• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.97-110
• /
• 2012

In case of the axial line bikeway, the residents in the riverside use it frequently but those in the city center hardly do as the axis is formed along the riverside of the Han river. This situation happens due to the inefficient connectivity between the bikeway that leads to the riverside and that in the city center, which means the administrative policies have been focused on the facilities rather than on raising connectivity of the bikeway networks in the south of the Han River. Also, this is the point of time when a reasonable improvement plan is needed to raise the accessibilities of the bikeways in Seoul, not just a utilization of those in the south of the Han River. This study intends to analyse the connectivity between Gangseo (west of the Han River) and Gangdong (East of the Han River) districts by comparing the current spatial structure in the southern areas of the Han River and that after the installation of the axial line, and that after installation of the ordinary bikeway respectively with use of the Space Syntax Model, and to predict resultant changes there of. The Space Syntax Model was used as the major method of analysis in this study to find out characteristics of the bikeways in the south of the Han River. Consequently, as the analysis shows that when the bikeways in the Gangseo and Gangdong-gu districts are connected, the accessibility of the bikeways in the south of the Han River will improve while the spatial structure intelligibility will be lowered, it can be said the prediction rate in the all areas is low compared with the current status. It is analyzed that the intelligibility of the current bikeways in the south of the Han River appeared highest when compared with those of plans for installation of the axial line and ordinary bikeway because they don't interconnect with other areas.

• 한국도로학회:학술대회논문집
• /
• 2009.11a
• /
• pp.661-664
• /
• 2009

• Spatial Information Research
• /
• v.22 no.1
• /
• pp.9-17
• /
• 2014

This study was intended to reliably predict the traffic green house gas emission in Daegu with the use of spatial statistical technique and calculate the traffic green house gas emission of each administrative district on the basis of the accurately predicted emission. First, with the use of the traffic actually surveyed at a traffic observation point, and traffic green house gas emission was calculated. Secondly, on the basis of the calculation, and with the use of Universal Kriging technique, this researcher set a suitable variogram modeling to accurately and reliably predict the green house gas emission at non-observation point suitable through spatial correlation, and then performed cross validation to prove the validity of the proper variogram modeling and Kriging technique. Thirdly, with the use of the validated kriging technique, traffic green gas emission was visualized, and its distribution features were analyzed to predict and calculate the traffic green house gas emission of each administrative district. As a result, regarding the traffic green house gas emission of each administration, it was found that Bukgu had the highest green house gas emission of $291,878,020kgCO_2eq/yr$.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.99-106
• /
• 2019

Technology that cannot be excluded from 4th industry is self-driving sector. The self-driving sector can be seen as a key set of technologies in the fourth industry, especially in the DB sector is getting more and more popular as a business. The DB, which was previously produced and managed in two dimensions, is now evolving into three dimensions. Among the data obtained by Mobile Mapping System () to produce the HD MAP necessary for self-driving, Point Cloud, which is LiDAR data, is used as a DB because it contains accurate location information. However, at present, it is not widely used as a base data for 3D modeling in addition to HD MAP production. In this study, MMS Point Cloud was used to extract facilities around the road and to overlay the location to expand the usability of Point Cloud. Building utility poles and communication poles DB from Point Cloud and comparing road name address base and location, it is believed that the accuracy of the location of the facility DB extracted from Point Cloud is also higher than the basic road name address of the road, It is necessary to study the expansion of the facility field sufficiently.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.832-835
• /
• 2007

The purpose of this study is to suggest the on-the-spot survey method of road occupation information. The on-the-spot survey method is proposed through the analysis of information searching function, document and process. The decision of road occupation permission and the grasp of illegal occupation status are closely connected with national rights and interests. To keep the road occupation permission and illegal occupation status, the easy acquisition of road occupation information is very important. But the person in charge of road occupation have a difficulty in obtaining occupation information because that information is still managed by paper drawing. Accordingly. this study develop the on-the-spot survey tool of road occupation using the occupation information that is managed by Construction Authorization & Permission System and the mobile techniques like UMPC. As the result of this study. the efficiency on the authorization. permission. and public grievance of construction project has improved

• Journal of Korean Society of societal Security
• /
• v.4 no.1
• /
• pp.29-37
• /
• 2011

Recently, Inhabitants nearby the high embankment road have requested a civil complaint on the environmental deteriorations and economic harms. This study was carried out numerical simulation using the 3-D microclimate model 'Envi-met' in order to investigate the variations of a flow field and a temperature field at the road sections with a high embankment and a bridge. About the simulation of flow field, the wind field has changed due to the disturbance of airflow by a high embankment road considerably. And the wind velocity decreased in the whole of simulation space widely. But, the wind velocity and wind direction sited loose to the section of a bridge, relatively. In the results of a temperature field, the slight variations of temperature field were discovered by the disturb of the mixing flow from a high embankment road. These results indicate that the numerical simulation can provide useful information to minimize the disasters, such as traffic accidents and various microclimatic environments in the transportation projects.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.459-467
• /
• 2014

