• Analytical Science and Technology
• /
• v.6 no.5
• /
• pp.521-530
• /
• 1993

According to the Montreal Protocol, CFC 113, one of the ozone-depleting substances, will be prohibited to use as a cleaning solvent essentially in the electronic industry. Therefore, the development of the alternative cleaning solvents to CFC 113 is being accelerated. A number of the alternative cleaning solvents are avialable on the market. The alternatives of Axarel 32(DuPont), Cleanthru 750H(KAO Chemical), and EC-Ultra(Petroferm) are chosen for the comparison of cleaning performance with CFC 113. The test methods for measuring the cleaning performance were composed of the measurement of the physical properties, the experiments on the material compatibility with cleaning solvents, the measurement of the evaporation rate, and finally the experiments of the removal efficiency. Normally the basic physical properties of the alternatives had higher boiling points, viscosity and surface tension, which were quite different to those of CFC 113. In terms of solubility of rosin-based flux, the solubilities of abietic acid (nonpolar organic) were similar, but those of the activator (polar organic) in the alternatives were better than CFC 113. The evaporation of the alternatives was very slow, compared to CFC 113, which had much lower boiling point. All the cleaning solvents showed the good material compatibility with FR4 and Cu-coated PCB. The better removal efficiencies of abietic acid were obtained when using the ultrasonic mechanical energy over the dipping method. The experiments also indicated the very slow-eavaporating solvent was not desirable with the dipping cleaning method, and the differences in the removal efficiency of the alternatives with the ultrasonic cleaning method were negligible. Among the alternatives, the overall cleaning performances were obsorved as almost similar. Before selecting the ultimate cleaning solvent, the application of cleaning machine, environmental issues, and economics are simultaneously considered with the cleaning performance.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.443-448
• /
• 2005

Efficient using of the web cache is becoming important factors that decide system management efficiency in the web base system. The cache performance depends heavily on the replacement algorithm which dynamically selects a suitable subset of objects for caching in a finite cache space. In this paper, the web caching algorithm is proposed for the efficient operation of the web base system. The algorithm is designed based on a divided scope that considered size reference characteristic and heterogeneity on web object. With the experiment environment, the algorithm is compared with conservative replacement algorithms, we have confirmed more than $15\%$ of an performance improvement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.473-476
• /
• 2008

The use of the recycled fine aggregate to the material of structural concrete is not easy currently because there are some problems, such as the difficulty of quality control and the badness of chemical and physical property other than river sand, crushed fine aggregate. To use of recycled fine aggregate, many researches on the recycling of recycled fine aggregate have been studying until today. However, the result of the research is little except for some results. Therefore, the purpose of this study is to confirm the possibility of use of recycled fine aggregate for raw material of plaster mortar. In this study, various tests were performed such as flow, air content, unit weight, bond strength, and compressive strength test to evaluate the effect according to the substitution of recycled concrete aggregate. The results of strength test showed that the concrete strength improved with the increase of replacement ratio of recycled fine aggregate. In the other side, flow and air content are decreased according to replacement ratio of recycled fine aggregate. The result of this study could be used as the basic data for the recycling of recycled fine aggregate.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.313-316
• /
• 2000

본 논문에서는 동적 다중경로 환경에 대한 DTV수신 성능 개선을 위하여 정보 데이터 세그먼트 부분에서는 Stop and Go 알고리즘을 사용하고 313 세그먼트 중 한 개만이 훈련열로 쓰이는 기존의 ATSC 표준의 데이터 프레임 구조보다 더 많은 훈련열이 들어있는 새로운 데이터 프레임 구조를 제안한다. 정보가 없는 널 패킷을 훈련열로 대체하기 때문에 데이터의 손실 없이 더 많은 훈련열을 사용하여 특히 동적 다중경로 환경에서 등화기의 수렴 특성을 개선할 수 있다. 전산 모의 실험을 통하여 동적 다중경로 환경의 도플러 천이에 대한 시스템 수신 성능의 개선을 확인하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2021.06a
• /
• pp.70-72
• /
• 2021

본문에서는 TMIV 에서 비디오 코덱으로 사용되고 있는 HEVC 를 MV(Multiview)-HEVC 로 대체한 실험결과를 소개하고 부호화 효율을 향상시키기 위한 아틀라스 생성 구조에 대해 제안하고자 한다. 이를 위해 본 논문에서는 푸루닝(pruning)된 패치를 패킹한 아틀라스 영상으로 구성된 MIV 앵커(anchor)에 MV-HEVC 를 적용하는 구조, 소스 시점영상으로부터 선택된 기본 시점영상으로만 패킹한 아틀라스 영상으로 구성된 MIV view 앵커에 적용하는 구조를 실험한다. 이와 더불어 부호화 효율을 향상시키기 위해 선택된 기본시점 영상을 패킹함에 있어서 2 개의 아틀라스영상에 걸쳐 가장 인접한 시점을 배치하는 아틀라스 영상 구조를 제안한다. 실험결과, 기존의 MIV 앵커에 MV-HEVC 를 적용하면 성능 개선이 거의 없으며, MIV view 앵커와 제안한 MIV view 앵커의 아틀라스영상 구조에 MV-HEVC 를 적용하면 객관적인 성능이 최대로 얻을 수 있음을 알 수 있었다.

