• 한국도로학회:학술대회논문집
• /
• 2004.10a
• /
• pp.355-362
• /
• 2004

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.79-88
• /
• 2007

Design Hourly Volume (DHV) is the hourly volume used for designing a section of road. DHV is also used to estimate the expected number of vehicles to pass or traverse the relevant section of road in a future target year. The Design Hour Factor (DHF) is defined as the ratio of DHV to Average Annual Daily Traffic (AADT). In addition to high precision of predicted traffic volume, in order to design a roadway to be the proper scale, applying appropriate DHFs considering traffic flow characteristics and type of area which surrounds the relevant roadway is important. This study categorizes sections of expressway (Suh Hae An Expressway) according to their area type and estimates DHFs utilizing traffic data obtained from a vehicle detection system (VDS). This study shows that DHFs calculated using VDS data are different from those using traffic data acquired from a coverage survey. While AADTs from both data show similar values, peak hour volumes from both data show significant differences especially for recreational areas. DHFs from the coverage survey are quite different from the values provided by the Korean design guide or previous research results and DHFs for urban areas are higher than recreational areas. However, DHFs from VDS shows similar values to previous research results. The result of this study suggests that using VDS for estimating DHFs is more reliable than using a coverage survey.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.199-209
• /
• 2008

This paper is described the concepts and limitations for the traditional directional design hour volume estimation. The main objective of this paper is to establish an estimation method of probabilistic directional design hour volume in order to improve the limitation for the traditional approach method. To express the traffic congestion of specific road segment, this paper proposed the link travel time as the probability that the road capacity can accommodate a certain traffic demand at desired service level. Also, the link travel time threshold was derived from chance-constrained stochastic model. Such successive probabilistic process could determine optimal ranked design hour volume and directional design hour volume. Therefore, the probabilistic directional design hour volume can consider the traffic congestion and economic aspect in road planning and design stage. It is hoped that this study will provide a better understanding of various issues involved in the short term prediction of directional design hourly volume on different types of roads.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.759-766
• /
• 2008

Road classification system is the first step for determining the road function and design standards. Currently, roads are classified by various indices such as road location and function. In this study, we classify road using various traffic indices as well as to identify traffic characteristics for each type of road. To accomplish the objectives, mixture model was applied for classifying road and analyzing traffic characteristics using traffic data that observed at permanent traffic count stations. A total of 8 variables were applied: annual average daily traffic(AADT), $K_{30}$ coefficient, heavy vehicle proportion, day volume proportion, peak hour volume proportion, sunday coefficient, vacation coefficient, and coefficient of variation(COV). A total of 350 permanent traffic count points were categorized into three groups : Group I (Urban road), Group II (Rural road), and Group III (Recreational road). AADT were 30,000 for urban, 16,000 for rural, and 5,000 for recreational road. Group III was typical recreational road showing higher average daily traffic volume during Sunday and vacational periods. Group I showed AM peak and PM peak, while group II and group III did not show AM peak and PM peak.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.32-38
• /
• 2018

Studies on classification of national roads have been continued, but there is little research on the classification of urban arterial roads. Due to the increase of traffic volume, urban arterial roads do not perform well as main roads. In this paper, the function of urban arterial road was established by using cluster analysis using traffic characteristics. Traffic characteristics such as traffic volume, weekend coefficient and speed coefficient were used to establish the functions of 55 main arterial roads in Seoul. The results of this paper are compared with those of the method using AADT. The method using AADT classifies the characteristics according to the traffic volume of the whole lane. In this paper, however, the results are derived using the traffic volume per lane reflecting the actual traffic volume. In addition, the functional classification of the arterial roads in Seoul was compared with the results of this paper to verify that the traffic characteristics were reflected. As a result, the method presented in this paper is more effective in showing traffic characteristics than the current highway functional classification method, and the functional classification system will be helpful for road extension and planning design.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.3
• /
• pp.14-24
• /
• 2006

There are many problems and limits in equipments being used for traffic-volume analysis in the country. And traffic-volume information acquired through existing equipments is not provided in real-time. In the case of urban, there are limits on guarantee of trust on comprehending a appropriate road-volume because of difficulty on analyzing traffic-volume density and time series. And it is difficult to applicate in deciding a road policy as existing equipments don't provide the control information of traffic-flow. Therefore, it is necessary to build a road-flow policy rapidly and accurately through the road-flow information that analyze post-processed statistics data using traffic-flow investigation based on real time. In this study, we developed TICS(Traffic Information Collection System) based on GPS which could transmit traffic information transformed from car location information to traffic control center. And we developed TCS(Traffic Control System) based on Web GIS, which could manage and analyze transmitted traffic information, and it could offer handled road-flow information to Web-site in realtime.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.269-279
• /
• 2020

Traffic estimation mainly involves surveying equipment such as automatic vehicle classification, vehicle detection system, toll collection system, and personnel surveys through CCTV (Closed Circuit TeleVision), but this requires a lot of manpower and cost. In this study, we proposed a method of estimating traffic volume using deep learning and stereo CCTV to overcome the limitation of not detecting the entire vehicle in case of single CCTV. COCO (Common Objects in Context) dataset was used to train deep learning models to detect vehicles, and each vehicle was detected in left and right CCTV images in real time. Then, the vehicle that could not be detected from each image was additionally detected by using affine transformation to improve the accuracy of traffic volume. Experiments were conducted separately for the normal road environment and the case of weather conditions with fog. In the normal road environment, vehicle detection improved by 6.75% and 5.92% in left and right images, respectively, than in a single CCTV image. In addition, in the foggy road environment, vehicle detection was improved by 10.79% and 12.88% in the left and right images, respectively.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.105-114
• /
• 1998

Roundabout의 교통운영 특성에 대한 연구에서는 5거리 도로체계의 올바른 분석과 로타리에서 일어나는 진입로의 교통량, 회전교통량, 속도, 거부gap, 수락gap, 추종간격, 기하구조등을 조사 분석하여 수락간격 모형을 바탕으로 비신호교차로의 용량산정과 지체시간을 산정하기 위한 모형을 구축하는데 있다.

• Transportation Technology and Policy
• /
• v.1 no.3
• /
• pp.201-210
• /
• 2004

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.39-46
• /
• 2005

This paper use virtual running after possible traffic capacity application for optimal route location. General road is designed the design after we examine an alternate adequacy investigation and an execution design sufficiently. Various road user's requirement must be reflected from the beginning. But it is difficult to contain the various suitable design criteria because we consider the existing 2-dimension element. First of all, this study chose optimal route, used traffic assignment and 3D simulation. Then selected optimal route through the consistent road construction by analyzing road driving simulation of 3-dimension data and the urban landscape. possible traffic capacity and virtual running will be able to do the urban landscape analysis harmonizing with the environment; equally, it could be objectively solve the problem of a civil appeal.