• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.217-225
• /
• 2015

Local heating system providing hot air locally to growing parts including shoot apex and flower cluster which were temperature-sensitive organs of cherry tomato was developed to reduce energy consumption for greenhouse heating without decline of crop growth. Growing part following local heating system was composed of double duct distributer which connected inner and outer ducts with hot air heater and winder which moved ducts up and down following growing parts with plant growth. Growing part local heating system was compared with conventional bottom duct heating system with respect to distributions of air and leaf surface temperatures according to height, growth characteristics and energy consumption. By growing part local heating, air temperature around growing part was maintained $0.9{\sim}2.0^{\circ}C$ higher than that of lower part of crop and leaf surface temperature was also stratified according to height. Investigations on crop growth characteristics and crop yield showed no statistically significant difference except for plant height between bottom duct heating and growing part local heating. As a result, the growing part local heating system consumed 23.7% less heating energy than the bottom duct heating system without decrease of crop yield.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.219-224
• /
• 2005

In order to investigate transient behaviour of the CRW(Canard Rotor Wing) type UAV(Uninhabited Aerial Vehicle) propulsion system during flight mode transition considering flow control valve operation, the propulsion system was modelled using SIMULINK commercial program. For transient simulation of the main engine system, the ICV(Inter-Component Volume) method was applied. The valve system is to control the gas flow of the rotary duct system and the main duct system, and the analysis was performed with an assumption that the total gas mass flow of the main engine is the same as summation of the rotary duct flow and the main duct flow, and with consideration of valve loss, flow rate and effective area in valve angle variation. The performance analysis was carried out during flight mode transitions from the rotary flight mode to the fixed wing flight mode and vice versa mode at altitude of 1Km, flight Mach number 0.1 and maximum engine rpm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.36-43
• /
• 2004

The purpose of this paper was development of modified horizontal daylight duct for reflector of light intake, location of outlet diffuser and size as applicable daylighting system for buildings and, verified applicable possibility base on analysis of daylighting performance through full-scale model test. Experimental result showed that ratio of illumination for light duct was measured 0.3∼0.4％ in interior of a room on clear sky. Also, light duct had wide distribution of illumination than duct about 150[cm] and was decided efficient lighting energy saving because of high daylight performance in case of application actual building during daytime.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11c
• /
• pp.1563-1566
• /
• 2003

프로덕트 라인은 다양하고 빠르게 변화하는 시장의 요구사항과 특정 도메인 영역에 속하는 애플리케이션 간의 재사용 가능한 아키텍처 및 컴포넌트의 구성으로부터 연관된 시스템 구축시 생사성과 품질의 향상을 제공함으로써 현재 많은 관심의 초점이 되고 있다. 또한, 이들 프로덕트 라인에서는 프로덕트들 사이의 공통성과 변화성에 초점을 두고 이들 분류 방법으로 휘처 모델링이라는 개념을 주로 사용하여 분석하고 있다. 또한 재사용 가능한 아키텍처는 많은 변화 계획들과 메카니즘을 포함하고 있다. 하지만, 아키텍처를 설계하기 위한 아키텍처에서의 변화성 관리에 대한 명확한 방법이 미흡하다. 따라서 본 논문에서는 재사용 가능한 아키텍처를 설계하기 위해 변화성의 명확한 표현과 아키덱처에서의 적절한 위치를 식별하기 위해, 다양한 변화성 타입을 정의하고, 휘처 모델을 기반으로한 아키텍처의 변화성과 아키덱처의 컴포넌트 관련성에서의 변화성 표현 방법을 기술하고 사례 연구로 웹기반교육 시스템 개발에 적용하고자 한다.

• Computational Structural Engineering
• /
• v.11 no.4
• /
• pp.371-382
• /
• 1998

지난 수 십년 간 컴퓨터는 구조설계에 있어서 그 이용이 증가하고 있다. 구조설계를 위한 컴퓨터 시스템을 개발하기 위해서는 먼저 구조설계에 관련된 정보와 작업을 정형화한 표현이 필요하다. 본 논문은 구조설계에서 설계정보와 설계작업의 이해와 표현이 어려운 분야의 하나인 시스템설계에 대하여 논하고 있으며, 빌딩 프레임구조물의 시스템 설계정보를 표현하는 한 방법을 기술하고 있다. 3차원 공간을 표시하기 위하여 기준평면과 그리드 라인을 정의하였으며, 빌딩 프레임구조물의 시스템을 프레임 서브시스템, 플로어 서브시스템, 시스템요소 기둥의 세 종류의 요소로 분해하였다. 시스템요소 기둥은 프레임의 요소가 아니고, 시스템의 요소이다. 시스템 설계정보를 표현하기 위한 이와 같은 방법을 개체형 통합설계모델의 표기법을 이용하여 표시하였다. 개체형 통합설계모델은 설계정보와 설계작업을 표현하기 위하여 각각 프로덕트 개체와 프로세스 개체를 이용한다. 시스템 설계정보를 위하여 본 논문에서 정의한 프로덕트 개체들은 정형화된 시스템 설계정보를 표현하는데, 이것은 구조설계 CAD 시스템 개발에 유용하다.

