• Journal of Technology Innovation
• /
• v.17 no.1
• /
• pp.1-48
• /
• 2009

Recently we have found some symptoms that R&D fiscal incentives might not work well what it has intended through the analysis of current statistics of firm's R&D data. Firstly, we found that the growth rate of R&D investment in private sector during the recent decade has been slowdown. The average of growth rate (real value) of R&D investment is 7.1% from 1998 to 2005, while it was 13.9% from 1980 to 1997. Secondly, the relative share of R&D investment of SME has been decreased to 21%('05) from 29%('01), even though the tax credit for SME has been more beneficial than large size firm, Thirdly, The R&D expenditure of large size firms (besides 3 leading firms) has not been increased since late of 1990s. We need to find some evidence whether fiscal incentives are effective in increasing firm's R&D investment. To analyse econometric model we use firm level unbalanced panel data for 4 years (from 2002 to 2005) derived from MOST database compiled from the annual survey, "Report on the Survey of Research and Development in Science and Technology". Also we use fixed effect model (Hausman test results accept fixed effect model with 1% of significant level) and estimate the model for all firms, large firms and SME respectively. We have following results from the analysis of econometric model. For large firm: i ) R&D investment responds elastically (1.20) to sales volume. ii) government R&D subsidy induces R&D investment (0.03) not so effectively. iii) Tax price elasticity is almost unity (-0.99). iv) For large firm tax incentive is more effective than R&D subsidy For SME: i ) Sales volume increase R&D investment of SME (0.043) not so effectively. ii ) government R&D subsidy is crowding out R&D investment of SME not seriously (-0.0079) iii) Tax price elasticity is very inelastic (-0.054) To compare with other studies, Koga(2003) has a similar result of tax price elasticity for Japanese firm (-1.0036), Hall((l992) has a unit tax price elasticity, Bloom et al. (2002) has $-0.354{\sim}-0.124$ in the short run. From the results of our analysis we recommend that government R&D subsidy has to focus on such an areas like basic research and public sector (defense, energy, health etc.) not overlapped private R&D sector. For SME government has to focus on establishing R&D infrastructure. To promote tax incentive policy, we need to strengthen the tax incentive scheme for large size firm's R&D investment. We recommend tax credit for large size film be extended to total volume of R&D investment.

• Radiation Oncology Journal
• /
• v.17 no.1
• /
• pp.9-15
• /
• 1999

Purpose : This is a retrospective study to evaluate the response rate, acute toxicity, and survival rate of a combined chemotherapy and radiation therapy in limited disease small cell lung cancer, Materials and Methods : Firty-six patients with limited disease small-cell lung cancer who underwent combined chemotherapy and radiation therapy between October 1994 and April 1998 were evaluated. Six cycles of chemotherapy were planned either using a VIP regimen etoposide, ifosfamide, and cis-platin) or a EP regimen (etoposide and cis-platin). Thoracic radiation therapy was planned to deli- ver 44 Gy using 1 OMV X-ray, starting concurrently with chemotherapy. Response was evaluated 4 weeks after the completion of the planned chemotherapy and radiation therapy, and the prophylaetic cranial irradiation was planned only for the patients with complete responses. Acute toxicity was evaluated using the SWOG toxicity criteria, and the overall survival and disease-free survival were calculated using the Kaplan-Meier Method. Results : The median follow-up period was 16 months (range:2 to 41 months). Complete response was achieved En 30 (65$\%$) patients, of which 22 patients received prophylactic cranial irradiations. Acute toxicities over grade III were granulocytopenia in 23 (50$\%$), anemia in 17 (37$\%$), thrombo- cytopenia in nine (20$\%$), alopecia in nine (20$\%$), nausea/vomiting in five (11$\%$), and peripheral neuropathy in one (2$\%$). Chemotherapy was delayed in one patient, and the chemotherapy doses were reduced in 58 (24$\%$) out of the total 246 cycles. No radiation esophagitis over grade 111 was observed, while interruption during radiation therapy for a mean of 8.3 days occurred in 21 patients. The local recurrences were observed in 8 patients and local progressions were in 6 patients, and the distant metastases in 17 patients. Among these, four patients had both the local relapse and the distant metastasis. Brain was the most common metastatic site (10 patients), followed by the liver as the next common site (4 patients). The overall and progression-free survival rates were 79$\%$ and 55$\%$ in 1 year, and 45'/) and 32% in 2 years, respectively, and the median survival was 23 months. Conclusion : Relatively satisfactory local control and suwival rates were achieved after the combined chemotherapy and radiation therapy with mild to moderate acute morbidities in limited disease small cell lung cancer.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.5
• /
• pp.391-407
• /
• 2003

