• Title/Summary/Keyword: 댐 개발

Search Result 926, Processing Time 0.032 seconds

Water supply reliability analysis of Sand dam (샌드댐의 물공급 신뢰도 분석)

  • Chung, Il-Moon;Lee, Jeongwoo;Kim, Min-Gyu
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.27-27
    • /
    • 2020
  • 샌드댐은 주로 건조지역에서 홍수시 유량을 차단시켜 유송토사와 함께 유입된 물을 장기간 보관함으로써 모래와 물이 함께 저장되며 모래속에 저장된 물을 취수하는 방식의 특수한 저류 구조물이다. 우리나라에서는 아직 적용된 바 없으나 상수도 미급수 지역인 계곡부에서 물을 모래안에 저장하게 되면 증발로부터 오래 견딜 수 있는 장점을 활용할 수 있을 것이다. 본 연구에서는 이와 같은 계곡부 샌드댐의 실제 가뭄시 물공급 신뢰도를 평가하기 위한 분석을 수행하였다. 분석 대상지역은 춘천 서상리로 물공급 능력을 평가하기 위해 유역수문모형 SWAT-K와 저수지 유출추적을 결합한 모의모형을 개발하고 이를 적용하였다. 샌드댐의 제원을 다양하게 고려하여 최적 설계 인자를 도출하기 위해 폭, 높이, 길이 등 구조물의 제원을 다양하게 변경하며 물공급 신뢰도 95 %를 만족할 수 있는지 평가하였다. 일반적인 댐의 이수안전도 평가시에는 분석 단위기간을 5일, 10일로 하고 있으나, 본 연구에서는 유역면적이 작은 관계로 분석 단위기간을 1일로 설정하였다. 총 9년간의 분석을 수행하였고, 5 %에 해당하는 연간 약 18일의 물공급 부족이 발생하는 신뢰도를 기준으로 일 취수량 20-50 ㎥을 적용하였을 때의 물수지 분석을 수행하여 샌드댐과 기존 취수보의 규모에 따른 물공급 능력을 평가하였다.

  • PDF

Fuzzy Optimal Reservoir Operation Considering Abnormal Flood (이상홍수를 고려한 퍼지 최적 저수지 운영)

  • Choi, Changwon;Yu, Myung Su;Yi, Jaeeung
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.32 no.4B
    • /
    • pp.221-232
    • /
    • 2012
  • In this study, the model enhancing the safety of reservoirs and reducing the downstream flood damage by reservoirs system operation during abnormal flood was developed. Linear programming was used for the optimal reservoirs system operation during an abnormal flood and fuzzy inference system was introduced to solve the uncertainty problem which is included in hydrological factors like inflow, water level and inflow variation of reservoir operation. The linear programming model determined the optimal reservoir system operation rules and could be used in situation where water demands varies rapidly during the abnormal flood events using fuzzy control technique. In this study, the optimal reservoirs system operation for Andong and Imha reservoirs located in the upper basin of Nakdong river was performed in order that the design flood discharge at Andong city would not be exceeded for the design flood of 100 year and PMF(Probable Maximum Flood). And the model that determines the release according to the downstream flow discharge, the reservoir storage, the inflow and the inflow variation of each reservoir was developed using the optimal system operation result and fuzzy control technique. The developed model consisted of 224 fuzzy rules according to the conditions of Andong reservoir, Imha reservoir and Andong city. And the release from each reservoir could be determined when the current data are used as input data through the developed GUI.

Multiple Regression Equations for Estimating Water Supply Capacities of Dams Considering Influencing Factors (영향요인을 고려한 댐 용수공급능력 추정 회귀모형)

