• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.111-114
• /
• 2010

With the rise of green technology, the environmental question causes people’s attention more and more, based on objective of the sustainable development, the green risk has already begun to appear. In the paper the definition of the green risk of construction project is given, it analyzes and identifies the green risk of construction project from three aspects, based on BIM, the relation with green risk was found. Though the relation, the management of green risk was analyzed and we may take some measures to reduce the unnecessary risk and waste.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.42-50
• /
• 2006

역들의 공간적 분포가 불균질하고 역의 크기가 큰 역암의 경우 암석 전체를 대표하는 물성치($E_m,\;c,\;\Phi$ 등) 구하기 위해서는 매우 큰 시험기기가 필요하다. 따라서 커다란 역을 포함하는 역암의 경우 직접 암석실내시험을 통한 물성치 산정은 현실적으로 거의 불가능하다. 이러한 문제를 극복하기 위하여 이 연구에서는 개별요소법을 이용하여 역암의 물성치를 산출하는 방법을 제안한다. 그 방법은다음과 같다. (1) 역암내의 역의 물성과 기질부의 물성을 각각 실내실험을 통하여 파악한 후 이들 (2) 두 물질의 거동양상을 구현할 수 있는 개별요소집합체의 개별요소간의 물성을 결정한다. (3) 역의 함량, 크기 모양 공간적 분포양상등의 역암 조직과 유사한 개별요소 수치해석시료를 만든 후, (4) 이를 수치 해석실험 (이축압축실험)에 사용한다. 이러한 수치해석실험을 통해 현재까지 만들어진 결과는 다음과 같다. 첫째, 역의 강도가 기질의 강도보다 높은 역암의 경우, 역의 양이 증가할수록 일축압축강도, 내부 마찰각, 점착력이 증가하지만 증가 양상은 선형이 아니다. 탄성계수의 경우 역의 양과 상관 없이 변화하지 않는다. 둘째, 역과 기질 사이 표면의 점착력이 약할 경우 이러한 표면에서 최초 미세 균열이 형성되기 시작하므로 이 점착력은 물성치를 산출하는 중요한 인자이다. 따라서, 향후 이에 대한 자세한 연구가 필요하다고 판단된다. 결론적으로,설계 또는 시공시 직접시험에 의한 물성치의 파악이 어려운 역암 또는 직접시험을 위해 대량의 시료를 필요로 하는 함력 미고결지층, 핵석층, 풍화암과 같은 시료의 물성치는 별도로 측정된 물성들 (예, 역과 기질)을 이용한 개별요소법을 통해 구할 수 있다.로 나타났다.TEX>, DIN/DIP비 표층수 $23.91\pm3.42$, 저층수 $23.43\pm3.38$이었으며, 전반적으로 해역별 수질기준 I등급 내지는 II등급을 유지하고 있었고, 공간적으로는 외해측으로 갈수록 외해수와 혼합 확산되어 양호한 수질을 나타내었다. 장기적인 변동특성은 세그룹으로 구분되어진다.기 실험결과 용출용매로 증류수와 해수를 이용했을 때, 제강 슬래그에서 용출되는 납, 구리, 카드뮴, 수은의 용출 경향의 차이를 확인할 수 있었고 이에 따라서, 납, 구리, 카드뮴의 용출 유해성은 낮기 때문에 해양구조물로의 제강슬래그 유효이용은 적합할 것으로 판단되었다.im80%$로 계산되었다. 열형광선량계로 측정된 방사선량은 각각 1.8, 1.2, 0.8, 1.2, 0.8 (70 cm 거리) cGy로 측정되었으며, 환자의 복부 표면에서의 서베이메터를 이용한 측정량은 10.9 mR/h였다. 차폐구조물의 사용 시 전체 치료 동안에 태아선량은 약 1 cGy 정도로 평가되었다. 결론 : AAPM Report No.50의 자료에 따르면, 임산부의 방사선 치료 시 태아의 방사선 피폭선량은 5 cGy 이하일 경우에 방사선 피폭에 따른 태아의 위험이 거의 없는 것으로 제시되고 있다. 본원에서 차폐 구조물을 설치하였을 경우에 측정된 태아선량은 약 1 cGy로 측정되었고, 고안된 차폐구조물은 태아에 도달하는 방사선량을 감소시키기에 적합한 설계임이 입증되었다. 아니라 일반종합병원에서도 CTX-M형 ESBL 생성 E. coli와 K. pneumoniae가 존재하며 확산 중임을 시사한다. 앞으로 CTX-M형 ESBL의 만연과 변종 CTX-M형 ESBL의 출연을 감시하기 위한

