• Journal of IKEEE
• /
• v.11 no.1 s.20
• /
• pp.61-68
• /
• 2007

Using modal transmission-line theory (MTLT), itexplores rigorously the polarization characteristics of TE-TM mode optical polarized beamsplitter with misaligned input interface. To verify the validity of the approach proposed in this paper, a novel polarization condition is defined, and it compares and evaluates with the polarization condition of coupled-mode theory (CMT) used widely. The numerical results reveal that the discontinuity of misaligned input interface has nothing to do with the polarization condition of beamsplitter. Furthermore, the condition of CMT is no longer effective at the asymmetric guiding structures with strong power coupling.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.4
• /
• pp.329-335
• /
• 2014

This study aimed to understand the internal flow characteristics of a liquid droplet subject to periodic forced vibration. In order to predict the resonance frequency of a droplet, a high-speed camera and macro lens were used to capture internal flow characteristics of a droplet placed on a vibrating hydrophobic surface. Results showed that the droplet assumed a variety of shapes depending on the resonance mode of free droplet, particularly in modes 2, 4, 6, and 8. In addition, the induced internal vortex flow inside the droplet was also observed in each mode. Typically, the induced flow moved upwards along the axis of symmetry and downwards along the surface of the droplet, that is, from the apex to the contact line in modes 2 and 4, after which it broke into a smaller vortex. On the other hand, the large-scale vortex always remained steady in modes 6 and 8. The speed of the flow in mode 4 was always greater than that in mode 2, but those in modes 6 and 8 were similar.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.347-355
• /
• 2002

We have constructed a high efficiency and broad tunable cw Ti:sapphire laser with a four-mirror symmetric Z-type laser cavity to increase the laser usability. From theoretical analyses and experimental data for a symmetric Z-type laser cavity containing a Kerr medium, the cavity mode size and the Kerr-lens mode-locking (KLM) strength for KLM lasers can be confirmed as function of the position in the cavity, the intracavity laser power, and the stability parameter. As a result, the slope efficiency and the maximum average output power of cw Ti:sapphire laser at 5 W pumping power of Ar-ion laser were 31.3% and 1420 ㎽ respectively. The tunablility was ranged from 730 ㎚ to 908 ㎚ with average output power above 700 ㎽. We obtained the KLM operation easily by self-aperturing effect in the Kerr medium and the slope efficiency and the maximum average output power of KLM Ti:sapphire laser was 16% and 550 ㎽ respectively. The spectral bandwidth was 33 ㎚ at the center wavelength of 807 ㎚ and the pulse width was 27 fs with a repetition rate of 82 ㎒.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.6
• /
• pp.1307-1315
• /
• 2017

While the PSK mode of the DTLS is the most efficient in terms of the performance, it is not easy to pre-distribute and manage the symmetric key pairs as the number of sensor devices increases. On the other hand, both the RPK and certificate modes offer a convenient key management tool, but they do not guarantee a good computational performance. In this paper, the end-to-end security protocol suitable for the constrained devices is proposed, based on both the ECQV certificate and the PSK mode. Namely, the initial DTLS handshake is performed using the ECQV certificate, and the subsequent DTLS handshakes with the other CoAP servers in the same group are performed using the PSK mode for the purpose of reducing the overall computational load. Furthermore, a fine-grained access control for the CoAP client can be enforced to allow access to the limited number of CoAP servers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.210-217
• /
• 2011

Evolution of tip vortex generated by a model rotor blade which has a symmetric blade section has been investigated by use of the laser doppler anemometry. Swirl and axial velocity components of tip vortex were measured by the phase averaging technique within one revolution of a rotor blade. It was found that tip vortex becomes matured until 27 degrees and diffuses afterwards with diffusing rate becoming slower compared to the case of the asymmetric blade section, but the tip loss was expected to become more substantial. Swirl velocity components were well fit to n=2 model of Vatistas within measured wake ages, showing the self-similarity exists for the swirl velocity components. The axial components were followed with Gaussian profiles, but had much higher peak values than those of the symmetric blade section.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.66-78
• /
• 2021

