• Journal of Convergence for Information Technology
• /
• v.9 no.5
• /
• pp.117-124
• /
• 2019

This paper discusses recent trends in the fabrication of semiconducting materials among the components of thin film transistors used in AMOLED display. In order to obtain a good semiconductor film, it is necessary to change the amorphous silicon into polycrystalline silicon. There are two ways to use laser and heat. Laser-based methods include sequential lateral solidification (SLS), excimer laser annealing (ELA), and thin-beam directional crystallization (TDX). Solid phase crystallization (SPC), super grain silicon (SGS), metal induced crystallization (MIC) and field aided lateral crystallization (FALC) were crystallized using heat. We will also study research for manufacturing large AMOLED displays.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.342-342
• /
• 2016

국내 저수지 17,477개소 중 30~40 여년전에 축조된 곳은 16,646개소로 95.2%가 노후화로 인한 지속적인 유지보수가 필요하며, 기후변화에 따른 대응능력이 현저하게 낮다. 하구둑, 방조제, 대형 농업용저수지 같은 대규모 농업기반시설들은 축조 당시보다 설계홍수량이 2~3배 이상 증가함에 따라 기후변화에 대비하기 위해 조속한 치수능력 증대가 필요하다. 하지만 대형 농업용저수지의 치수능력 증대를 위해서는 지형적 입지조건, 시공 가능성, 경제성 등을 고려하여 여수로의 위치, 규모, 형식 변경 등이 수반된다. 따라서 본 연구에서는 무한천 상류 예당저수지의 여수로 위치변경에 따른 저수지 하류 하천 흐름변화에 대하여 2차원 수치모의 연구를 수행하였다. 본 연구에서는 TELEMAC-2D 모형을 적용하여 저수지 하류 하천의 흐름을 모의하였고, RMA-2 모의결과와 비교검토 하였다. TELEMAC-2D 모형은 상류(subcritical flow)와 사류(supercritical flow) 흐름 모의가 가능하며, 홍수범람 뿐만아니라 동일 격자망으로 유한요소법과 유한체적법 모두 수치모의가 가능한 특징이 있다. 본 연구에서는 시간과 공간에 대하여 2차 정확도를 가지는 WAF(Weighted Average Flux) 유한체적기법과 $k-{\varepsilon}$ 난류모형을 적용하였다. 수치모의시 유역종합치수계획의 30년, 50년, 100년 빈도 계획홍수량에 대하여 여수로 위치변경 전(CASE-1)과 위치변경 후(CASE-2) 저수지 하류하천 흐름변화에 대해 모의하였다. 본 연구는 국내 하천 특성을 반영한 기설 저수지의 하류하천의 흐름에 대한 수치모의의 기초자료로 활용되어, 저수지 방류 흐름이 하류하천에 미치는 영향 분석 등에 기여할 것으로 기대된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2C
• /
• pp.41-49
• /
• 2009

Due to the increased size of civil infrastructure and the cost of materials, the needs exists for utilizing large sized cast-inplace piles in lieu of conventional precast piles. Among them, the barrette pile has become more commonly used in fields where a diaphragm wall is the retaining wall, to improve workability and economical efficiency, and to ensure hole stability under deep soil layers. In this paper, the bearing capacity and displacement characteristics of the barrette pile are evaluated by using the bi-directional loading test data obtained from four different sites. In addition, the design value of pile shaft resistance, ${\beta}$, is assessed with previous literatures and load transfer analysis. Finally, numerical analyses were performed to analyze the load-displacement behavior, and the interface effect on the piles, using the 3-dimensional finite element method.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.169-201
• /
• 2011