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.3 s.13
• /
• pp.65-75
• /
• 2004

A shell structure, having a curvature with a curved surface, is an extremely efficient mechanical creation regard to the external load. A basic structural resistance mechanism is the structural system, which is resisted the out-of-plane direction load by in-plane forces using the structure's curvature. Therefore, it has a merit to make thin and lightweight large spacial structures using minimum materials. Among the large spare structural system, the rapid development of the membrane structures, cable structures and the hybrid structures are watched recently. But, this kind of structural system shows the unstable phenomenon by snap-through or bifurcation according to the shape of structure, and the understanding of the collapse mechanism by this phenomenon is very important to the design process. In this study, I investigated the unstable characteristics of the Geiger-type, Zetlin-type and flower-type hybrid cable dome structures, which is the lightweight hybrid structures using compression and tension elements continuously, according to the difference of structural system.

• Journal of Korea Foresty Energy
• /
• v.24 no.2
• /
• pp.1-9
• /
• 2005

After manufacturing fermentation system for degrading pig manure using environmentally friendly technique, performance of the system and characteristics of wood chips and pig manure fermented in the system were analyzed. Results from this study shows that proper fermentation temperature($55{\sim}60^{\circ}C$) reached 3days after the system started and degradation rate, which expresses fermentation performance of system, was $180{\iota}$/day. Even as progressing the fermentation of wood chips and pig manure mixture, the amount of extractives drawn out by alkali, and alcohol-benzene and lignin content was not varied. However, ash content in wood was increased. The inorganic compounds in pig manure seem to be transferred into wood chip. On the other hand holocellulose contents in wood were decreased a little. Holocellulose seems to be consumed as the second carbon source in fermentation process. Results through analysis of inorganic- and heavy metal elements contents in wood chips and pig manure fermented in long term process shows that inorganic elements($Ca^{2+},\;Mg^{2+},\;K^+,\;Na^+$ etc.) contents were increased with fermentation time and heavy metal elements(Cd, As, Cu etc.) which cause environmental pollution were not detected. Number of microorganisms including bacteria, actinomycetes, and fungi, the number of C.F.U(Colony Forming Unit) was increased while temperature in fermentation system was abruptly increased.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.332-340
• /
• 2015

Acoustic emission (AE) is an effective nondestructive test that uses transient elastic wave generated by the rapid release of energy within a material to detect any further growth or expansion of existing defects. Over the past decades, because of environmental issues, the use of compressed natural gas (CNG) as an alternative fuel for vehicles is increasing because of environmental issues. For this reason, the importance and necessity of detecting defects on a CNG fuel tank has also come to the fore. The conventional AE method used for source location is highly affected by the wave speed on the structure, and this creates problems in inspecting a composite CNG fuel tank. Because the speed and dispersion characteristics of the wave are different according to direction of structure and laminated layers. In this study, both the conventional AE method and the energy based contour map method were used for source location. This new method based on pre-acquired D/B was used for overcoming the limitation of damage localization in a composite CNG fuel tank specimen which consists of a steel liner cylinder overwrapped by GFRP. From the experimental results, it is observed that the damage localization is determined with a small error at all tested points by using the energy based contour map method, while there were a number of mis-locations or large errors at many tested points by using the conventional AE method. Therefore, the energy based contour map method used in this work is more suitable technology for inspecting composite structures.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.20-26
• /
• 2016

