• The Journal of the Acoustical Society of Korea
• /
• v.43 no.2
• /
• pp.178-183
• /
• 2024

This study introduces an enhanced sound source localization technique, bolstered by a data-driven deep learning approach, to improve the precision and accuracy of direction of arrival estimation. Focused on refining Time Difference Of Arrival (TDOA) based sound source localization, the research hinges on accurately estimating TDOA from cross-correlation functions. Accurately estimating the TDOA still remains a limitation in this research field because the measured value from actual microphones are mixed with a lot of noise. Additionally, the digitization process of acoustic signals introduces quantization errors, associated with the sampling frequency of the measurement system, that limit the precision of TDOA estimation. A deep learning-based approach is designed to overcome these limitations in TDOA accuracy and precision. To validate the method, we conduct comprehensive evaluations using both two and three-microphone array configurations. Moreover, the feasibility and real-world applicability of the suggested method are further substantiated through experiments conducted in an anechoic chamber.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.957-964
• /
• 2010

In this paper, we propose an indoor positioning algorithm based on 3 points near field angle-of-arrival estimation without side information. The conventional angle-of-arrival based positioning scheme requires the distance between the listener and the center of two points which is obtained by a received signal strength based range estimation. However, a received signal strength is affected by structure of room, placement of furniture, and characteristic of signal, these effects cause a large error to estimation of angle. In this paper, the proposed positioning scheme based on near field angle-of-arrival estimation can be used to estimate the position of listener without a prior distance information, just using time-difference-of-arrival information given from 3 points microphones. The performance of the proposed scheme is shown by cumulative distribution function of root mean squared error.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.753-757
• /
• 2003

In this paper, We propose an efficient iteration decoding control method with variable iteration decoding for iteration codes decoding. As the number of iterations increases, the bit error rate and frame error rate of the decoder decrease and the incremental improvement gradually diminishes. However, as the iteration decoding number is increase, it require much delay and amount of processing for decoding. Thus we propose variable iteration control method to adapt variation of channel using Frame Error-Check indicator. Therefore, the CRC method requires the fewest iterations and less computation than the CE method and the SCR methods.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.53-62
• /
• 2023

The purpose of this study is to find an optimized imaging technique and evaluate its usefulness by comparing and analyzing the difference in contrast enhancement of lower extremity artery according to the patient's heart rate during lower extremity Computed Tomography Angiography examination. From January 2022 to August 22nd, 139 outpatients who visited Ajou University Hospital and underwent lower extremity angio CT examination were targeted. According to the heart rate, the groups were divided into four groups: A(HR ≤65), B(65 < HR < 80), C(80≤ HR). In addition, among patients with a heart rate of 65 or less, the heart rate was considered, and the scan was divided into D, E, F group with a delay time. The time of arrival of contrast medium and the average value of contrast enhancement were compared and analyzed. As a result of quantitative evaluation, B and C groups with a heart rate of more than 65 times had better HU values in the popliteal artery than A group (HR ≤ 65), and D group showed better HU improvement effects compared to A group (p<0.001). The comparative analysis with other groups was insignificant. The difference in heart rate affected the angiographic intensity of the lower extremities artery. Therefore, it is effective to apply the appropriate test timing for each patient by using the heart rate during the lower extremity angio CT Scan.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.4
• /
• pp.339-349
• /
• 2010

The uses of the polypropylene bulk bags having the loading capacities more than 500 kg are increasing in Korea recently as a storage container for rough rice. This study was performed to obtain the basic information on the changes of temperature and relative humidity in the bulk-bag-stored high moisture rough rice during waiting for drying. At the moisture content more than 22% on wet weight basis of paddy, the bulk-bag inside temperature rose up to more than $40^{\circ}C$ and then slid down during storage. For example, in case of Hwaseongbyeo, 26.5% moisture content of rough rice (MCRR) harvested at 46 days after heading (DAH) showed $54.5^{\circ}C$ of peak temperature at 66.8 hours after bulk-bag loading, 22.5% MCRR harvested at 52 DAH exhibited $42.0^{\circ}C$ at 81.1 hours, and 19.7% MCRR harvested at 55 DAH displayed $38.9^{\circ}C$ at 119.0 hours. There were a good linear relationship between peak temperatures of bulk-bag inside and moisture contents of paddy ($r^2$=0.89 in 2005, and 0.87 in 2006), while the slope and intercept of the linear regression equation was affected by the environmental conditions such as ambient temperatures and microbial flora. The peak temperatures increased with the rate of about $2.74-3.33^{\circ}C$ per every 1% increase of moisture content at higher moisture contents of paddy than 19%. The relative humidity varied depending on bulk-bag inside temperature and rough rice moisture content, and showed the range of 94.2% to 99.9% in the central point of the bulk-bag. The results suggested that a rapid drying treatment as soon as possible was needed to produce a good quality of rice when the paddy of high moisture more than 22% on wet basis was harvested in a bulk-bag especially at high ambient temperature.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.411-418
• /
• 2016

