• Information and Communications Magazine
• /
• v.25 no.5
• /
• pp.30-37
• /
• 2008

릴레이(Relay station)는 이동통신 시스템에서 음영 지역 해소를 위해 도입된 기술로서 현재 널리 사용되고 있다. 과거의 방식이 단순히 신호를 증폭해서 보내는 리피터(Repeater)의 기능에 국한된 것에 비해 최근에는 보다 지능화된 형태로 발전하고 있다. 더 나아가 릴레이 기술은 차세대 이동통신 시스템에서 기지국 증설 비용과 백홀 통신망의 유지비용을 줄이는 동시에 서비스 커버리지 확대와 데이터처리율 향상을 위해 반드시 필요한 기술로 평가받고 있다. 이에 본 고에서는 릴레이 기술의 일반적인 분류와 도입 시나리오 및 요소 기술에 대해 살펴보고 표준화가 진행 중인 IEEE 802.16j Relay TG (Task group)의 동향 그리고 무선 인지 환경하에서의 릴레이 도입의 가능성에 대해 기술한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.280-282
• /
• 2001

인터넷 상거래의 폭발적 증가로 인터넷에서는 전자 카탈로그에 대한 관심이 증폭되고 있다. 그러나 현존하는 사이트는 주로 2차원 서비스만을 제공한다. 따라서 사용자에게 직관적이고 현실에 가까운 정보를 제공하기 위한 3차원 서비스가 요구된다. 이러한 3차원 멀티미디어 컨텐츠 표현 언어로는 VRML이 대표적이나 기존의 VRML 저작도구는 전자 상거래에서 사용되는 전자 카탈로그를 제작하는 기능을 지원하지 않는다. 본 논문에서는 구현한 VRML을 이용한 3차원 전자 카탈로그 저작도구는 상품을 나타내는 VRML과 데이터 베이스를 연동하여 사용자에게 직관적이고 현실적인 상품이미지와 상세한 상품 정보를 제공한다.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.11
• /
• pp.21-33
• /
• 2020

Ground response analysis has been conducted for each borehole data in Pohang area, using 1D equivalent linear method program, to investigate the applicability of amplification factor to estimate peak ground acceleration. Earthquake motions for ground response analysis were prepared by matching response spectrums for return period of 500, 1000, and 2400 years suggested by seismic design code (MOIS, 2017). Ground survey data were acquired from Geotechnical Information DB System. It has been confirmed that response spectrum obtained from ground response analysis showed good agreement with those from seismic design code irrespective of ground classification. However, PGA (Peak Ground Accelerations) of ground response analysis did not coincide with PGA calculated using amplification factor suggested by seismic design code.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.11
• /
• pp.1055-1065
• /
• 2009

In this study, stability analysis of boundary layers on airfoils is performed by using parabolized stability equations(PSE). Boundary layer edge conditions are obtained by compressible inviscid flow calculations. Mean velocity and temperature profiles of the laminar boundary layer are obtained by solving compressible boundary layer equations in generalized curvilinear coordinates with fourth order accuracy in the wall normal direction. Laminar mean flow profiles are used as input data for PSE to investigate growth rates of disturbances and stability characteristics. For the cases of boundary layer on NACA0012 and HSNLF(1)-0213 airfoils at Mach number 0.5, growth rates with respect to disturbance frequencies and profiles of disturbance amplitude are investigated. The effect of angle of attack on stability characteristics are examined at both upper and lower surfaces. The neutral stability curves, effect of Mach number and effect of airfoil section shapes are also analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1042-1047
• /
• 1999

In this paper, two kinds of digital predistorters are proposed and their performances are analyzed in order to minimize ACI and SNR degradation caused by nonlinearly amplified TC-16QAM signal and to transmit high speed data in power and bandwidth limited land mobile satellite channel. Our simulation results show that LUT predistorter reduces the out-of-band ACI more efficiently as compared to intersymbol interpolated predistorter. Regarding the reduction of in-band SNR and total power intersymbol interpolated predistorter outperforms LUT predistorter. In the simulation mobile satellite channel and nonlinear HPA are modeled by Rician channel and Fujitsu SSPA, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.945-952
• /
• 2015

