• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.94-106
• /
• 2022

In order to increase timber self-sufficiency, Korea's 6th Basic Forest Plan aims to increase the density of forest roads to 12.8 m ha^-1 by 2037. However, due to rapid re-forestation, current management infrastructure is insufficient, with just 4.8 m ha^-1 of forest roads in 2017. This is partly due to time and cost limitations on the process of forest road feasibility evaluation, which considers factors such as topography and forest conditions. To solve this problem, we propose an eco-friendly and efficient forest road network planning method using a geographic information system (GIS), which can evaluate a potential road site remotely based on spatial information. To facilitate such planning, this study identifies forest road construction priorities that can be evaluated using spatial information, such as topography, forest type and forest disasters. A method of predicting the optimal route to connect a forest road with existing roads is also derived. Overlapping analysis was performed using GIS-MCE (which combines GIS with multi-criteria evaluation), targeting the areas of Cheongsong-gun and Buk-gu, Pohang-si, which have a low forest-road density. Each factor affecting the suitability of a proposed new forest road site was assigned a cost, creating a cost surface that facilitates prioritization for each forest type. The forest path's optimal route was then derived using least-cost path analysis. The results of this process were 30 forestry site recommendations in Cheongsong-gun and one in Buk-gu, Pohang-si; this would increase forest road density for the managed forest sites in Cheongsong-gun from 1.58 m ha^-1 to 2.55 m ha^-1. This evaluation method can contribute to the policy of increasing timber self-sufficiency by providing clear guidelines for selecting forest road construction sites and predicting optimal connections to the existing road network.

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.477-490
• /
• 2022

Serious Accident Punishment Act(SAPA) went into effect as of Jan. 27, 2022. The subject of study was the worker of the nuclear medicine department and the investigation was aimed at identifying the present situation of their understanding on the issue in the here and now, which can be utilized as basic research for further study. The survey was conducted on 51 people of the worker in the nuclear medicine department. The general factors were classified by their gender, the scale of the hospitals, the period of career, and the detailed occupational categories. The conclusion was drawn, including 1 missing data in gender and 2 in the type of occupation. The targeted hospitals were tertiary hospital, university hospital, and general hospital which have nuclear medicine department in. The period of subjects' career was categorized by less than 3 years, 3 to 5 years, 5 to 10 years, and more than 10 years. The specific occupation was classified by in-vivo radiological technologist, radiation safety manager and others. The amount of pressure that the job entails was highest in the category of general hospital, the period of 3 to 5 years of job experience, and radiation safety manager each. The system of the code was well constructed in the category of general hospital, the period of less than 3-year career, and radiation safety manager, as they responded. The blood transmissible disease had the largest number of outbreak of accidents related to the serious industrial accident. In addition, the radiopharmaceutical dosing error had the highest number of outbreak of accidents related to the serious civil accident. Therefore, we need to improve SAPA, facility inspection, security of budget, security of professional manpower. It will help the stable use of radiation and ensure patient safety.

• Journal of Korean Port Research
• /
• v.6 no.2
• /
• pp.65-92
• /
• 1992

The Korean central government has not appreciate the full extent of the impact of seaports on the national economy. As a consequence port investment has not been given sufficient priority and capacity has failed to keep pace with demand. The principal reason for this failure is the fact that the linkages (or relationships) of the port transport industry with other sectors have not been quantified and fully appreciated. To overcome this dificiency this paper developed a port input-output model to determine the economic impact of the port industry on the national economy. This impact study was conducted by analysing the impact of the Korean port industry upon the national economy from the macroeconomic viewpoint, and identifying the spreading effects of port investments upon the nation's economy. The analysis of the economic impact of the port industry suggests that its contribution to the Korean economy is substantial. What the model shows is, in quantifiable terms, there are the strong economic linkages between the port industry and the other sectors of the national economy. The contribution of the port industry to the Korean economy was summarised in the Conclusion section.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.25-32
• /
• 2009