• Journal of the Korea Concrete Institute
• /
• v.20 no.5
• /
• pp.573-581
• /
• 2008

In general, conventional sheeting H-pile is often used as a temporary member installed upon construction of outer retaining wall at basement floor. In CBW (composite basement wall), R/C basement wall is combined with H-Pile and resists lateral soil pressure together. This paper presents an experimental results of push out shear test of CBW with stud coupler as shear connectors to combine H-Pile with R/C wall six specimens with different diameter of FT (form tie) and arrangement of shear connectors were tested to evaluate the shear capacity of the composite wall. Test results showed that shear strength increased with diameter of FT. The shear strength of shear connector in CBW could be suitably predicted by using the previous equations codified in the codes. Best correlation, especially, was found when the calculation result by the formula in AISC 360-05 was compared to test one.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.107-108
• /
• 2010

This paper provides test results on the tension stiffening behavior of high strength concrete (HSC) members used silica fume free binder (SFFB) instead of silica fume. The objective of this study is to evaluate the capability of replacing expensive silica fume to SFFB in HSCs with compressive strength of 60 and 80MPa. Test results indicated that for two mixes of 60 and 80 MPa HSC, cracking and strength behavior of tension members, which are replaced silica fume to SFFB, showed equivalent performance to those of tension members used silica fume.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.135-138
• /
• 2000

본 논문에서는 열팽창계수(CTE)가 거의 없는 카본게폭시, PZT 세라믹 박판, 그리고 열팽창계수가 큰 글래스/에폭시 층으로 이루어진 곡면형 복합재료 작동기(LIPCA)의 설계, 제작 및 성능실험에 대한 연구성과를 제시하고 있다. LIPCA의 른 요점은 기존 THUNDER의 성능을 유지하면서 이를 경량화 하기 위하여 THUNDER의 금속 층을 상대적으로 가벼운 섬유 강화 복합재료로 대체하는 것이다. 이러한 경량화 작업으로 LIPCA는 기존 THUNDER 보다 약 30~40% 정도의 무게를 감소시킬 수 있으며, 복합재료의 특성에 따라 설계의 유연성을 가질 수 있는 장점이 있다. 또한, 에폭시 수지를 사용함으로써 접착제 없이 평판 몰드에서 오토클레이브에서 177$^{\circ}C$로 경화되어, 탈형된 후 충분한 곡률을 형성하였다. 작동 성능 실험에서, LIPCA는 기존 THUNDER보다 작동변위가 향상됨을 보였다.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.603-608
• /
• 2024

Nonresponse and missing values are caused by sample dropouts and avoidance of answers to surveys. In this case, problems with the possibility of information loss and biased reasoning arise, and a replacement of missing values with appropriate values is required. In this paper, as an alternative to missing values imputation, we compare several replacement methods, which use mean, linear regression, random forest, K-nearest neighbor, autoencoder and denoising autoencoder based on deep learning. These methods of imputing missing values are explained, and each method is compared by using continuous simulation data and real data. The comparison results confirm that in most cases, the performance of the random forest imputation method and the denoising autoencoder imputation method are better than the others.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.2
• /
• pp.99-107
• /
• 2014

In this study, the effects of curing procedures on the mechanical properties of recycled aggregate concrete (RAC) were investigated. The replacement ratios by recycled coarse aggregate were 0, 25, 50, 75 and 100% by mass of natural coarse aggregate. Steam curing was adopted to all recycled aggregate concrete mixtures. Compressive and split tensile strength, water porosity, chloride ions penetration resistance and drying shrinkage measurements were carried out to determine performance of the RACs. From the test results, it was found that the mechanical performance of RAC decreased as the recycled aggregate contents increased. Furthermore, steam curing reduced the compressive and split tensile strength, water porosity and total charge of RAC, especially at the early ages. However, at the later ages, the beneficial effect of steam curing was less prominent. This study clearly showed that initial steam curing could be one of practical methods to improve performance of RAC with higher replacement ratio of recycled aggregate.