Journal of the Korea Institute of Information Security & Cryptology
/
v.34
no.2
/
pp.289-299
/
2024
Blockchains are not efficient for real-time processing because the growing number of transactions and users delays many computations and network communications. This study proposes a cloud proxy server, so that legitimate users can use blockchain as well as reduce network latency. To proceed with a blockchain transaction, the blockchain copy server verifies all transaction-related data, but the cloud proxy server verifies legitimate users with a simple zero-knowledge proof algorithm, enabling efficient blockchain real-time processing. The cloud proxy server can support blockchain anonymity, security, and scalability that can verify legitimate users with the proposed zero-knowledge proof by receiving the registered key pair of the blockchain user. In the proposed research analysis, blockchain-based cloud proxy server reduces network latency compared to previous studies and key processing on cloud proxy servers reduces the cost of key computation compared to previous studies.
Processor technology is currently continued to parallel processing techniques, not by only increasing clock frequency of a single processor due to the high technology cost and power consumption. In this paper, a SIMD (Single Instruction Multiple Data) based parallel processor is introduced that efficiently processes massive data inherent in multimedia. In addition, this paper proposes pixel subword parallel processing instructions for the SIMD parallel processor architecture that efficiently operate on the image and video pixels. The proposed pixel subword parallel processing instructions store and process four 8-bit pixels on the partitioned four 12-bit registers in a 48-bit datapath architecture. This solves the overflow problem inherent in existing multimedia extensions and reduces the use of many packing/unpacking instructions. Experimental results using the same SIMD-based parallel processor architecture indicate that the proposed pixel subword parallel processing instructions achieve a speedup of $2.3{\times}$ over the baseline SIMD array performance. This is in contrast to MMX-type instructions (a representative Intel multimedia extension), which achieve a speedup of only $1.4{\times}$ over the same baseline SIMD array performance. In addition, the proposed instructions achieve $2.5{\times}$ better energy efficiency than the baseline program, while MMX-type instructions achieve only $1.8{\times}$ better energy efficiency than the baseline program.
Purpose The atmosphere of respect for individual tastes that have spread throughout society has changed the consumption trend. As a result, the travel industry is also seeing customized travel as a new trend that reflects consumers' personal tastes. In particular, there is a growing interest in 'film-induced tourism', one of the areas of travel industry. We hope to satisfy the individual's motivation for traveling while watching movies with customized travel proposals, which we expect to be a catalyst for the continued development of the 'film-induced tourism industry'. Design/methodology/approach In this study, we implemented a methodology through 'OCR' of extracting and suggesting film location information that viewers want to visit. First, we extract a scene from a movie selected by a user by using 'OpenCV', a real-time image processing library. In addition, we detected the location of characters in the scene image by using 'EAST model', a deep learning-based text area detection model. The detected images are preprocessed by using 'OpenCV built-in function' to increase recognition accuracy. Finally, after converting characters in images into recognizable text using 'Tesseract', an optical character recognition engine, the 'Google Map API' returns actual location information. Significance This research is significant in that it provides personalized tourism content using fourth industrial technology, in addition to existing film tourism. This could be used in the development of film-induced tourism packages with travel agencies in the future. It also implies the possibility of being used for inflow from abroad as well as to abroad.