• Journal of Information Technology and Architecture
• /
• v.9 no.3
• /
• pp.221-231
• /
• 2012

최근 국방 분야의 모델링 및 시뮬레이션에서는 훈련 비용과 개발 비용을 절감하기 위하여 재구성 가능한 시뮬레이션 모델의 연구를 추진하고 있다. 기존 연구에서는 소프트웨어 프로덕트 라인 공학을 적용하여 BCM(Basic Component Model)을 정의하고 이들을 재구성 할 수 있는 도구를 개발하였다. 하지만 프로덕트를 생성하기 위한 컴포넌트 재구성 시 설계자의 의사를 체계적으로 반영할 수 없으며, 각각의 컴포넌트들의 정량적 요소를 비교,평가 후 컴포넌트를 선택하여 프로덕트를 구성하기 어렵다는 단점이 있다. 따라서 본 논문에서는 컴포넌트 재구성 시 설계자의 의사결정과정을 지원하고자 컴포넌트들의 메타데이터를 조사하고 계층적으로 분석하여 컴포넌트를 선정할 수 있는 방법을 제안한다. 또한 이것을 기반으로 컴포넌트 재구성 조합 모형을 도출 할 수 있도록 하는 의사결정체계를 제시한다. 먼저 의사결정의 한 방법인 AHP(Analytic Hierarchy Procedure)를 이용하여 컴포넌트를 선정하고, 다음으로 선정된 컴포넌트를 검색하고 선택할 수 있는 의사결정지원시스템을 설계 하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.5
• /
• pp.579-587
• /
• 1999

The flow distribution characteristics in a complex duct system have been investigated in this paper by three means, namely experimental measurement, numerical simulation and the Extended T-method analysis. While the exit flow rates predicted by the three-dimensional CFD calculation and those given by the experiment show a close agreement, the results from the one-dimensional Extended T-method are found to differ from the experiment by -22.2% to 26.3% for the various exits. These discrepancies may be attributed to the underlying limitation concerning the fitting loss coefficients, which assume that the flow in front of the fittings is fully developed. It is proposed that, in order to analyse the three-dimensional flow distributions in a complex duct system by one-dimensional analysis such as the Extended T-method, further Improvements to the fitting loss coefficients should be made.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.221-231
• /
• 2021

In the present study, numerical simulation was performed to investigate aerodynamic characteristics of a ducted fan-upper/lower vanes system in hover. Sensitivity analysis of aerodynamic forces for a system component was conducted with the deflection angle of upper vanes varying but at the constant rotational speed and the collective pitch angle of fan blades. Then, vane control performance and duct airload distributions were analyzed in detail to physically understand operating mechanisms of individual vane and interference effect between duct and vanes. Finally, new control concept of operating upper vanes has been proposed to improve the control performance of the full configuration. It is found that the side force and rolling moment of upper vanes increase linearly with the variation of those deflection angle; however, the total side force is significantly small due to the reaction force acted on the duct. It is also found that upper vanes close to the duct contraction side have a key role in changing vane control forces. It is revealed that the duct suction pressure is induced by the interaction with the suction side of upper vanes, while duct pressure recovery by the interaction with the pressure side, leading to increase in duct asymmetric force. When four upper vanes are kept in situ at 0° deflection angle or removed, the total control performance was improved with duct asymmetric force reduced and the total magnitude of roll remarkably increasing up to 80%.

• The KIPS Transactions:PartD
• /
• v.12D no.3 s.99
• /
• pp.395-408
• /
• 2005

Ubiquitous computing spans a very broad range of technologies and needs very complicated user's requirements. There are many scenarios and technologies involved in ubiquitous computing. We need new software development tools and methodology to meet the requirements. A software product line is one of promising new technology for it. A software product line is a set of software intensive systems that share a common, managed set of features satisfying the specific needs of a particular market segment or mission and that are developed from a common set of core assets. Software architecture-based development is the exploration and maturation of the role of software architecture in the product line life cycle. In this thesis, we identify the foundational concepts underlying software product lines and the essential activities to develop the mobile application systems. So, we define, design, and implement the Mobile Application System Architecture(MASA) that includes the development process for applying into mobile business domain and encompass scoping and gathering requirements for the Product line based on Component Based Development(CBD).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.85-95
• /
• 2019

This work shows how to design a robot structure and to control to overcome obstacles while traveling through ducts of various diameters and shapes by three-legged robot. Circuits are centered in the body to connect the three wheel bodies that are driven around the center body with the 4-section slider link structure. Also, the springs are used to contract and expand the robot legs so that it can be caparable of various environments. Geared motor, spring, and belt were selected based on the static and dynamic calculation to be suitable to horizontal and vertical travels. The center body is equipped with a camera and the distance sensors, and a control algorithms are implemented so that it can be successfully performed in L-type and T-type ducts. Using UWB modules and trilateration algorithm, the location of the duct-cleaning robot inside the duct could be identified successfully.