• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.582-585
• /
• 2016

This study intends to provide initial evacuation distances for the public in case of accidental releases of hydrogen fluoride (HF). HF is a very toxic chemical that is widely used in the chemical, electrical, and electronics industries. Consequence modeling programs, such as ALOHA and PHAST, were used to help formulate a contingency plan in case of an HF leak. For the purpose of this study, the release of entire quantity of HF in 10 min is defined as a worst-case scenario and the release from a partial line rupture is used as an alternative case scenario as National Institute of Chemical Safety (NICS) guidelines. Once the discharge rates were calculated based on the scenarios, the ERPG-2 endpoint distances have been obtained for representative daytime and nighttime weather conditions. This paper presents graphs that can be used to enact swift evacuation orders and emergency response plans in the case of accidental releases of HF.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1565-1570
• /
• 2014

In networking communication, nodes and base station send data to each nodes and destination nodes. In this perspective, it is very important to determine the direction in which data sent to each nodes or destination nodes. Ad-hoc routing protocol is a standard routing protocol that determines how the packets sent to destination. Ad-hoc routing protocol includes protocols such as Ad-hoc On-demand Distance Vector (AODV) and Dynamic Source Routing (DSR). In our efficient proposed protocol based on small end-to-end sequence numbers, route direction can be changed properly with the assistance of helper nodes. In this paper, we focus on the simulation analysis of proposed protocol and comparison with other routing protocol models such as AODV and DSR. We simulated using Network Simulator (NS-2) by parameters such as simulation time, number of nodes and packet size based on our metrics (packet delivery fraction, routing load, data throughput). Our proposed protocol based on small end-to-end sequence numbers shows better performance and superior to other two protocols.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.93-105
• /
• 2008

This study was for the analysis of Kinematic variables, using 3 types of starting block position setting(25cm, 40cm, 35cm). The subjects of the study were 8 short-distance male runners. In the study, the most desirable block setting type for the runner who were average 180cm tall to get the good record was 45cm (distance between the starting line and the front block) and 40cm (distance between the blocks). In conclusion, the most favorable start in 100m race was to get the strongest propelling power at the start line. The most important technical point was quick responding ability to the start signal and reaching the maximum speed at the shortest time through the strong kick using the front leaning body angle and gravity. Type B start method has shown the most effective results for the improvement of the records in the 100m race.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.201-211
• /
• 2023

This study investigated the damage range of the debris flow to predict the amount of collapsed soil in a landslide event. The height of the collapsed slope and the distance traveled by the collapsed soil were used to predict the total trajectory distance using a random walk model. Debris flow trajectory probabilities were calculated through 10,000 Monte Carlo simulations and were used to calculate the damage range as measured from the landslide scar to its toe. Compiled information on debris flows that occurred in the Cheonwangbong area of Mt. Jirisan was used to test the accuracy of the proposed random walk model in estimating the damage range of debris flow. Results of the comparison reveal that the proposed model shows reasonable accuracy in estimating the damage range of debris flow and that using 10 m × 10 m cells allows the damage range to be reproduced with satisfactory precision.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.27 no.1
• /
• pp.67-80
• /
• 2024

In south korea, the elderly population has been continuously increasing, so blind spots in administrative welfare services for the elderly are expected to increase. therefore, this study aimed to analyze the types of blind spots in administrative welfare services for the elderly in gijang-gun, Busan, where the elderly population is increasing. using a network analysis, the demand and service supply ranges were derived. after that, in comparison to their sizes, the blind spots were divided into three types: i) blind spots in service supply, ii) blind spots in mobility constraint, and iii) dual blind spots. As a result, in gijang-gun, the blind spots in mobility constraint were 21.5%, the dual blind spots were 9.5%, and the blind spots in service supply were 3.2%. Based on these results, this study suggested policy directions for resolving the blind spots in administrative welfare services for the elderly by type.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.3
• /
• pp.459-475
• /
• 2008

This study analyzes the network structure of the Metropolitan Seoul subway system by applying complex network analysis methods. For the purpose, we construct the Metropolitan Seoul subway system as a network graph, and then calculate various indices introduced in complex network analysis. Structural characteristics of Metropolitan Seoul subway network are discussed by these indices. In particular, this study determines the shortest paths between nodes based on the weighted distance (physical and time distance) as well as topological network distance, since urban travel movements are more sensitive for them. We introduce an accessibility measurement based on the shortest distance both in terms of physical distance and network distance, and then compare the spatial structure between two. Accessibility levels of the system have been getting up overall, and thus the accessibility gaps have been getting lessen between center located subway stops and remote ones during the last 10 years. Passenger traffic volumes are explored from real passenger transaction databases by utilizing data mining techniques, and mapped by GIS. Clear differences reveal between the spatial patterns of real passenger flows and accessibility. That is, passenger flows of the Metropolitan Seoul subway system are related with population distribution and land use around subway stops as well as the accessibility supported by the subway network.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.6
• /
• pp.25-34
• /
• 2011