Currently, various types of TDM (Transportation Demand Management) policies are being studied and implemented in an attempt to overcome the limitations of supply oriented policies. In this context, this paper addressed issues of effectiveness and possible domestic implementation of the HOT lane. The possible site of implementation selected for this simulation study is part of the Kyung-bu freeway, where a dedicated bus lane is currently being operated. Minimum length of distance required in between interchanges and access points of the HOT lane for vehicles to safely enter and exit the lane, and traffic management policies for effectively managing the weaving traffic trying to enter and exit the HOT lane were presented. A 5.2km section of freeway from Ki-heuing IC to Suwon IC and a 8.3km section from Hak-uei JC to Pan-gyo JC have been selected as possible sites of implementation for the HOT lane, in which congestion occurs regularly due to the high level of travel demand. VISSIM simulation program has been used to analyze the effects of the HOT lane under the assumption that one-lane HOT lane has been put into operation in these sections and that the lane change rate were in between 5% to 30%. The results of each possible scenario have proven that overall travel speed on the general lanes have increased as well by 1.57~2.62km/h after the implementation of the HOT lane. It is meaningful that this study could serve as a basic reference data for possible follow-up studies on the HOT lane as one effective method of TDM policies. Considering that the bus travel rate would continue increase and assuming the improvement in travel speed on general lanes, similar case study can be implemented where gaps between buses on bus lane are available, as a possible alternative of efficient bus lane management policies.

• Korean Journal of Health Psychology
• /
• v.14 no.3
• /
• pp.579-596
• /
• 2009

This study aimed to develop the Korean tool of competency to consent to psychiatric treatment and to analyze the reliability and validity of this tool. Also the developed tool's efficiency in determining whether a patient possesses treatment consent competence was checked using the Receiver Operating Characteristic curve and the relevant indices. A total of 193 patients with mental illness, who were hospitalized in a mental hospital or were in community mental health center, participated in this study. We administered a questionnaire consisting of 14 questions concerning understanding, appreciation, reasoning ability, and expression of a choice to the subjects. To investigate the validity of the tool, we conducted the K-MMSE, insight test, estimated IQ, and BPRS. The tool's reliability and usefulness were examined via Cronbach's alpha, ICC, and ROC analysis, and criterion related validation was performed. This tool showed that internal consistency and agreement between raters was relatively high(ICC .80~.98, Cronbach's alpha .56~.83)and the confirmatory factor analysis for constructive validation showed that the tool was valid. Also, estimated IQ, and MMSE were significantly correlated to understanding, appreciation, expression of a choice, and reasoning ability. However, the BPRS did not show significant correlation with any subcompetences. In ROC analysis, full scale cutoff score 18.5 was suggested. Subscale cutoff scores were understanding 4.5, appreciation 8.5, reasoning ability 3.5, and expression of a choice 0.5. These results suggest that this assessment tool is reliable, valid and efficient diagnostically. Finally, limitations and implications of this study were discussed.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.241-253
• /
• 2023

In the current rapidly changing environment, each country continues to make efforts to create jobs and strengthen technological competitiveness. In particular, support and revitalization policies for venture companies and start-ups are known to play a role in increasing national competitiveness. Companies should make appropriate replacements amid growing uncertainties in the environment in which business life is shortened and customer needs are diversified due to intensifying competition. First of all, it is important for companies to make efforts to strengthen their internal capabilities on their own. However, venture companies lack internal resources and capabilities, so support from the external environment is important enough to lead to the survival of the company(Timmons, 1994). Financial support and certification systems are being operated at the national level to strengthen the competitiveness of companies. However, financial support can lower a company's self-sustainability depending on the situation, so non-financial support such as R&D support and start-up education is considered to be helpful in the long term for venture growth(Aghion et al., 2012; Jeon & Ko, 2021). Non-financial support is divided into commercialization, facilities, space, childcare, manpower, and certification systems, and this study confirmed the benefits of the venture company confirmation system, which is a certification system. To this end, the 2021 venture company precision survey data and venture company sales data were used, and analyzed using the SPSS 26.0 package and SPSS PROCESS MACRO. As a result of the analysis, it was confirmed that the level of the management environment of venture companies has a positive effect on the benefits of the venture confirmation system or increasing the level of venture company capabilities, but it is difficult to lead to actual management performance. In addition, it was confirmed that the level of venture company competency mediates the relationship between the level of the venture company's business environment and management performance. As a result, even if the level of the venture company's business environment is positive or venture-friendly, it can be said that companies with internal capabilities to digest support from the external environment increase management performance.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.3
• /
• pp.60-79
• /
• 2012