In this paper, we developed a new method estimating the location of ballistic missile launching using infrasound signals. Infrasound signal generated from the North Korea's ballistic missile launch was used as source data and its signal was recorded at KMA (Korea Meteorological Administration) infrasound stations located at Cheorwon and Yanggu. Time-frequency analysis, TDOA (Time Delay of Arrival) method and spherical trigonometry were applied for data processing of signal recorded and occurrence location detection. We could confirm the outstanding performance of the algorithm estimating source location which was only 3 km apart from the actual launching site.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.22-28
• /
• 2001

This paper describes the implementation of a robust speaker position location system using the voice signal received by microphone array. To be robust to the reverberation which is the major factor of the performance degradation, low-frequency phase restoration algorithm which eliminates the influence of reverberations using the low-frequency information of the CPSP function is proposed. The implemented real-time system consists of a general purpose DSP (TMS320C31 of Texas instruments), analog part which contains amplifiers and filters, and digital part which is composed of the external memory and 12-bit A/D converter. In the real conference room environment, the implemented system that was constructed by the proposed algorithms showed better performance than the conventional system. The error of the TDOA estimation reduced more than 15 samples.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.353-360
• /
• 2004

In this Paper, We propose an efficient iteration decoding control method with variable iteration decoding of iteration codes decoding using Cyclic Redundancy Check. As the number of iterations increases, the bit error rate and frame error rate of the decoder decrease and the incremental improvement gradually diminishes. However, when the iteration decoding number is increased, it require much delay and amount of processing time for decoding. Also, It can be observed the error nor that the performance cannot be improved even though increasing of the number of iterations and SNR. So, Suitable number of iterations for stopping criterion is required. we propose variable iteration control method to adapt variation of channel using Frame Error-Check indicator. Therefore, the amount of computation and the number of iterations required for iteration decoding with CRC method can be reduced without sacrificing performance.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.6
• /
• pp.899-906
• /
• 1996

The physicochemical and microbiological studies were conducted to examine the effect of pineneedle(Pinu densinora Seib. et Zucc) sap on the Kimchi fermentation. Kimchi with the addition of various levels(0, 0.5, 1.0, or 1.5%) of pine needle sap was fermented either at $4^{\circ}C$ for 15 days after placing at room temperature for 24 hours(Group A) or at $15^{\circ}C$ for 15 days(Group B). pH reached the optimal value of Kimchi fermentation(pH 4.2) on day 3 and day 4~7 in 0% treatment and pine needle sap treatments, respectively, which indicated that shelf-life of Kimchi was extended by 1~4 days by the addition of pine needle sap. Total acidity was decreased by the addition of pine needle sap. More rapid decrease in pH and increase in total acidity were observed in Group B than in Group A. Reducing sugar content was reduced to approximately 80% by day 4~5 in all treatments. Total vitamin C content was reached peak on day 1 of fermentation and then decreased in all treatments. Reducing sugar and total vitamin C contents were slightly increased by the addition of pine needle sap due to the components present in pine needle sap. Total viable cell number rapidly increased to reach Peak on day 3 and then slowly decreased during the fermentation. However, total viable cell number as well as reducing sugar and total vitamin C contents did not differ between Group A and Group B. In Group A, Lactobacillus cell number in 0% treatment continued to increase to reach peak on day 9, while the numbers in pine needle sap treatments reached Peak on day 5~9 and then gradually decreased throughout the fermentation. Unlike in Group A, Lactobaillus cell numbers in pine needle sap treatments in Group B continued to increase to reach Peak on day 7. As pine needle sap levels increased, total viable cell number and Lactobacillus cell number decreased regardless of fermentation temperatures. The results of this study indicate that pine needle sap causes to delay the Kimchi fermentation by slowing down pH drop and inhibiting the Lactobacillus cell growth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.246-253
• /
• 2010

In this paper, a method of removing the space skew and cross-talk cancellation is proposed where the self-generated signals from the subject are used to obtain the subject's location. In the proposed method, the good spatial sound image is maintained even when the listener moves from the sweet spot. Two major parts of the proposed method are as follows: listener position tracking using the stimuli from the subject and removal of the space skew and cross-talk signals. Listener position tracking is achieved by estimation of the time difference of arrival (TDoA). The position of the listener is then computed using the Talyer-series estimation method. The head-related transfer functions (HRTF) are used to remove the space skew and cross-talk signals, where the direction of the HRTF is given by the one estimated from the listener position tracking. The performance evaluation is carried out on the signals from the 100 subjects that are composed of the 50 female and 50 male subjects. The positioning accuracy is achieved by 70%~90%, under the condition that the mean squared positioning error is less than $0.07m^2$. The subjective listening test is also conducted where the 27 out of the 30 subjects are participated. According to the results, 70% of the subjects indicates that the overall quality of the reproduced sound from the proposed method are improved, regardless of the subject's position.