  • Kang, Min Goo;Lee, Gwang Man
    • Journal of Korea Water Resources Association
    • /
    • v.45 no.11
    • /
    • pp.1131-1141
    • /
    • 2012
  • In this study, factors that influence water supply capacities of dams are extracted using factor analysis, and multiple regression equations for estimating water supply capacities of dams are developed using the analysis results. Twenty-one multi-purpose dams and twelve Municipal and Industrial (M&I) water supply dams are selected for case studies, and eight variables influencing water supply capacities of dams, namely: watershed area, inflow, effective reservoir storage, grade on amount of M&I water supply, grade on amount of agricultural water supply, grade on amount of in-stream flow supply, grade on river administration, and grade on average rainfall, are determined. Two case studies for multi-purpose dams and M&I water supply dams are performed, employing factor analysis, respectively. For the two cases, preliminary tests, such as reviewing matrix of correlation coefficient, Bartlett's test of sphericity, and Kaiser-Meyer-Olkin (KMO) test, are conducted to evaluate the suitability of the variables for factor analysis. In case of multi-purpose dams, variables are grouped into three factors; M&I water supply dams, two factors. The factors are rotated using Varimax method, and then factor loading of each variable is computed. The results show that the variables influencing water supply capacities of dams are reasonably selected and appropriately grouped into factors. In addition, multiple regression equations for predicting the amounts of annual water supply of dams are established using the factor scores as explanatory variables, it is identified that the models' accuracies are high, and their applications to determining effective storage capacity of a dam during dam planning and design steps are presented. Consequently, it is thought that the variables and factors are useful for dam planning and dam design.

A Study on the Development of a Dam Operation Table Using the Rainfall Matrix (강우 매트릭스를 활용한 댐 운영 조견표 개발에 관한 연구)

  • Jeong, Changsam
    • Journal of Korean Society of Disaster and Security
    • /
    • v.13 no.2
    • /
    • pp.39-51
    • /
    • 2020
  • Recently, flood damage has been increasing in Korea due to frequent local torrential rains caused by abnormal weather conditions. According to the calculation of the recurrence period of torrential rain that occurred in North Chungcheong Province on July 16, 2017, it was estimated that the rainfall frequency in the upper are of Goessan Dam was around 1,524 years, and the highest level of Goesan Dam rose to EL.137.60 meters, leaving only 5 cm of margin until the height of the dam floor (EL.137.65 meters). The Goesan Dam, which operated for 62 years since 1957, needs to be prepared to cope with the increase of floodgate volume in the basin, the development of a single purpose dam for power generation only, and there are no measurement facilities for flood control, so efficient operation methods are needed to secure the safety of residents in upper and lower regions. In this study, a method of dam operation was proposed by constructing a rain matrix for quick decision making in flood prediction, calculating the highest level of dam for each condition in advance, and preparing a survey table, and quickly finding the level corresponding to the conditions in case of a situation.

A Study on Simulation of Dam-break Wave Using Two-dimensional Finite Volume Model (2차원 유한체적모형을 이용한 댐 붕괴파 모의에 관한 연구)

  • Jeong, Woo-Chang;Park, Young-Jin
    • Journal of Korea Water Resources Association
    • /
    • v.44 no.3
    • /
    • pp.249-262
    • /
    • 2011
  • In this study, in order to reduce the numerical oscillation due to the unbalance between source and flux terms as the HLLC scheme is applied to the flow analysis on the irregular bed topography, a unstructured finite volume model based on the well-balanced HLLC scheme and the shallow water equations is developed and applied to problems of dam-break waves. The well-balanced HLLC scheme considers directly the gradient of bed topography as the flux terms is calculated. This scheme provides the good numerical balance between the source and flux terms in the case of the application to the steady-state transcritical flow. To verify the numerical model developed in this study, it is applied to three cases of hydraulic model experiments and a field case study of Mapasset dam failure (France). As a result of the verification, the predicted numerical results agree relatively well with available laboratory and field measurements. The model provides slightly more accurate results compared with the existing models.

Water Supply and Reliability Increment by Dams Connection (댐간 연결을 통한 공급량 증대 및 신뢰도 향상)