Environment of ancient Chinese Buddhist temple can be classified to three types such as regional society(鄕村), famous mountain(名山), and urban areas(都市). This made differences in environment where a temple existed and in turn, affected development of Buddhism. And this made another type in relationship between Buddhist temple and a society. This study explains influences which regional society gave on not only Buddhist temple and a monk but also existence and development of Buddhism. When temples are placed in different environmental position, that is, urban areas and regional society, among a social structure, they eventually should adapt to a different society externally and internally. As told in above, ancient Chinese Buddhist temple was located in regional society, famous mountain, and urban areas. Since Eastern Jin and Sixteen Kingdoms, as number of temple much increased, and temples and monks were concentrated on famous mountain, temples in famous mountains and urban areas had developed showing similar aspects each other. But because temples in regional society were influenced a little differently, this study focused on the point. There are four kinds of influences between temples and monks in regional areas. Monks in regional areas had a comparatively close relationship with a society because they came from same area or surrounding areas. Therefore,powers of regional areas restrict influences made by monk group in temple. Second, temples in regional areas shared their joys and sorrows depending on regional economy. Temples in regional areas became a public place for the society and often a market place. In fact, construction and existence of a temple originally became a driving force in regional economy. This is because construction of temple needs artisans and materials and some temples had visitors and included market economy like consumption of incense and candles, though the economic size was large or small. And when regional areas experienced natural disaster or man-made disaster or had poor harvest or economy was in depression, monks left temples and then, temples themselves could not exist. Third, the relationship between temples in regional areas and Buddhists was distinguished from the temples in urban areas and famous mountains. This is because temples in China were places where monks practiced and at the same time, places where general Buddhists worshipped. So there were always a number of Buddhists around the temples. Forth, Buddhism in resional areas was connected to regional Folk beliefs. As a result, Buddhism was spread across the nation, worship with local color often was changed to Buddhist belief or was tinged with Buddhism. While temples in regional areas maintained a close relationship with regional society.they were influenced by the region or gave influences. As a representative example, temples in regional areas showed model behaviors instead of roles of facilities related to various cultures with comparatively advanced level - for example, school, hospital etc. The temples highly affected funerary rites in regional areas. Chinese tombs were mainlymade in regional areas. After death,people living in urban areas were buried in hometown or at least, they were buried in suburbs not urban areas. Temples in regional areas generally participated in funerary rites. Above shows that though most of famous Buddhist temples were located in urban areas not in famous mountains,majority of temples were located in vast regional areas. Through mutual interaction between temples and regional society, the temples in the regional areas were related to Chinese people of over 90% and regional areas became the most important foundation for Buddhism in China. Mutual influences between temples in regional areas and the general public in regions were omnidirectional and spreaded to every aspects of social life in small or large degree. Thus Tombs in temple were widely spreaded across regional areas over time and space. This is enough to explain a close relationship between Buddhist temples and rural society in ancient China.

• Journal of Nutrition and Health
• /
• v.42 no.1
• /
• pp.23-37
• /
• 2009

The purpose of this study was to investigate the health status of preschool children using the questionnaires about dietary behaviors and anthropometric indices. And also nutritional status was investigated using questionnaires for 24-hr recall method. The study was conducted in 145 children aged 3 to 6 years and questionnaires for dietary behaviors and dietary intakes were performed by mothers of children in Ulsan. Just nine percent of children were graded as good in terms of having healthy eating habits, this means that the nutrition education for the dietary behaviors should be more focused on preschool children. With regard to the frequency of food intake, children consumed green & yellow vegetables less frequently, meanwhile consumed high protein source food (meat, egg and bean) and milk and its product more frequently. Children almost never consumed fried foods as often as 1-2 times a weak. In assessment of the health status, children have the highest prevalence of colds and allergy, but lower prevalence of clinical symptoms due to the nutritional deficiency. The mean height was $103.6\;{\pm}\;6.4\;cm$ and significantly different among age (p < 0.05), but was not significantly different between sex. The mean weight was $17.8\;{\pm}\;3.0\;kg$ and significantly different in 5, 6years old among age. By the WLI criteria, 11.1% of children were underweight and 17.4% of children were overweight or obese. By the Rohrer index criteria, any children were not underweight and 86.8% of children were overweight or obese. By the Kaup index criteria, 2.8% of children were underweight and 29.2% of children were overweight or obese. And Obesity Index criteria, 2.1% of children were underweight and 20.8% of children were overweight or obese. The results of obesity rate by all criteria except Rohrer index indicated similar level, were significantly high in age 3 with all criteria, and decreased with age increased. The energy intake of children was lower than EER (Estimated Energy Requirements) of Dietary Reference Intakes for Koreans (KDRIs) by as much as 85.7%. Acceptable Macronutrient Distribution Ranges (AMDR) was 62.6:21.5:15.7 as carbohydrate:protein:lipid, so children consumed protein more, but consumed lipid less compared with those of KDRIs. Vitamin A intake was 133% of recommended intakes (RI) and calcium intake which was identified as the nutrient most likely to be lacking in diets was 98.9% of RI. The intakes of all minerals and vitamins except folate were higher than KDRIs. 33.3% of children were distributed in insufficiency of energy intake, 42.7% of children were distributed in insufficiency of lipid intake. These results indicate that the need of developing of nutrition education program and further concern of a public health center, university and children care center about dietary life for preschool children.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.8-12
• /
• 1974