Power amplification device which is matched to $50{\Omega}$ in order to achieve a high efficiency of a power amplifier using a GaN power amplification device, since there is a limit of application frequency bands, output power, efficiency characteristics selection, in this study based on the measurement data through the source/load-pull test, high output power and to extract quantitative input and output impedance that matches the design objectives of high output power, high efficiency, an implementation of the high efficiency power amplifier. Implemented power amplifier is shows 25watt(44dBm), PAE of 66-76% characteristics in the frequency band of 2.7-3.1 GHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1130-1133
• /
• 2008

In this paper, a mini-Electrocardiograph(ECG) system operated by a general 9V alkaline battery is designed and implemented. The manufactured ECG consists of the instrumentation amplifier stage for detecting and amplifying the heart signal, the high pass filter(HPF), the low pass filter(LPF), the differentiator cirduit, and the peak detector. The detected heart signal through three leads is displayed cleanly on the oscilloscope, which shows the good operation of our ECG. As the detected heart signal is digitalized and displayed on the small LCD unit, the convenience of easy checkup and portability of the implemented ECG can be largely improved. Therefore, whenever and wherever anyone may checkup his/her cardiac state with ease.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.920-927
• /
• 1994

A development of an efficient 14.0~14.5GHz 3 Watt SSPA is described in this paper, which is applicable to the very small aperture terminal(VSAT) for bidirectional data and voice signal transmission in low cost and with small size. The SSPA consists of two stages of low noise amplifiers using the low noise GaAs FETs. two stages of medium power amplifiers using the medium power GaAs FETs, and three stages of power amplifiers including a balanced amplifier using an internally matched power GaAs FET. The achieved with this seven stage amplifiers are 42dB signal power gain, 7dB noise figure, 35dBm output power at 1dB gain compression point and 2.0 and 1.5 input and output VSWR respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.202-202
• /
• 2021

최근 국내·외에서는 산지에서 발생하는 토사재해를 관리하기 위하여 유사이송해석에 필수적인 요소인 소류사량 추정 방안에 대한 연구가 활발히 진행되고 있다. 음향센서가 내장되어 있는 파이프 하이드로폰은 소류사 입자가 충돌 또는 통과하면서 발생하는 음향을 계측하여 소류사량을 간접적으로 계측하는 방법이다. 하이드로폰에 계측된 음향신호는 신호의 정점을 연결한 포락선 신호로 변환되며, 증폭기에 의해 다양한 배율의 신호로 증폭된다. 이렇게 증폭되어진 여러 배율의 신호와 원시신호는 데이터로거에 의해 지속적으로 기록되고, 가공처리하며 검출된 음향 펄스 수와 특정 시간간격의 음압적분치를 이용하여 소류사량을 추정하게 된다. 본 연구에서는 하이드로폰에 계측되는 소류사의 충돌음으로부터 정량적인 소류사량을 추정하기 위한 실험적 연구를 수행하였다. 단일 입경 6종류와 유속 3종류 및 소류사량 5단계로 변화를 주었으며 디노이징 필터를 통해 원시신호의 노이즈를 제거함으로써, 소류사량 추정률의 성능을 높이고자 하였다. 원시신호와 디노이징 음향신호를 비교·분석한 결과 제안된 방법이 기존 원시신호 보다 높은 소류사량 추정률을 보이는 것으로 나타났으며, 단일 입경 연속공급실험을 수행하여 소류사량 추정 가능성을 확인하였다. 향후 혼합 입경 소류사량 추정 실험 및 다양한 입경을 활용한다면 높은 소류사량 추정률을 얻을 것으로 기대된다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.15-20
• /
• 2016

Write amplification is a critical factor that limits the stable performance of flash-based storage systems. To reduce write amplification, this paper presents a new technique that cooperatively manages data in flash storage and nonvolatile memory (NVM). Our scheme basically considers NVM as the cache of flash storage, but allows the original data in flash storage to be invalidated if there is a cached copy in NVM, which can temporarily serve as the original data. This scheme eliminates the copy-out operation for a substantial number of cached data, thereby enhancing garbage collection efficiency. Experimental results show that the proposed scheme reduces the copy-out overhead of garbage collection by 51.4% and decreases the standard deviation of response time by 35.4% on average.