  • Lee, Gwang-Man;Lee, Seung-Yoon;Lee, Eul-Rae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2010.05a
    • /
    • pp.317-321
    • /
    • 2010
  • 대부분의 유역에는 다수의 댐이 건설되어 운영되고 있는 것이 일반적이며, 이들 댐 군의 효과를 극대화하기 위하여 연계최적운영 기법의 적용이 일반화 되고 있다. 2000년 수립된 국가장기수 자원계획에서도 이미 4대강 수계의 댐 군의 연계운영 효과로 2011년까지 6억 $m^3$를 반영하고 있다. 또한 프론티어 연구개발사업을 통해 순수한 시스템적인 개선으로 30억 $m^3$의 용수를 추가적으로 확보하는 방안이 오래전부터 진행되어 오고 있다. 이와 같은 방법론의 핵심은 수문기상의 예측정도를 높이고 장단기 강우-유출을 사전 혹은 실시간으로 예측하여 수자원시설물의 기능을 최대화시키는 전략으로 현재와 같이 댐과 같은 수리구조물을 신규로 건설하는데 어려움이 많은 경우 유용한 대안이 될 수 있다. 그러나 수리구조물의 운영에 필요한 많은 변수 중에서 가장 예측이 어려우며 또한 효과를 평가할 수 있는 가장 핵심적인 요소인 수문사상에 대한 정보의 신뢰도에는 한계가 있다. 다시 말하면 현재와 같은 상황에서 수자원시설물의 시스템적인 개선을 통한 편익의 신뢰도가 구조물적인 효과의 신뢰도를 보장하기 어렵다는 것이다. 결국 주어진 여건에서 수자원이용의 효과를 극대화시키기 위해서는 구조적 대안과 시스템적인 기법을 같이 적용할 수밖에 없으며 상호 보완적으로 활용하는 것이 가장 합리적일 것이다. 이와 같은 측면에서 구조적인 댐간 연결은 일정범위까지는 확실한 효과를 담보할 수 있으며 이 또한 시스템적으로도 유용할 것이다. 본 연구에서는 이와 같은 개념을 안동댐과 임하댐이 도수터널로 연결될 경우로 가정하여 예상되는 효과에 대하여 평가하였다. 평가방법은 일간연계모의모형과 일간도수연결모의모형을 개발하여 적용하였으며 무효방류량의 감소정도와 용수공급 증가량과 공급의 신뢰도, 부족량의 크기 등을 비교 평가하였다.

  • PDF

Derivation of Repair or Reinforcement Priority of Dam Members using State Assessment (상태평가를 이용한 댐 시설물 부재별 보수·보강 우선순위 도출)

  • Kim, Tae Hyung;Park, Jiyeon;Kwon, Ji-Hye;Choi, Hong Suk
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.285-285
    • /
    • 2015
  • 댐 및 저수지 시설물은 노후화나 안전성 미확보로 인한 파손 또는 붕괴 발생 시 하류부에 막대한 인명과 재산피해 등 치명적인 결과를 초래하게 된다. 이러한 대형 안전사고를 예방하고자 시설물의 안전관리에 관한 특별법에서는 댐 시설물을 규모별로 1, 2종 시설물로 구분하고, 이에 대해 주기적으로 안전점검 및 정밀안전진단을 실시하도록 제도화하는 한편 진단 결과에 따라 보수 보강 등의 안전조치를 의무화하고 있다. 구조물 결함에 따른 보수 보강은 보수재료와 공법 선정시 공법의 적용성, 구조적 안전성, 경제성 등을 종합적으로 검토하여 결정하여야 한다. 손상 부위에 대한 보수 보강은 제한된 예산과 인력을 효율적으로 투자하기 위해 보수재료 및 공법의 선정 뿐만 아니라 보수 보강이 이루어져야 하는 부재에 대한 우선순위를 산정하는 것이 최우선적으로 선행되어야 한다. 안전점검 및 정밀안전진단 세부지침에서는 보수 보강 대책 마련 시안전점검 및 정밀안전진단 결과를 기초로 하여 적정 재료 및 공법을 선정하고, 보수 보강의 수준 및 우선순위를 결정하도록 명시되어 있다. 하지만 우선순위 결정에 대한 가이드라인이 부재하여 불필요한 시공과 비효율적인 예산 투입으로 인해 국가예산의 낭비되고 시설물의 안전까지 위협받게 되는 경우가 발생하고 있다. 따라서 본 연구에서는 시설물의 상태에 따른 적절한 보수 보강 필요성을 판단하고 보수 보강 수준 및 우선순위를 결정하기 위한 방법론을 개발하였다. 댐 시설물에 대한 안전점검 및 정밀안전진단의 종합평가는 평가대상 개별시설에 대하여 상태 평가 및 안전성 평가를 실시한 후 그 결과에 의해 산출된 상태평가지수와 안전성평가지수를 비교하여 평가단계별로 그 결과를 취합하여 종합평가를 실시하고 있다. 따라서 상태평가에 의해 산정된 종합평가 결과를 이용하여 개별 부재의 상태평가값 산정을 위해 하부 단계의 가중치 및 평가 지수 역산하고, 재산정된 가중치 및 평가지수를 이용하여 각 부재에 대한 보수 보강 우선순위를 산정하고자 하였다. 개발된 방법론은 점검 진단 책임기술자 및 시설물 관리주체 담당자가 댐 시설물의 개별부재에 대한 보수 보강 실시 여부를 판정할 수 있는 기준으로, 보수 보강에 대한 정책 결정시 경제성을 고려한 신뢰도 있는 기준으로 활용될 수 있을 것으로 기대된다.