개념적으로 존재하던 클라우드 컴퓨팅의 사용이 본격적으로 심화되면서 기업들의 클라우드 컴퓨팅에 대한 개념과 생각에도 많은 변화가 생기게 되었다. 클라우드 컴퓨팅 구축이 더욱 가속화되는 가운데, 그로 인한 비용절감이나 투자수익 창출 효과에 대한 검증이 활발해질 것으로 예측됐다. 시대를 뒤바꾸는 혁신적인 기술도 잇달아 등장할 것이란 기대도 높다. 2013년은 클라우드 컴퓨팅의 발전에 또 한번의 변곡점이 될 것으로 전망된다. 본 고에서는 2013년 클라우드 컴퓨팅에 관한 예측 몇 가지를 살펴보고자 한다. 첫째, 중소기업에서의 클라우드 컴퓨팅 사용 및 정착이 가속화될 것으로 보인다. 대기업의 경우에는 기존에 구축되어 있는 IT 시스템에 대한 거버넌스 체계를 완성해 나가고 있는 상황 속에서 중앙집중형과 사용자 편의성이 강화된 클라우드 컴퓨팅을 도입하기 위해서는 아직 추구 해야 할 과제가 많다. 하지만 중소기업은 예산을 문제로 대기업과 같은 수준의 IT 인프라를 갖추지 못하고 있기 때문에 클라우드 컴퓨팅 도입으로 비용대비 고효율의 IT 인프라를 갖출 수 있다. 둘째, CSP, CSB와 통합허브가 성장할 것이다. 플랫폼 전쟁이 시장 점유율 '횡령' 싸움임을 CSP들이 깨닫게 됨에 따라 이러한 가격 경쟁들은 더 잦아질 것으로 전망된다. 그리고 2013년 클라우드 벤더들은 클라우드 가격 책정이 비용-수익 관리(costyield management)의 연장선에 있음도 알게 될 것이다. 핵심은 효율적 설계와 저비용 운영, 그리고 무엇보다 높은 사용률에 있다. 또한 기업들이 점점 많은 애플리케이션을 소프트웨어 형태로 구매하고 있기 때문에 애플리케이션 자체를 통합하는 문제, 애플리케이션에 대한 보안과 감사 프로세스개발 등의 문제가 제기되고 있다. 시스템 통합 서비스와 통합 허브는 이런 문제를 해결하기 위해 노력하게 될 것이다 셋째, 2013년은 하이브리드 클라우드 컴퓨팅이 급부상할 것으로 전망된다. 앞으로는 클라우드 컴퓨팅 시장에서 공급업체끼리 경쟁하는 것은 의미가 없으며 기업들은 절대 한 가지 클라우드 기술이나 공급자에 안주하지 않을 것이다. 이것은 곧 2013년에는 하이브리드 및 이종 클라우드 컴퓨팅이 각광 받을 것을 의미한다. 이러한 하이브리드 클라우드 컴퓨팅을 도입하기 위해서는 클라우드 컴퓨팅의 단점과 문제 해결을 위해 하나의 목적을 가지고 다양한 산업체들이 모여 경쟁업체이면서도 협력관계를 이루는 것이 중요하다. 넷째, 멀티 디바이스를 이용한 클라우드 사용이 폭발적으로 증가될 것으로 보인다. 1인당 여러 대의 단말 보유, 이동성 향상 요구, 4G 확산 등 모바일 시장을 중심으로 한 환경 변화로 인해 이전보다 한층 진화된 클라우드 기반의 서비스가 다양하게 등장할 것으로 예상된다. 또한 4G 시대가 본격적으로 개막되면서 데이터 및 앱을 저장하는 것뿐만 아니라 앱을 실행하는 프로세싱까지도 모두 인터넷 상의 서버에서 이루어지는 방식인 클라우드 스트리밍(Cloud Streaming)이라는 신기술이 상용화될 것으로 기대된다. 다섯째, 2013년에는 'XaaS(Everything as a Service)' 개념이 보다 확장될 것이다. 클라우드 컴퓨팅의 사용이 확산됨에 따라 하드웨어의 도입, 소프트웨어 및 데이터베이스 개발과 구축, IT 서비스 등 IT 인프라 스트럭처의 토대에 많은 변화가 생겼다. 인프라스트럭처는 더 이상 고정불변의 자산으로서가 아니라 유연성과 확장성을 강조하는 서비스로서의 특징으로 점점 부각되고 있다. 따라서 모든 IT 인프라스트럭처가 Ondemand화 서비스로 제공되는 비즈니스 모델들이 부상하고 있으며 플랫폼, 하드웨어 데이터베이스 등 모든 IT 요소를 서비스 형태로 제공하는 XaaS가 2013년 새로운 개념으로 떠오를 것으로 기대된다. 여섯번째로 스토리지를 둘러싼 가격 경쟁이 더욱 심화될 것으로 보인다. 업체들의 가격 인하는 앞으로도 계속될 것이며 사용자들에게도 큰 혜택으로 돌아갈 것이지만 사람들은 가격만으로 서비스를 선택하지 않을 것이기 때문에 가격보다는 차별화된 기능 및 서비스 전략이 필요할 것이다.
Journal of the Korea Society of Computer and Information
/
v.17
no.1
/
pp.1-10
/
2012
Improving operating frequency of processors is no longer today's issues; a multiprocessor technique which integrates many processors has received increasing attention. Currently, high-performance processors that integrate 64 or 128 cores are developing for large data processing over 2, 4, or 8 processor cores. This paper proposes an optimal many-core processor for synthesizing guitar sounds. Unlike the previous research in which a processing element (PE) was assigned to support one of guitar strings, this paper evaluates the impacts of mapping different numbers of PEs to one guitar string in terms of performance and both area and energy efficiencies using architectural and workload simulations. Experimental results show that the maximum area energy efficiencies were achieved at PEs=24 and 96, respectively, for synthesizing guitar sounds with sampling rate of 44.1kHz and 16-bit quantization. The synthesized sounds were very similar to original guitar sounds in their spectra. In addition, the proposed many-core processor was 1,235 and 22 times better than TI TMS320C6416 in area and energy efficiencies, respectively.