The residence time measures the time spent by a water parcel or a pollutant in a given water body. So residence time of water is widely used as an indicator of how a substance will remain in an estuary and it is used to enable comparisons among different water bodies. To estimate residence time of particulate matters from land and aquaculture, EFDC that includes particle tracking model was applied to the Geoje Bay. Modelled average residence time was about 65 days in the inner part. It meant it takes about 2 months for substance from land and aquaculture to be transported to the outside of Geoje Bay. The results indicated that residence time varied spatially throughout Geoje Bay depending on tidal flushing and, in general conditions, tidal flushing exerts the greatest influence to the flushing of Geoje Bay. This reveals relationships between residence times of particulate matters and physical properties of the bay and Geoje Bay is vulnerable to water quality problem.

• Nuclear Engineering and Technology
• /
• v.19 no.1
• /
• pp.22-33
• /
• 1987

The confirmed integrity of nuclear fuel cladding materials is an important object during steady state and transient operations at nuclear power plant. In this context, the clad material yielding behavior is especially important because of pellet-clad gap expansion. During the steep power excursion, the in-pile irradiation behavior differences between uranium-dioxide fuel pellet and zircaloy clad induce the contact pressure between them. If this pressure reaches the zircaloy clad yield pressure, the zircaloy clad will be plastically deformed. After the reactor power resumed to normal state, this plastic permanent expansion of clad tube give rise to the pellet-clad gap expansion. In this paper, the simple mandrel expansion test method which utilizes thermal expansion difference between copper mandrel and zircaloy tube was adopted to simulate this phenomenon. That is, copper mandrel which has approximately three times of thermal expansion coefficient of zircaloy-4 (PWR fuel cladding material) were used in this experiment at the temperature range from 400C to 700C. The measured plastic expansion of zircaloy outer radius and derived mathematical relations give the yield pressure, yield stress of zircaloy-4 clad at the various clad wall temperatures, the activation energy of zircaloy tube yielding, and pellet-clad gap expansion. The obtained results are in good agreement with previous experimental results. The mathematical analysis and simple test method prove to be a reliable and simple technique to assess the yielding behavior and gap expansion measurement between zircaloy-4 tube and uranium-dioxide fuel pellet under biaxial stress conditions.

• Korean Journal of Weed Science
• /
• v.30 no.4
• /
• pp.396-404
• /
• 2010

Phenolic compounds, which are products of secondary metabolism, have been demonstrated to be widespread growth substances in plants. The objectives of this study were to identify the phenolic compounds in common ragweed (Ambrosia artemisiifolia var. elatior) by HPLC and to evaluate their effects on germination and seedling growth of three weed species. Under controlled conditions in Petri dishes at $25^{\circ}C$, $10^{-3}$ and $10^{-4}$ M solutions of phenolic compounds were evaluated in seed germination tests. Four phenolic compounds (caffeic acid, O-coumaric acid, ${\rho}$-coumaric acid and ferulic acid) in common ragweed plant were identified and their concentration was increased from the stage before flowering through full flowering stage. Treatment of O- and ${\rho}$-coumaric acids delayed the seed germination of Digitalia ciliaris, while the treatment of caffeic acid delayed the seed germination of Echinochloa crus-galli. In time to 50% germination ($T_{50}$), phenolic compounds at $10^{-4}$ M promoted in Cyperus microiria and E. crus-galli but the level of $10^{-3}$ M delayed the $T_{50}$ of those weeds. The O-coumaric acid inhibited seed germination and seedling growth of the tested weeds and especially it perfectly inhibited the root growth of E. crus-galli.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.291-300
• /
• 2020