  • PDF

Study on the Precipitation utilization for Drought Determination of Dam & Agricultural Reservoirs (댐·저수지 가뭄 판단을 위한 강수량 활용방안 연구)

  • Son, KyungHwan;Oh, ChangYeol;Lee, JunHo;Won, YooSeung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.379-379
    • /
    • 2019
  • 환경부 홍수통제소에서는 효율적인 수재해 관리 및 안정적 용수공급을 위해 댐 보 연계운영협의회를 운영 중에 있으며, 이를 위해 다목적댐, 용수댐, 농업용저수지 및 다기능보 등 다양한 시설물 운영현황을 관리하고 있다. 그 중, 강수량은 각 시설물들의 운영에 근간이 되고 수재해에 직접적인 영향을 미침에 따라 가장 우선시 관리되는 항목이다. 그러나 시설물별 강수량 활용 기준이 상이하여 가뭄 상황 시 많은 혼란이 야기되고 있다. 예를 들어 섬진강유역에 가뭄이 발생하였고 그 원인으로 A댐 운영자가 해당일로부터 과거 30일 평년대비 강수량, B저수지 운영자가 당년 1월부터 현재까지 누적강수량의 평년대비 강수량을 제시하는데 가용자료 기간이 달라 가뭄에 기여한 강수상황을 구체적으로 인지하기가 어렵다. 한편, 기상청에서는 수문기상가뭄정보시스템 개발을 통해 우리나라 전역에 기상학적 가뭄정보를 제공하고 있다. 다만 다양한 가용자료 기간 구분에 따라 많은 지수들이 제공되고 있어(예: SPI3, 6, 9 등) 가뭄판단 및 예측에 있어 많은 혼돈이 야기되고 있다. 결국, 수자원관리자는 다양한 기상학적 가뭄정보들 중에서 관할 유역 및 시설물에 적합한 자료를 활용할 수 있는 기술개발이 필요하다. 본 연구에서는 댐과 농업용저수지 가뭄판단을 위한 강수량 활용 적정 지속기간을 도출하고자 한다. 이를 위해 각 시설물 상류에 위치한 강수량자료를 수집하고, 유역평균강수량을 계산하였다. 강수량을 30일 단위로 720일까지 매일 누적기간 강수량자료를 예년대비 값으로 변환하였고, 댐과 농업용저수지는 일 단위 예년대비 저수량 값을 활용하였다. 적정 지속기간 분석을 위해 상관성 분석 및 ROC 분석을 수행하였으며, 그 결과 여름철에는 지속기간 1~3개월 강수량, 나머지 기간에서는 지속기간 9개월 강수량 활용이 적절한 것으로 확인되었다. 본 연구결과는 시설물 가뭄관리(운영 및 예측)에 유용하게 활용될 것으로 기대된다.

  • PDF

Laboratory Mix Design of C.S.G Method (C.S.G 공법의 실내 배합설계)

  • Kim Ki-Young;Jeon Je-Sung;Kim Yong-Seong
    • Journal of the Korean Geotechnical Society
    • /
    • v.22 no.5
    • /
    • pp.27-37
    • /
    • 2006
  • Cemented Sand and Gravel (C.S.G) method has become increasingly popular in Japan and throughout the world as a construction method and material. This method is favorably used for cofferdam and large dam because a quarry and aggregate plant facility can be diminished. Also, this method can reduce construction cost, work duration and destruction of environment. In this paper, a methodology for C.S.G mix design based on so-called soil mechanics approach is proposed for trapezoid-shaped dam. The methodology consists of selection of a suitable aggregate, introduction of compaction method, processing to prepare standard specimens, and determination of mix portions. Also, unconfined compressive strength tests and large triaxial compression tests are performed. From the results of the test, correlation equation among strength, elastic modulus and unit cement is proposed.