This study proposes an Architecture for user level End-to-end Quality of Service(QoS) using overlay In Next Generation Network(NGN). Inexisting NGNs, the IMS of a control plane provides user QoS through direct traffic control and resource-reservation over the IP packet transport network of a user plane. Further, a set of torrent studies are ongoing not only to maximize the QoS for users, but also to minimize the quality deterioration for supporting the user End-to-end QoS. Along with that, an extended QoS in user level must be considered, for Instance, differentiating service quality to support users' expectation, providing optimized contents by users' equipments, and so forth. Accordingly, the Overlay Service Network Architecture proposed by this study provides protocol adaptation for maximum throughput on transport layer by using the most efficient transport layer protocol to various network circumstances. Also, the Overlay Service Network Architecture on application layer distributes processing delay from the data transformation process of the user equipment to the network, and it is capable of intermediate processing depending on user service level. application service feature, and equipment circumstance as well. Thus, this study mainly proposes the Overlay Service Network Architecture for user level end-to-end QoS in NGN with the quality control features both on the transport layer and the application layer, an internal component feature, and a service scenario providing the QoS linking with 3GPP.
With increasing multicore system, much effort has been put on the performance improvement of its application. Because multicore system has multiple processing devices in one system, its processing power increases compared to the single core system. However in many cases the advantages of multicore can not be exploited fully because the existing software and hardware were designed to be suitable for single core. When the existing software runs on multicore, its performance improvement is limited by the bottleneck of sharing resources and the inefficient use of cache memory on multicore. Therefore, according as the number of core increases, it doesn't show performance improvement and shows performance drop in the worst case. In this paper we propose a method of performance improvement of multicore system by applying Flow-Level Parallelism to the existing TCP/IP network application and operating system. The proposed method sets up the execution environment so that each core unit operates independently as much as possible in network application, TCP/IP stack on operating system, device driver, and network interface. Moreover it distributes network traffics to each core unit through L2 switch. The proposed method allows to minimize the sharing of application data, data structure, socket, device driver, and network interface between each core. Also it allows to minimize the competition among cores to take resources and increase the hit ratio of cache. We implemented the proposed methods with 8 core system and performed experiment. Experimental results show that network access speed and bandwidth increase linearly according to the number of core.
Park, Sang-Mo;Kim, Seong-Kyun;Park, Ji-Man;Kim, Jang-Hyun;Jeon, Yoon-Tae;Koak, Jai-Young
Journal of Dental Rehabilitation and Applied Science
/
v.33
no.4
/
pp.260-268
/
2017
Purpose: Manufacturing with AM (Additive manufacturing) technique has many advantages; but, due to insufficient study in the area, it is not being widely used in the general clinic. In this study, differences of flexural strength among various materials of 3 unit fixed dental prosthesis were analyzed. Materials and Methods: A metal jig for specimens that had a 3-unit-fixed dental prosthesis figure were fabricated. The jigs were made appropriately to the specifications of the specimens. Three different kinds of materials of specimens which were NC (mathacrylic esther based), DP-1 (Bisphenol A epoxy acrylate type oligomer based), and DT-1 (urethane acrylate based) were printed with DLP machine. Five specimens for each kind of material were printed with an angle of $30^{\circ}$ from the horizontal surface. The specimens were placed on the jig and the flexural strength was measured and recorded using Universal testing machine. The recorded data was analyzed in SPSS using One-way ANOVA and Tukey HSD to determine the significance of the differences of flexural strength among the groups. Results: The flexural strengths of each group were the followings: NC, $1119{\pm}305$ N; DP-1, $619{\pm}150$ N; DT-1, $413{\pm}65N$. Using One-way ANOVA and Tukey Honestly Significant Difference test, significant difference was found between NC and the other groups (P < 0.05), but there was no significant difference between DP-1 and DT-1 (P > 0.05). Conclusion: Higher flexural strength was shown in 3-unit-fixed dental prosthesis that were 3D printed using a DLP machine with NC material.
Choe, Eunyoung;Jung, Kyung Mi;Yoon, Jong-Su;Jang, Jong Hee;Kim, Mi-Jung;Lee, Ho Joong
Korean Journal of Remote Sensing
/
v.37
no.3
/
pp.419-430
/
2021
Remote sensing techniques using drone-based multispectral image were studied for fast and two-dimensional monitoring of algal blooms in the river. Drone is anticipated to be useful for algal bloom monitoring because of easy access to the field, high spatial resolution, and lowering atmospheric light scattering. In addition, application of multispectral sensors could make image processing and analysis procedures simple, fast, and standardized. Spectral indices derived from the active spectrum of photosynthetic pigments in terrestrial plants and phytoplankton were tested for estimating chlorophyll-a concentrations (Chl-a conc.) from drone-based multispectral image. Spectral indices containing the red-edge band showed high relationships with Chl-a conc. and especially, 3-band model (3BM) and normalized difference chlorophyll index (NDCI) were performed well (R2=0.86, RMSE=7.5). NDCI uses just two spectral bands, red and red-edge, and provides normalized values, so that data processing becomes simple and rapid. The 3BM which was tuned for accurate prediction of Chl-a conc. in productive water bodies adopts originally two spectral bands in the red-edge range, 720 and 760 nm, but here, the near-infrared band replaced the longer red-edge band because the multispectral sensor in this study had only one shorter red-edge band. This index is expected to predict more accurately Chl-a conc. using the sensor specialized with the red-edge range.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.