passing people,passing vehicle,delayed vehicle. The traffic signal control cycle is not fixed by only passing vehicle number but all related traffic proposal. This paper proposed selecting common characteristic out of each unrelated traffic proposal through Analytic Hierachy Process and this characteristic is applied to compose fuzzy sensor algorithm which find out new traffic volume concept of confusion degree. The accumulated delayed vehicle time is shorter in new fuzzy sensor algorithm applied by AHP than other traffic method

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.65-76
• /
• 2002

This study is realized using fuzzy evaluation and AHP(the analytic hierarchy process) for the optimum search of traffic route and estimated by the quantitative analysis in the vague subjective judgement. It is different from classical route search and noticed thinking method of human. Appraisal element, weight, appraisal value of route is extracted from basic of the opinion gathering fur the driving expert and example of route model was used for the finding of practice utility. Model assessment was performed attribute membership function making of estimate element, estimate value setting, weight define by the AHP, non additive presentation of weight according to $\lambda$-fuzzy measure, Choquet fuzzy integral.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.125-131
• /
• 2006

Recently, flowerbed median strips are being installed in urban highways for safety and scenery. In addition, efforts to enhance urban image through roadside flowerbeds and trees are being exerted for afforestation to enhance the urban environment. The sensibility of humans, such as the feeling of agreeableness of drivers must be considered when planning roads. However, not many researches on users on road environment are being conducted. Accordingly, KANSEI Engineering that is attracting attention nowadays was applied to form the image or sensibility of humans as definite object, in order to grasp the relation between the personal attributes of users and road formation with sensible factors considered when the road users evaluates the road scenery. As the result of research, streetscape was not evaluated based on individual factors such as roads, trees and buildings that form roads, but was based on sensibility image based on harmony of the overall road formation according to the changes of each factors.

• Journal of Korean Society of Transportation
• /
• v.31 no.5
• /
• pp.48-59
• /
• 2013

Normally the benefits concerned in the feasibility study for highway constructions are travel time saving, vehicle operation cost, etc. which can be calculated using the simulation tool(EMME3). However, there must be extra benefits of driving amenity improvement that drivers can perceive through decreasing driving fatigue and improving driving comfortability. In this study, the definition of driving amenity was established and a method of estimation for the benefit of driving amenity improvement was developed. Highway type (urban/rural highway) and highway density was considered to estimate the driving amenity. And Double-bounded Dichotomous Choice among Contingent Valuation Method(CVM) was applied to survey the willingness-to-pay of drivers when highway density decreases. Finally the value of driving amenity was estimated using the results of survey and logit medel. As the existing highway density is high, willingness-to-pay increases in both urban and rural highways. Even though the changing rates of highway density are same, willingness-to-pay is different based on the existing highway density.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.9-20
• /
• 2023

For highway concrete structures, the deterioration of the structure is accelerated due to the increase in the use of deicing materials, and sectional repair work is being frequently carried out to restore performance. However, after the repair work, re-damage such as cracks, delamination, and poor bond performance is exhibited in the repaired sectional area. In this study, overseas repair material requirements were first analyzed, and present domestic requirements were improved repair material performance through field surveys of common concrete structures, laboratory experiments, and test construction on a disused concrete bridge. In addition, performancebased quality requirements were presented so that all materials that meet the required performance can be applied, and different test methods for each material were unified into concrete test methods for consistent test results analysis. The considered performance requirements were compression strength, bending strength, and bond strength for structural properties, and length change rate, crack resistance, thermal expansion coefficient, and elasticity coefficient were for dimensional behavior. For resistance to chloride penetration resistance and freeze-thaw resistance were presented as durability. The proposed requirements for concrete repair materials are expected to contribute to the improvement of the quality of concrete sectional repair work in Korea.