There was a new wave in grocery business with development of information and technology, thus a movement from traditional stores to online stores, In order to expand the scale of traditional supermarket and to satisfy the customers' needs, they provide offline and online services simultaneously. This paper is based on the previous studies which had been researched in developed countries from late 1990s to early 2000s and the purpose of this study is to introduce the idea and operation system of e-Grocery business. Moreover, we suggest the alternatives on delivery service methods in order to satisfy the customers' needs through analyzing the current condition of e-Grocers in Korea. According to the result of this study, Korean e-Grocers offer only attended home delivery services. In our opinion, Korean supermarkets have to take hybrid model which Tesco.com is using. There are some alternatives to increase the profits of Korean e-Grocers and to provide better services to their customers as follows: As an alternatives for delivery services, picking service is the easiest and cheapest way to apply for supermarkets. This is very useful for working women and also it is possible to order by smartphone recently. They can order the goods to the closest local supermarkets from working place, and then they pick them up on the way home from working off. In order to improve the quality of delivery services, to use the reception box will be the way to provide better services to the customers. The reception box is a way to protect the quality of goods such as fresh-cut product, which require the freshness through the temperature adjustment, and also to keep the safety of ordered goods through locking system Through this system, supermarkets are able to use attended or unattended services under the customers' satisfaction. However, using the reception box is expensive, so shared reception box will be an alternative. As an alternative for development of e-Grocery business, the advertisement for e-Grocery business has to be supported in order to attract potential customers in e-Grocery business. Furthermore, the main concerns of e-Grocery business such as the sanitation and safety of goods, and convenience must be guaranteed in order to keep the loyal customers and to attract new customers.

• Fire Science and Engineering
• /
• v.31 no.4
• /
• pp.95-102
• /
• 2017

The fires in the traditional markets often occur recently with the most of them expanded into great fires so that the damage is very serious. The status of traditional markets handling the distribution for ordinary people is greatly shrunk with the aggressive marketing of the local large companies and the foreign large distribution companies after the overall opening of the local distribution market. Most of the traditional markets have the history and tradition from decades to centuries and have grown steadily with the joys and sorrows of ordinary people and the development of the local economy. The fire developing to the large fire has the characteristics of the problem that the fire possibility is high since all products can be flammable due to the deterioration of facilities, the arbitrary modification of equipment, and the crowding of the goods for sale. Furthermore, most of the stores are petty with their small sizes so that the passage is narrow affecting the passage of pedestrians. Accordingly, the traditional markets are vulnerable to fire due to the initial unplanned structural problem so that the large scale fire damage occurs. The study is concerned with systematically classifying and analyzing the result by applying the TRIZ tool to the fire risk factors to extract the fundamental problem with the fire of the traditional market and make the active response. The study was done for preventing the fire on the basis of it and the expansion to the large fire in case of fire to prepare the specific measure to minimize the fire damage. On the basis of the fire expansion risk factor of the derived traditional market, the study presented the passive measures such as the improvement of the fire resisting capacity, the fire safety island, etc. and the active and institutional measures such as the obligation of the fire breaking news facilities, the application of the extra-high pressure pump system, the divided use of the electric line, etc.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.309-316
• /
• 2020

Waterway design should prioritize appropriate channel width to ensure preferential safe passage for the arrival and departure of vessels. To calculate the minimum channel width required for safe passage a comprehensive review of several factors is required. These factors include vessel maneuverability, determined by vessel size, type and speed; environmental factors such as wind, tide, and wave action; human factors, including personal experience and operator judgment as well as marine traffic and navigation support facilities for decision making. However, the Korean channel width design standard is based only on vessel length, and requires improvement when compared with the standards of PIANC, USA, and Japan. This study aims to estimate the appropriate channel width required for one-way traffic in a straight channel, considering various vessel and environmental factors, using Fast Time Simulation (FTS). When the wind speed is 25 knots, with a current speed of 2 knots and a normal vessel speed of 10 knots FTS shows that a 150K GT Cruise Ship requires a minimum channel width of 0.67-0.91 the vessel length (L), whereas a 120K TEU Container Ship and a 300K DWT VLCC require 0.79-1.17 and 1.02-1.59, respectively. Such results can be used to calculate the minimum channel width required for safe passage as an improved Korean design standard.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.889-898
• /
• 2022

