• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.191-198
• /
• 2007

A mobile ad-hoc network (MANET) is an autonomous, infrastructure-less system that consists of mobile nodes. In MANET, on demand routing protocols are usually used because network topology changes frequently. AODV, which is a representative on demand routing protocol, operates using the routing table of each node that includes next hop of a route for forwarding packets. It maintains the established route if there is not an expiration of route or any link break. In the paper, we propose a partially adaptive route maintenance scheme (AODV-PA) based on AODV, which provides dynamic route modification of initial route for selecting the effective route using not only next hop but also next-hop of next-hop (i.e. 2-hop next node) acquired through route discovery process. In addition, the proposed scheme additionally manages the routing table for preventing exceptional link breaks by route modification using HELLO messages. We use NS 2 for the computer simulation and validate that the proposed scheme is better than general AODV in terms of packet delivery ratio, latency, routing overhead.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.465-470
• /
• 2010

In this paper we propose a method which can be used to enhance the reliability of E-ODMRP (Enhanced On-Demand Multicast Routing Protocol). E-ODMRP has low overhead compared to its predecessors since it performs periodic refresh at a rate dynamically adapted to the nodes' mobility and adopts the local recovery. Upon detecting a broken route, a node performs a local search to graft to the forwarding mesh proactively. However in E-ODMRP there is no packet recovery mechanism. A receiver may lose some packets when it is detached from the multicast tree. We propose a simple packet recovery mechanism that can be incorporated into E-ODMRP for enhanced reliability. We show via simulation that our mechanism effectively enhances the reliability of E-ODMRP.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.5
• /
• pp.155-162
• /
• 2014

We proposed a 2 level tree based cluster based routing protocol for mobile ad hoc networks. it is our crucial goal to establish improved clustering's structure in order to extend average node life-time and elevate the average packet delivery ratio. Because of insufficient wireless resources and energy, the method to form and manage clusters is useful for increasing network stability. but cluster-head fulfills roles as a host and a router in clustering protocol of Ad hoc networks environment. Therefore energy exhaustion of cluster-head causes communication interruption phenomenon. Effective management of cluster-head is key-point which determines the entire network performance. The scheme focuses on improving the performance the life time of the network and throughput through the management of cluster-heads and its neighbor nodes. In simulation, we demonstrated that it would obtain averagely better 17% performance than LS2RP.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2267-2273
• /
• 2016

In this paper, WiMedia Distributed-MAC protocol is adopted for development of an OSMU (One Source Multi Use) N-screen wireless multicast service. But, when considering wireless communication environment where channel error rate is time-variant, N-screen high-speed data is vulnerable to be lost. For this problem, a multicast relay scheme is proposed by analyzing Distributed-MAC protocol. In proposed multicast relay scheme, Multicast-free DRP Availability IE is combined and the relay node suitable for N-screen multicast transmissions is selected. Through this operation, it can avoid wireless channel with high errors and can transmit N-screen high-speed data. In simulation results, the proposed multicast relay scheme is compared with conventional Distributed-MAC multicast scheme in view points of throughput and energy consumption according to various numbers of multicast nodes and BER (Bit Error Rate) values in wireless channel. Through simulation results, it is explained that proposed multicast relay scheme should be adopted in WiMedia Distributed-MAC protocol to realize OSMU N-screen wireless multicast services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1A
• /
• pp.1-10
• /
• 2006

The Home Phoneline Networking Alliance(HomePNA) 2.0 technology can establish a home network using existing in-home phone lines, which provides a channel rate of 4-32 Mbps. HomePNA 2.0 Medium Access Control(MAC) protocol adopts an IEEE 802.3 Carrier Sense Multiple Access with Collision Detection(CSMA/CD) access method, Quality of Service(QoS) algorithm, and Distributed Fair Priority Queuing(DFPQ) collision resolution algorithm. In this paper, we describe some performance analysis results of HomePNA 2.0 MAC protocol and the requirements of HomePNA 2.0 MAC controller. Then, we propose the architecture of HomePNA 2.0 MAC controller circuit, show the simulation result of each block included in HomePNA 2.0 MAC controller, and present the HomePNA 2.0 transceiver chip that we have implemented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.707-721
• /
• 2005