The importance of fusion and association using established spatial information has increased gradually with the production and supply of various spatial data by public institutions. The generation of necessary spatial information without field investigation and additional surveying can reduce time, labor, and financial costs. However, the study of the integration of the newly introduced road name address map with the digital map is very insufficient. Even though the use of the road name address map is encouraged for public works related to spatial information, the digital map is still widely used because it is the national basic map. Therefore, in this study, building matching and update were performed to associate the digital map with the road name address map. After geometric calibration using the block-based ICP (Iterative Closest Point) method, multi-scale corresponding pair searching with hierarchical clustering was applied to detect the multi-type match. The accuracy assessment showed that the proposed method is more than 95% accurate and the matched building layer of the two maps is useful for the integrated application and fusion. In addition, the use of the road name address map, which carries the latest and most frequently renewed data, enables cost-effective updating of new buildings.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.689-695
• /
• 2011

In this paper, available power generation on the road from renewable energy technologies on how to use the piezoelectric effect has been studied. A lot of vehicles on road that can generate electricity using renewable energy technology as part of the external shock to convert the load into electrical energy using piezoelectric effect piezoelectric generator can be applied to road space. Piezoelectric power harvesting using piezoelectric ceramics for the development of impact load characteristics were tested as function of various experimental design such as generator design and array of piezo-ceramic. To design the piezoelectric generator, the characteristics of piezoelectric ceremic were compared depending on the type of impact load as function of impact load, shock-absorbing.

• 한국지형공간정보학회:학술대회논문집
• /
• 2004.10a
• /
• pp.175-181
• /
• 2004

우리나라에서는 1995년부터 국가지리정보체계(NGIS)구축 기본계획을 수립하여 건설교통부, 정보통신부, 과학기술부 및 행정자치부 등 범국가적으로 2000년까지 제 1단계 사업을 마쳤으며, 2001년부터 제 2단계 사업을 추진 중에 있다. 하지만 국가지형 및 시설물 등이 하루가 다르게 변화하는 정보화 사회에서 다양한 객체에 대한 위치 및 속성정보의 획득, 저장, 관리, 활용을 위한 신속한 수치지도 수정갱신이 요구된다. 또한 도로시설물을 비롯한 다양한 지형지물정보는 공간정보를 다루는 도시, 교통, 물류, 환경 및 군사 분야 등 다양한 분야에서 의사결정 및 계획에 필수적으로 요구되는 정보이고 이와 같은 정보는 신속하고 정확하게 취득되어야 하며, 경제적이며, 효율적으로 정보를 획득하는 신기술을 적용한 작업방법론이 필요하다. 현재 국내에서도 신기술인 "차량탑재 모바일매핑 시스템(Mobile Mapping System : GPS-Van) 개발이 완료되었고, 이를 활용한 각종 지형공간정보의 수정 갱신 작업이 이루어지고 있기 때문에 이를 활용한 수치지도 수정갱신의 가능성에 대한 검토와 방법론에 대한 정립이 요구되고 있다. 따라서 본 연구에서는 국내에서 개발된 신기술인 GPS-Van을 이용한 수치지도 수정갱신을 위한 정확도 분석 및 오차의 영향 분석을 통하여 보다 높은 정밀도의 도로기반 수치지도 수정 갱신의 가능성 및 방안을 제시하고자 한다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.551-557
• /
• 2004

미래의 텔레매틱스(telematics)환경에서 차량항법과 관련된 주요 핵심 기술은 동적 경로 안내 이외에 차량 자체의 지능화를 통해 운전자에게 주행 중인 도로에서 급경사, 급커브 구간에 대한 정보를 사전에 경고함으로써 사고를 방지하는 운전자 보조 및 경고 시스템(driver assistance and warning system) 구현으로 전망되고 있다. 이와 같은 기술이 구현되기 위해서는 현재 차량항법용 수치도로지도에서 도로의 단순 위치정보만으로는 불가능하며 도로의 곡선구간에서 평면 곡선반경과 같은 도로의 선형설계요소에 대한 정보가 필수적이다. 따라서 본 연구에서는 현재 전국적으로 구축되어있는 1/1000 수치지도의 도로중심선을 이용하여 실제 도로의 평면 선형설계요소를 자동으로 추출하기 위한 알고리즘을 개발하였고 이를 GUI 환경의 프로그램으로 구현함으로써 기존 도로의 정확한 평면 선형정보를 경제적이면서 효율적으로 획득할 수 있게 되었다.