In this paper, parallel computing method on the three-dimensional electromagnetic field is proposed. The present electromagnetic scattering analysis is conducted based on the time-harmonic vector wave equation and the finite element method. The edge-based element and 2^nd -order absorbing boundary condition are used. Parallelization of the elemental numerical integration and the matrix assemblage is accomplished by allocating the partitioned finite element subdomain for each processor. The graph partitioning library, METIS, is employed for the subdomain generation. The large sparse matrix computation is conducted by MUMPS, which is the parallel computing library based on the multi-frontal method. The accuracy of the present program is validated by the comparison against the Mie-series analytical solution and the results by ANSYS HFSS. In addition, the scalability is verified by measuring the speed-up in terms of the number of processors used. The present electromagnetic scattering analysis is performed for a perfect electric conductor sphere, isotropic/anisotropic dielectric sphere, and the missile configuration. The algorithm of the present program will be applied to the finite element and tearing method, aiming for the further extended parallel computing performance.

• Cartoon and Animation Studies
• /
• s.17
• /
• pp.147-161
• /
• 2009

Colors in design elements are visual non-verbal symbols both sensual and emotional. It is the first priority in the selection of products for the consumers, and also represents differentiated strategies and coherent integration symbols for the brand. Colors in advertising is an important tool to represent the long-term image management for the brand as well as the product image and concept of the advertise. The theme of this paper is to develop creative advertisement analyzing colors from automobile video ads. Analysis results showed that video ads with small cars under 2000cc preferred pastel colors with high saturation and brightness to emphasize on individuality rather than authority. On the other hand video ads with big and luxury cars upper 2000cc preferred dark colors with lower saturation and brightness. Small car video ads focused on product appearance showing the practical value of the car, big luxury car video ads focused on the symbolic image feeling the difference between the representation of the ads. Colors used in advertisement represents the sensitivity of the consumers. In video ads the concept of the color should be set by identifying on who the globule targets are and on what item you show by identifying the corresponding colors sensitivity to suit your advertising strategy will increase the value of the brand and products.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.358-364
• /
• 2001

To obtain information for the proper fertilization management of cut-flower roses, the amount of macro and micro elements absorbed by cut-flower roses from soil for a year was investigated. Three cut-flower rose cultivars which are called 'Grandgara', 'Nobless', and 'Centina' were transplanted to a sandy loam soil, N-P-K standard fertilization was applied to the soil, and drip irrigation was done at the level of 10 kPa soil moisture tension. There was not significantly different in the harvest amount of cut-flower rose between 'Grandgara' and 'Nobless', but the harvest yield of 'Centina' was about 63% level when compared to that of 'Grandgara'. Considering seasonal changes in the content of nutrients in plant, parts, the uptake of untrients was higher in winter season than that in spring and summer seasons. Except for 'Centina', the nutrient amount removed from plant parts of 'Grandgara' and 'Nobless' increased with the sequence of floral part < stem < leaf, indicating that it is more dependent on biomass yield than on the content of nutrients in each plant part. The ratio of N/K amount absorbed by 'Nobless' and 'Centina' was 1.13 and 1.28. respectively, lower than 1.68 of 'Grandgara', showing that the requirement for K is greater in 'Nobless' and 'Centina' than in 'Grandgara'. The use efficiency of nutrients by cut-flower roses ranged from 39 to 64% in nitrogen, 5 to 9% in phosphorus, and 37 to 67% in potassium. It suggests that the requirement for P in cut-flower roses is very low.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.51-61
• /
• 1989

Recently, the growth in the propulsion power and propeller size of typical energy saving ships has resulted in severe damages of the oil-lubricated stern tube bearing. Consequently, a more rational analytical method for the design of the shafting system is required. In this paper an analytical method applicable to the design of the oil-lubricated stern tube bearing and shafting system is presented. The method consists of the finite element analysis of the shafting system and the oil film hydrodynamics. The shafting system is modeled as a three-dimensional problem using beam elements taking account for the steady components of thrust, lateral forces and moments of the propeller as well as the elastic foundation effects. The oil film hydrodynamics is modeled as a two-dimensional problem. Equal and retangular elements employing hourglass control method are used for the construction of the oil film fluidity matrix. To search the quasi-static equilibrium position between the propeller shaft and the oil film, an optimization technique is employed. Some numerical results based on the proposed method are compared with some measured and numerical data available. They show acceptable agreements with the data.