Recently, there has been a dramatic increase in data traffic, driven primarily by the explosive growth of the Internet. Optical networking is believed as a key solution to keep up with the growth, thus, the most pressing issue is how to manage and control large optical networks. Currently, provisioning end-to-end connections across the transport network has involved the network operator, leading to long provisioning times in an era when customers are demanding shorter provisioning time. To address this critical issue, new control intelligence is being studied for use within optical networks to shorten provisioning time. Both the IETF and the ITU-T have been aggressively defining many aspects of a control plane for the next generation convergence transport network. Basically, they are based on the distributed control scheme. In this Paper, we suey the applicability of the centralized control scheme for the provisioning control of optical transport network to utilize its inherent advantages over the distributed control scheme. We discuss new central control architecture, and control procedure. Also, we examine the applicability of the existing IETF routing and signaling protocols to the new control concepts, and then, we propose the additional routing and signaling information elements.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.17-24
• /
• 2011

In this paper, we propose an Entropy-based Routing Protocol using Mobility (ERPM) for supporting ubiquitous convergence services efficiently in mobile ad-hoc wireless networks. The main features that the ERPM introduces to obtain the goals can be summarized as follows. First, ERPM can construct stable routing routes based on the entropy concepts using mobility of nodes. Second, ERPM can quantitatively evaluate the stability of route by entropy concepts using mobility of nodes. Third, ERPM can select the most stable route in the view points of mobility of routes between a source node and a destination node, where multiple paths are available. The performance evaluation of the proposed ERPM performed via simulation using OPNET and analysis shows that the ERPM can support the construction of stable routing routes and increase the transmission ratio of data efficiently.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.124-131
• /
• 2014

This paper describes a design of an adaptive baseband modem based on TDMA(time division multiple access) with a relay protocol function for wireless personal area networks. The designed baseband modem is controlled by a master synchronization signal and can be configured a relay network up to 14 hops. For efficient data relay communications, the internal buffer design is optimized by implementing a priority memory bus controller to a single port memory. And the priority memory bus controller is also designed to minimize the number of synthesized logic gates. To implement the synchronization function of the narrowband TDMA relay communication, the number of gates has been reduced by dividing the frame synchronization circuits and the network slot synchronization circuits. By using these methods, the number of gates are used about 37%(34,000 gates) on Xilinx FPGA XC6SLX9 which has 90,000 gates. For the 1024-bit frame size with a 32-bit synchronization word, the communication reception rate is 96.4%. The measured maximum transmission delay of the designed baseband modem is 230.4 msec for the 14-hop relay communication.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.191-196
• /
• 2012

The tactical training system that was applied to wire at open terrain and field is no training accomplishment in conformity with battlefield situation portrayal. Therefore, this paper developed the tactical training and evaluation system for growing fruitfully that is installed as a tactical training monitoring system by USN WMN through controlled sensing interlock for collecting sensing data and guaranteed training equipment status and report training result for serviceability of manager. additionally we implemented controller for managing server of sending and manipulating of being gathered training data by sensor using USN and system as GUI methods. This system is easy for adapting new and improved protocol in order to processing many function of H/W and algorithms which is generated by controlled system is applicable easily.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.129-132
• /
• 2003

In this paper, which sees the Strong-ARM SA1110 it used the main CPU and RTP in VoIP system. It will be able to apply the information communication field it embodied. It used the Tynux_box2 with the hardware side and it composed a VOIP system. And it used the RTP which is a real-time protocol in software control portion. The development environment of the paper that used the Target board and a Linux PC for connection used the RS-232C, USB connection, Ethernet LAN. The VoIP the environment for a communication used the wave file in the substitution which changes analog signal with the digital signal. And For the communication of the both sides it used the socket. This paper explained the fact that against a general technique from the operation of VoIP system. Using the Embedded linux development board which explained an operational process of the RTP protocol.