The cartridges used for illuminating a desired point or area are virtually limited in tests and evaluations because of limitations, such as noise during launch, the possibility of fires caused by illuminant charge, and the annual testable quantity. Therefore, to solve these problems, a ground fixed test, which replaces the firing test, or an evaluation method to perform limited tests, can be applied more efficiently. In this paper, the results of an 81mm illuminating cartridge, KM series performed in 2019 were analyzed comprehensively to identify the trends in reliability and quality characteristics and to estimate the shelf life. The shelf life was estimated to be at least 10 years based on the time when the lower confidence level reached 80% at a confidence level of 90%. Considering only major defects, the shelf life can be estimated to be approximately 23 years. On the other hand, the shelf life was estimated to be approximately 11 to 15 years and 25 to 28 years according to the effective illuminating time. Finally, an assessment plan of illuminating cartridges for the mortars was also presented as an improvement plan for an assessment method in the future.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2002.10a
• /
• pp.162-162
• /
• 2002

염소소독 결과 수돗물 중에 존재하는 Dichloroacetic acid(DCAA)와 Trichloroacetic acid(TCAA)는 동물실험 결과 발암성 등 악영향을 일으키는 것으로 알려져 있다. 이러한 화합물들은 수돗물을 사용할 때 열을 가하면 그 농도가 변하게 된다. 이 연구에서는 설문조사를 통해 개인이 하루 동안에 섭취하는 수돗물의 양과 섭취패턴을 조사하고, 각 가정마다 수돗물의 농도를 측정하여 DCAA 및 TCAA에 대한 경구섭취 노출량을 평가하고자 실시하였다. 춘천에 위치하고 있는 60가정을 2002년 1월부터 2월 사이와 7월부터 8월 사이에 방문하여 수돗물을 채취하고, 주부를 대상으로 24시간 동안의 물 사용에 대한 설문을 실시하였으며, 아침 첫 소변을 회수하였다. 수돗물 및 소변 중 DCAA 및 TCAA에 대한 분석은 methyl ester 형태의 유도체를 만든 후 GC/PDECD로 분석하였다. 수돗물을 가열하면 DCAA의 농도는 증가하고, TCAA의 농도는 감소하였고, DCAA 및 TCAA의 경구 섭취량은 수돗물 중의 농도에 섭취부피와 가열시간에 따른 농도변화율을 곱하여 산출하였다. 실험 대상자들의 평균 수돗물 섭취부피는 1.7$\ell$이었고, 평균 가열시간은 10~15분이었다. 추정한 DCAA의 섭취량은 찬 수돗물만을 마시는 것을 가정한 것에 비해 182% 높았고, TCAA에 대해서는 30% 낮았다 이와 같은 결과는 우리나라 사람들의 식생활이 국이나 찌개 및 보리차 등과 같이 가열한 음식이나 음용수를 많이 섭취하기 때문이다. 그러므로 음용수 중 DCAA 및 TCAA의 인체 섭취 노출평가를 하기 위해서는 섭취한 부피뿐만 아니라 가열에 따른 농도 변화도 동시에 고려하여 야 한다.배 센타의 재고 완충역할을 수행하게 한다. 이에 따라 안전 재고 및 역 배송을 최소화 할 수 있을 뿐 아니라 미 출고로 인한 손실을 최소화하며 고객의 서비스를 일정하게 유지시킬 수 있을 것으로 기대된다.증진, 페기물 발생 억제 분야에 상당한 성공을 거두었으며, 지금도 지속적으로 유지 관리 및 미비한 부분(CAER, 등)의 향상에 노력하고 있다. Dow Korea의 수입 판매 부분에 주로 관련된 Product Stewardship 및 Distribution Code는 여러 사업부 및 여러 지역(미국, 유럽, 아시아 등)에 위치한 담당자가 관련된 까닭에 가장 복잡한 부분이어서 많은 인력과 시간을 소비하면서 노력하고 있으나 아직까지 소정의 목표에 도달하지 못했으며, 2000년 말에 모든 실행지침이 실행되도록 목표, 실행 계획 및 조직을 수정하여 노력하고 있다.lumn density at distant position from MD5 is larger than that in the (:entral region. We have deduced that this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\