• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.974-977
• /
• 2003

In this paper, the system that can be controlled in remote site by wireless data and video transceiver is represented. This system has functions and equipments such as video capturing and processing by CCTV camera, auto tracking for object, wireless video and data transceiver, Internet network.

• Information and Communications Magazine
• /
• v.32 no.11
• /
• pp.65-76
• /
• 2015

본 논문에서는 5G 이동통신에 적용하기 위한 동일대역 전이중방식 송수신기의 자기간섭제거 기술 동향에 대하여 분석하였다. 전이중방식 송수신기는 기존의 반이중방식 송수신시스템에 비하여 스펙트럼 효율성이 높고, 고속, 고용량의 데이터처리를 제공할 수 있기 때문에 5G 이동통신에서 사용될 송수신기 기술로 연구되고 있다. 전이중방식 송수신기에서 가장 문제가 되는 것은 동일주파수에서 송신과 수신이 이루어지면서 발생하는 자기간섭이며, 이를 해결하기 위한 자기간섭 격리 또는 제거기술이 안테나 및 채널, 아날로그 RF, 디지털 영역으로 구분되어 연구되고 있으며, 최근에는 시스템 측면에서 통신시스템의 성능을 확보하기 위한 연구가 다양하게 이루어지고 있다. 본 논문에서는 자기간섭제거기술의 정의 및 종류, 초기연구동향 그리고 최근 연구동향을 시스템측면과 요소기술측면에서 파악하여 전이중방식 송수신기를 위한 기본 연구를 통해 효율적인 설계를 위한 접근방법을 제시하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.705-708
• /
• 2010

Recently, HSRC (Half-Symbol-Rate-Carrier) OQPSK (Offset Quadrature Phase Shift Keying) signaling which reduces the bandwidth of transmitted signal for high-speed data communications has been introduced. Since the signal is based on QPSK modulation, it also has the characteristics of QPSK signal. This paper introduces architectures of the transceiver using differential coding to resolve the 4-phase ambiguity problem of the HSRC-QOPSK signaling for high-speed data communications. In addition, this paper proves the functionality of the transceiver with differential coding and shows the BER (bit-error-rate) performance of the transceiver by simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.978-984
• /
• 2015

In this paper, we designed a RF transceiver operating up to 200 km operating range and 45 Mbps data rate. The RF transceiver operates in Ku band and composed of up/down converter, high power amplifier, front-end elements. To satisfy the operating range of RF transceiver, 10W power amplifier was required and realized by using GaN power amplifier. Moreover, to mitigate mutual interference for different bandwidth signals due to the adaptive transmission speed control function, SAW filter bank structure was used. To verify system requirement satisfaction AWR simulation tool was used.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2992-2994
• /
• 2005

수십 센티미터 이내의 오차를 만족시키는 거리/위치판별 기능 및 저속 데이터 송수신 기능 구현을 주목적으로 발족된 저속 무선 개인영역 네트워크(LR-WPAN: Low Rate Wireless Personal Area Network)의 표준인 IEEE802.15.4a는 간단하고 경제적이며 전력 소모가 적은 송수신기 구조를 요구한다. 이에 본 논문에서는 PEWB(Parallel Energy Window Banks)를 이용한 독창적인 비동기(noncoherent) OOK(On-Off Keying) UWB(Ultra-Wide Band) 송수신기 구조를 제안한다. 또한 무선 다중경로 채널상황을 다소 극복할 수 있는 펄스와 비트 반복 기법을 사용한다. 제안된 송수신기의 잡음 특성 분석을 위해 chi-square 분포가 사용되며, 반복적 계산을 통해 얻어진 임계값을 적용하여 BER(Bit Error Rate) 성능을 분석한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.238-241
• /
• 2001

In this paper, we designed the video transceiver and control data transceiver of ISM bands. They are designed according to the law for radio regulation and can communicate with each other by about 1Km. Also, we developed the remote monitor and control system via radio using designed transceivers for ISM band.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1257-1264
• /
• 2019

A 3-GSymbol/s/lane transceiver, which supports the mobile industry processor interface (MIPI) C-physical layer (PHY) specification version 1.1, is proposed. It performs channel mismatch correction to improve the signal integrity that is deteriorated by using three-level signals over three channels. The proposed channel mismatch correction is performed by detecting channel mismatches in the receiver and adjusting the delay times of the transmission data in the transmitter according to the detection result. The channel mismatch detection in the receiver is performed by comparing the phases of the received signals with respect to the pre-determined data pattern transmitted from the transmitter. The proposed MIPI C-PHY receiver is designed using a 65 nm complementary metal-oxide-semiconductor (CMOS) process with 1.2 V supply voltage. The area and power consumption of each transceiver lane are 0.136 ㎟ and 17.4 mW/GSymbol/s, respectively. The proposed channel mismatch correction reduces the time jitter of 88.6 ps caused by the channel mismatch to 34.9 ps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.10
• /
• pp.921-928
• /
• 2012

In this paper, we propose a novel interference alignment transceiver for multi-cell MIMO downlink channels with arbitrary number of cells and users per cell. We design the receive beamformer to align the interference from undesired base stations to the effective inter-cell interference (ICI) channels. Subsequently, we design the transmit precoder which can nulllify the interference from the corresponding base station. The proposed transceiver design can attain the degrees of freedom (DOF) equal to the number of streams per user. Accordingly, we investigate conditions for the antenna configuration. From numerical results, we confirm that the proposed transceiver design can achieve higher DOF than the conventional scheme under equal antenna configuration.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.240-245
• /
• 2019

This paper is a study result on long distance transmission of underwater acoustic sensor data over cable. The data transceiver is designed using the LVDS (Low Voltage Differential Signaling) transmission scheme, and the jitter characteristics are analyzed by measuring the long distance transmission signal through the cable. In order to reduce the jitter, a pre-emphasis technique is applied to compensate the transmitting signal to be attenuated by long distance transmission, and the transmission characteristics were verified according to the distance.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.371-377
• /
• 2015

This paper is about the RF transceiver designed and implementation for common data link. The trasmitter is configured as a frequency up-converter, a power amplifier and a duplexer. The receiver is configured as a duplxer, a frequency down-converter and a low noise amplifier. The maximum transmission distance, the reception sensitivity is designed to meet the electrical and temperature characteristics and the like. Using a modeling and simulation in order to meet the requirements of the RF transceiver has been designed and implemented. Transmitting output power and Noise Figure has been measured with 38.58dBm and 5.5dB, respectively. All of the electrical and temperature specifications was meet. Was confirmed all of the requirement specification by electrical characteristics test and temperature characteristics test.