This study was conducted to investigate the factors affecting the born density of food and nutrition major and non-major university students in Seoul area. Data for food habits, dietary and health-related behavior were obtained by self administered questionnaires. BQI(bone quality index) of the subjects were measured by Quantitative Ultrasound (QUS). The results are summarized as follows: The average height, weight, BMI and osteopenia percentage of the major and non-major male and female student were l74.49cm, 67.05kg, 21.96 and 22.0%; l74.34cm, 65.98kg, 21.69 and 11.8%; l60.76cm, 54.48kg, 21.07 and 40.0%; l61.30cm, 54.22kg, 20.84 and 40.2%, respectively. The BQI of the major and non-major subjects were 108.07 and 110.47 in male student group, and 89.13, 88.18 in female student group, respectively. The T-score and Z-score of bone density of the subjects were not significantly different. Weight and BMI were positively related with BQI in male and female group but the relationship with BMI tended to be stronger in non-major female group than other groups. BQI was positively affected by exercise time, favorite food, and intake of seafood and tea in major and non-major male student group. One-side eating habit and intake of instant foods were negatively related with BQI in both male groups. In major and non-major female student group, exercise time, meal regularity, favorite food, amount of meal, intake of tofu were related with BQI positively and intake of tea and/or meats negatively. The result of this study revealed that desirable food habits, dietary behavior and health-related lifestyle may have a beneficial effect on bone density. They need practically and systematically organized nutrition education on optimum body weight, good eating habits, weight bearing exercise and intakes of good quality nutrient for higher bone density level.

• Korean Journal of Agricultural Science
• /
• v.5 no.2
• /
• pp.149-157
• /
• 1978

This study was carried out to obtain basic data for the type selection of furrow openers for the no-tillage soybean planter trailed by the two-wheel tractor from the standpoint of minimum draft and good performance of furrowing. For this study, two models of furrow opener, hoe and disc type, were tested on the artificial soil stuffed in the moving soil bin. The results obtained were as follows. In the case of disc furrow opener, the drafts were measured according to various diameters of discs under the condition of disc angle $8^{\circ}$ and $16^{\circ}$, working depth 3cm and 6cm, working speed 2.75cm/sec. Minimum draft appeared when the diameter of disc was about 28cm and the drafts increased as the diameter of discs became larger or smaller than this diameter. Specific draft showed almost same tendencies as above but showed the minimum when the diameter was about 30cm. For the purpose of controlling the seeding depth, the relationships between draft and working depths, 3cm and 6cm, were tested. The variations of draft concerning the various working depths showed linear changes and were affected in higher degree by depths than other factors. There were general tendencies at both working depths, 3cm and 6cm, that total draft showed the minimum with the disc diameter of about 28cm and specific draft showed it with the disc diameter of about 30cm regardless of disc angle and working speed. For the purpose of controlling the working width and speed, the relationships among drafts, disc angle and working speed were investigated and there were general tendencies that the draft increased as the angle and speed were increased and the draft was affected more by speed than by angle. To compare the hoe-type with disc-type opener, the specific drafts of hoe openers were compared with those of disc opener of $16^{\circ}$ angle and 30cm diameter. The specific draft of disc-type opener with the diameter of 30cm was $0.35{\sim}0.5kg/cm^2$, while $0.71{\sim}1.02kg/cm^2$ in the case of hoe type with the lift angle of $20^{\circ}$ which is 2 times as much as that of disc type in average value. And the furrows opened by disc openers were cleaner than those opened by hoe openers.