Dredged and reclaimed ground in progress at the West Coast has a high content of coarse particles. There will be different behaviors depending on the location of outlet and engineering properties of soil when its ground is dredged by a pump. Therefore, the experiments were conducted that were manufactured about the chamber equipment of length 2,650mm, width 770mm, height 735mm, experimented step filling method and water content about 300%, 500% and 700% respectively with SM and ML samples in order to realize segregating sediment characteristics of dredged ground with changing much fine. With results of analysis, ML sample by higher initial water content was reached to the period of complete sedimentation and coefficient of sedimentation consolidation increased with increases of diffusion distance. SM samples showed behavior of coarse soil with diffusion distance 120cm, diffusion distance of more than 120cm showed a similar tendency with ML sample under the influence of fines. In ML sample, it could be also found that lower depth and the more increasing diffusion distance increase in percentage of sieve #200 but water content decreases. In SM sample, it could be also found that coarse soil was piled at near the diffusion distance zone but fine soil was piled at the far diffusion distance zone and prominent difference showed between percentage of sieve #200 and water content(%) by boundary point 120cm~160cm of both samples. Also, shear strength was expressed ML-maximum 2.97kPa, SM-maximum 10.2kPa with diffusion distance.

• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.245-254
• /
• 2006

Using a natural gradient tracer test, the characteristics of hydrodynamic dispersion according to each depth of a fractured rock were studied, and the effective porosity and longitudinal dispersivity of the fractured rock were estimated. The difference of vertical hydrodynamic dispersion was identified by concentration breakthrough curves linear regression analyses of bromide concentrations according to depths versus time, and hydraulic fracture characteristics at two intervals of the monitoring well. Higher concentration and faster arrival time at GL- 18 m depth (RQD 13%, average joint spacing 2 cm, TCR 100%) than at GL- 25 m depth (RQD 41%, average joint spacing 7 cm, TCR 100%) resulted from shorter distance and more fractures. Tracer was transported through the 1 st fractures until the arrival of its peak concentration and through the 2nd fractures or matrix diffusion after the arrival of its peak concentration. The increase/decrease slopes of bromide concentration versus time were 3.46/-1.57 at GL-18 m depth and 3.l9/-0.47 at GL- 25 m depth of the monitoring well. So the faster bromide transport was confirmed at GL- 18 m depth with more fractures. The concentration increment of bromide was fitted by a Gaussian function and the concentration decrement of bromide was fitted by an exponential function. Effective porosity and longitudinal dispersivity estimated by CATTI code were 10.50% and 0.85 m, respectively.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.11a
• /
• pp.235-238
• /
• 2007

본 논문에서는 기존의 클러스터 기반 퍼지 모델트리에서 트리의 깊이에 따른 over-fitting으로 인한 훈련 및 검증데이터의 일관성 문제점을 해결하기 위해 상호 노드간의 정보를 고려하는 방법을 제안하고자 한다. 제안된 방법은 우선 입력과 출력변수의 속성을 고려한 퍼지 클러스터링에 의해 중심벡터를 계산한 후, 중심벡터들과 입력 속성간의 소속도를 이용하여 구간 분할된 영역별로 각각의 선형모델을 구축한다. 예측 단계에서는 입력된 데이터가 잎노드에 도달하는 노드간의 중심벡터와 입력 데이터간의 거리값에 따른 소속도를 계산한 후 최종적으로 무게 중심법을 이용하여 출력값을 예측하게 된다. 제안된 방법의 우수성을 보이기 위해 다양한 벤치마크 데이터를 대상을 실험한 결과, 기존의 클러스터 기반 퍼지 모델트리보다 향상된 성능을 보임을 알 수 있었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.109-111
• /
• 2006

이동 Ad Hoc 네트워크(MANET)에서 많은 영역에 걸쳐 다양한 라우팅 프로토콜들이 제안되어 왔다. 다중전송률은 현재 많은 무선 랜 카드에 의해 지원되고 있고, 그 효과에 관한 라우팅 프로토콜 알고리즘들이 연구되고 있다. 다중전송률에서의 high-rate을 이용한 데이터 전송은 일정한 시간 내에 더 많은 데이터를 전송할 수 있기 때문에 높은 throughput을 기대 할 수 있다. 그러나 high-rate을 이용한 데이터 전송의 경우 전송이 가능한 거리가 짧아져 목적노드까지 도달하는 데에 더 많은 홉을 거쳐야 한다. 그로 인해 패킷을 전달하는데 걸리는 시간이 늘어나 전교 네트워크의 성능을 저하시킬 수도 있다. 본 논문에서는 노드들의 이동으로 인한 네트워크의 토폴로지 변화나 채널의 상태에 따라 어떤 전송 속도로 데이터를 전송할 것인가를 결정하기 위해 다중전송률을 고려한 위치 정보 기반의 라우팅 프로토콜을 제안한다.