1. If one unity is given to the prongs whose ends touch each other for estimating the internal stresses occuring in it, the internal stresses which are developed in the open prongs can be evaluated by the ratio to the unity. In accordance with the above statement, an equation was derived as follows. For employing this equation, the prongs should be made as shown in Fig. I, and be measured A and B' as indicated in Fig. l. A more precise value will result as the angle (J becomes smaller. $CH=\frac{(A-B') (4W+A) (4W-A)}{2A[(2W+(A-B')][2W-(A-B')]}{\times}100%$ where A is thickness of the prong, B' is the distance between the two prongs shown in Fig. 1 and CH is the value of internal stress expressed by percentage. It precision is not required, the equation can be simplified as follows. $CH=\frac{A-B'}{A}{\times}200%$ 2. Under scheduled drying condition III the kiln, when the weight of a sample board is constant, the moisture content of the shell of a sample board in the case of a normal casehardening is lower than that of the equilibrium moisture content which is indicated by the Forest Products Laboratory, U. S. Department of Agriculture. This result is usually true, especially in a thin sample board. A thick unseasoned or reverse casehardened sample does not follow in the above statement. 3. The results in the comparison of drying rate with five different kinds of wood given in Table 1 show that the these drying rates, i.e., the quantity of water evaporated from the surface area of I centimeter square per hour, are graded by the order of their magnitude as follows. (1) Ginkgo biloba Linne (2) Diospyros Kaki Thumberg. (3) Pinus densiflora Sieb. et Zucc. (4) Larix kaempheri Sargent (5) Castanea crenata Sieb. et Zucc. It is shown, for example, that at the moisture content of 20 percent the highest value revealed by the Ginkgo biloba is in the order of 3.8 times as great as that for Castanea crenata Sieb. & Zucc. which has the lowest value. Especially below the moisture content of 26 percent, the drying rate, i.e., the function of moisture content in percentage, is represented by the linear equation. All of these linear equations are highly significant in testing the confficient of X i. e., moisture content in percentage. In the Table 2, the symbols are expressed as follows; Y is the quantity of water evaporated from the surface area of 1 centimeter square per hour, and X is the moisture content of the percentage. The drying rate is plotted against the moisture content of the percentage as in Fig. 2. 4. One hundred times the ratio(P%) of the number of samples occuring in the CH 4 class (from 76 to 100% of CH ratio) within the total number of saplmes tested to those of the total which underlie the given SR ratio is measured in Table 3. (The 9% indicated above is assumed as the danger probability in percentage). In summarizing above results, the conclusion is in Table 4. NOTE: In Table 4, the column numbers such as 1. 2 and 3 imply as follows, respectively. 1) The minimum SR ratio which does not reveal the CH 4, class is indicated as in the column 1. 2) The extent of SR ratio which is confined in the safety allowance of 30 percent is shown in the column 2. 3) The lowest limitation of SR ratio which gives the most danger probability of 100 percent is shown in column 3. In analyzing above results, it is clear that chestnut and larch easly form internal stress in comparison with persimmon and pine. However, in considering the fact that the revers, casehardening occured in fir and ginkgo, under the same drying condition with the others, it is deduced that fir and ginkgo form normal casehardening with difficulty in comparison with the other species tested. 5. All kinds of drying defects except casehardening are developed when the internal stresses are in excess of the ultimate strength of material in the case of long-lime loading. Under the drying condition at temperature of $170^{\circ}F$ and the lower humidity. the drying defects are not so severe. However, under the same conditions at $200^{\circ}F$, the lower humidity and not end coated, all sample boards develop severe drying defects. Especially the chestnut was very prone to form the drying defects such as casehardening and splitting.