• Korean Journal of Agricultural Science
• /
• v.2 no.2
• /
• pp.341-356
• /
• 1975

This study was carried out to evaluate three winter active synthetic varieties in a succeeding generations of improvement and polycross progenies of seven genotypes selected at the cool and wet climate of the Western Oregon, in their performance of the polycross progeny test comparing with a control variety, high yielding 'Fawn', at Daejon, Korea. Various plant and leaf characteristics, especially related to photosynthesis, and forage production during the first summer after the establishment were examined. The important conclusions of this study are summarized as follows: 1. The differences of leaf fresh weight among groups and control exhibit genetic differences. The a verage of leaf fresh weight of polycross progeny group was the heaviest and those of winter active synthetic varieties in the succeeding generations of improvement was heavier than variety 'fawn'. Within polycross progeny group the genotypes exhibit genetic differences for leaf dry weight. 2. The leaf area exhibited genetic differences among groups and control. The average of winter active synthetic varieties in a succeeding generation was larger than variety 'Fawn'. Those oi the polycross progeny group was the largest among groups and control. 3. Differences of specific leaf weight(S. L. W.) among and within varieties, genotypes and control were not significant. Further investigation in this respect is necessary through the study of the diurnal change in S. L. W. 4. Differences of leaf width among groups and control exhibited genetic differences. The average leaf width of winter active varieties was larger than those of 'Fawn' variety. And those of polycross progenies of genotypes was the largest. 5. Plant height of 'fawn' variety in the first measurement was higher than those of winter active tall fescue varieties and genotypes. The deviation in plant height among polyeross progenies of seven genotypes gave a great deviation. The regrowth ability of plant height was not different suggesting that this characteristics was about the same among and within groups and control. 6. Plant width, spreading ability, improved through the succeeding generations of the improvement of the winter active synthetic varieties for the first measurement. Differences of plant width at the second measurement among genotypes within polycross progeny group were big enough to show the genetic difference. 7. Tiller number of the winter active synthetic varieties and the average of genotypes in polycross progeny was more than those of the control 'Fawn' in the first measurement. On the second measurement, the differences of tiller number appeared among three synthetic varieties indicating improvement, and there were genetic differences among seven genotypes in polycross progeny test. 8. Forage yield on the first cutting showed a considerble improvement of forage yield in the more advanced generation of synthetic varieties and genetic differences among seven genotypes in the polycross progeny test. The average of polycross progeny group was higher than those of the control or three winter active varieties. It was suggested that we could make a further improvement for the forage yield. 9. The regrowth ability of these winter active varieties and genotypes was about the same capacity at least on the measurement of the regrowth in forage yield and plant height during summer. 10. On the whole, the averages of the polycross progeny group was in the highest value and those of synthetic varieties were higher than the control variety, 'Fawn', for the most characteristics except S. L. W. and the plant height on the first measurement even though the differences were not always significant. And there were genetic differences among seven gentypes in their performance of the polycross progeny. 11. Although it was not always sgnificant, the most advanced winter active variety, '1002', had in the highest value for all plant characteristics and forage yield measurements than the other two varieties, '1001'. 12. The results of the association study among various characteristics were quite agreeable and would be useful in the selection of desirable genotypes for the development of a better variety.

• Journal of Radiation Protection and Research
• /
• v.23 no.4
• /
• pp.259-266
• /
• 1998