In this study, the effect of Symmetry Breaking was compared according to the equivalent ratio condition and the number of nozzles where combustion instability occurs in an annular combustor. Generally, due to the relatively short combustor length, a longitudinal instability was less likely to occur in the annular combustor, but the combustion instability sometimes happens when ducts such as transition piece in gas turbine power station are present. In this case, due to the duct, only the longitudinal instability mode is observed. The characteristics of Symmetry Breaking were investigated according to the number of five lean nozzles and the equivalent ratio combination, and as the equivalent ratio decreased, the effect of Symmetry Breaking rapidly occurred, and the instability was dramatically disappeared and the amplitude was greatly reduced. In addition, it was confirmed that as the number of lean nozzles increased, a phenomenon such as a reduction in the equivalent ratio appeared.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.319-324
• /
• 1996

In this paper, radial sheared eletronic shearopgraphy was studied in order to measure vibration characteristics of circular or radial symmetric objects. We calculated amplitude of vibration by using eletro-optic holography theory, and utilized a porror prism for optical arrangement of sheared two images in this experiment. In this case, the data measured by shearing interferometer give us a distribution of the gradient of vibration amplitude. This developed system is applied to symmetical objects such as fans of airconditioner and circular plates to test vibration characteristics.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.318-321
• /
• 2003

마이크로스트립 구조의 방향성 결합기는 이방성 유전체로 인하여 지향성 특성이 저하된다. 즉 우, 기모드의 위상차에 의해 격리특성이 저하된다. 이러한 문제점을 개선하고자 결합선로간의 대칭형으로 입출력단에 위상 보상용 커패시터를 구현해주어 격리특성을 개선하였다. 보상용 캐패시터는 평면형으로 구현하여 제작의 편리하고, 우, 기모드 위상차를 줄여주어 높은 지향성 특성을 얻을 수 있었다. 부가적으로 결합선로의 길이를 약 10%를 줄 일수 있다. 제시된 방법의 타당성을 입증하기 위하여 12dB, 20dB와 30dB의 마이크로스트립 방향성 결합기를 제작하여 30dB의 높은 지향성 특성을 얻었다.

• The Korean Journal of Rheology
• /
• v.10 no.2
• /
• pp.98-105
• /
• 1998

가공공정중 변형을 수반하게 되는 고분자제품은 대부분 고분자사슬의 배향을 갖게 된다. 이렇나 사슬배향은 제품의 기계적, 광학적, 그리고 전기적 특성에 매우 중요한 영향을 미치는 것으로 알려져있다. 지금까지 고분자사슬의 배향상태를 나타내기 위한 여러방법은 모두 배향의 중심축을이 알려져 있다는 가정하에 전개되었다, 그러나 복잡한 배향모드를 갖 는 고분자가공의 경우에 배향중심측이 실험축과 일치하지 않는 경우가 많다 따라서 본연구 에서는 일반적인 고분자의배향상태를 나타내는 방법에 대해 알아보고 실제 고분자 가공공정 에 적용을 위해 실험적으로 배향의 대칭축을 찾을 수 있는 접근방법을 제시하고자 하였다. 그 결과 결정성 고분자의 배향상태를 광각 x-선 회절 data를 이용한2차배향 tensor를 통해 배향 타원체를 구성할수있었다. 이를PETdustls 필름과 HDPE사출성형물에 적용해 본 결과 이들의 2차 배향 tensor가 타원체를 잘 구성함을 알수 있었다. 또한 주어진 고분자의 결정 면들에 관계없이 고유한 중심축을 지니고 있음을 확인할수 있었다. 이를 통해 복잡한 배향 모드를 갖는 경우에 본연구에서 제안한 x-타원체를 통해 결정의 배향중심축을 효과적으로 찾을수 있음을 알수 있었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2000

This study shows the defect detection and sizing capability of ultrasonic guided waves in the nondestructive inspection of heat exchanger and steam generator tubing. Phase and group velocity dispersion curves for the longitudinal and flexural modes of a sample Inconel tube were presented for the theoretical analysis. EDM(Electric Discharge Machining) wears in tubing under a tube support plate and circumferential laser notches in tubing were detected by an axisymmetric and a non-axisymmetric transducer set up, respectively. EDM wears were detected with L(0, 2), L(0, 3) and L(0, 4) modes and among them L(0, 4) mode was found to be the most sensitive. It was also found that the flexural modes around L(0, 1) mode could be used for the detection and sizing of laser notches in the tubing.