There are three different types of gynecological applicator sets available in microSelectron-high dose-rate(HDR) System by Nucletron; standard applicator set(SAS), standard shielded applicator set(SSAS), and Fletcher-Williamson applicator set(FWAS). Shielding effect of a SAS without shielding material was compared with that of a SSAS with shielding material made of stainless steel(density ${\varrho}=8,000kg/m^3$) at the top and bottom of each ovoid, and of a FWAS with shielding material made of tungsten alloy(density ${\varrho}=14,000kg/m^3$ at the top and bottom of each ovoid. The shielding effects to the rectum and bladder of these two shielded applicator sets were to be measured at reference points with an ion chamber and specially designed supporting system for applicator ovoids inside of the computerized 3-dimensional water phantom. To determine the middle point of two ovoids the measurement was performed with the reference tip of ion chamber placed at the same level and at the middle point from the two ovoids, while scanning the dose with the ion chamber on each side of ovoids. The doses to the reference points of rectum were measured at 20(Rl), 25(R2), 30(R3), 40(R4), 50(R5), and 60(R6) mm located posteriorly on the vertical line drawn from M5(the middle dwell position of ovoid), and the doses to the bladder were measured at 20(Bl), 30(B2), 40(B3), 50(B4), and 60(B5) mm located anteriorly on the vertical line drawn from M5. The same technique was employed to measure the doses on each reference point of both SSAS and FWAS. The differences of measured rectal doses at 25 mm(R2) and 30 mm(R3) between SAS and SSAS were 8.0 % and 6.0 %: 25.0% and 23.0 % between SAS and FWAS. The differences of measured bladder doses at 20 mm(Bl) and 30 mm(B2) between SAS and SSAS were 8.0 % and 3.0 %: 23.0 % and 17.0 % between SAS and FWAS. The maximum shielding effects to the rectum and bladder of SSAS were 8.0 % and 8.0 %, whereas those of FWAS were 26.0 % and 23.0 %, respectively. These results led to the conclusion that FWAS has much better shielding effect than SSAS does, and when SSAS and FWAS were used for gynecological intracavitary brachytherapy in microSelectron-HDR system, the dose to the rectum and bladder was significantly reduced to optimize the treatment outcome and to lower the complication rates in the rectum and bladder.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.516-526
• /
• 2004

Polymerization shrinkage of photoinitiation type composite resin cause several clinical problems. The purpose of this study was to evaluate the shrinkage strain stress, linear polymerization shrinkage, compressive strength and microhardness of recently developed composite resins. The composite resins were divided into four groups according to the contents of matrix and filler type. Group I : $Denfil^{TM}$(Vericom, Korea) with conventional matrix, Group II : $Charmfil^{(R)}$(Dentkist, Korea) with microfiller and nanofller mixture, Group III : $Filtek^{TM}$ Z250(3M-ESPE, USA) TEGDMA replaced by UDMA and Bis-EMA(6) in the matrix, and Group IV : $Filtek^{TM}$ Supreme(3M-ESPE, USA) using pure nanofiller. Preparation of acrylic molds were followed by filling and curing with light gun. Strain gauges were attached to each sample and the leads were connected to a strainmeter. With strainmeter shrinkage strain stress and linear polymerization shrinkage was measured for 10 minutes. The data detected at 1 minute and 10 minutes were analysed statistically with ONE-way ANOVA test. To evaluate the mechanical properties of tested materials, compressive hardness test and microhardness test were also rendered. The results can be summarized as follows : 1. Filling materials in acrylic molds showed initial temporary expansion in the early phase of polymerization. This was followed by contraction with the rapid increase in strain stress during the first 1 minute and gradually decreased during post-gel shrinkage phase. After 1 minute, there's no statistical differences of strain stress between groups. The highest strain stress was found in group IV and followed by group III, I, II at 10 minutes-measurement(p>.05). In regression analysis of strain stress, group III showed minimal inclination and followed by group II, I, IV during 1 minute. 2. In linear polymerization shrinkage test, the composite resins in every group showed initial increase of shrinkage velocity during the first 1 minute, followed by gradually decrease of shrinkage velocity. After 1 minute, group IV and group III showed statistical difference(p<.05). After 10 minutes, there were statistical differences between group IV and group I, III(p<.05) and between group II and group III(p<.05). In regression analysis of linear polymerization shrinkage, group II showed minimal inclination and followed by group IV, III, I during 1 minute. 3. In compressive strength test, group III showed the highest strength and followed by group II, IV, I. There were statistical differences between group III and group IV, I(p<.05). 4. In microhardness test, upper surfaces showed higher value than lower surfaces in every group(p<.05).

• Journal of agricultural medicine and community health
• /
• v.25 no.2
• /
• pp.353-377
• /
• 2000

This study was performed to investigate the performance state and improvement countermeasure of Primary Health care Posts(PHPs). The operation reports of PHPs(1996 330 PHPs, 1999 313 PHPs) located in Kyongsangbuk-Do and data collected by self-administered questionnaire survey of 280 community health practitioners(CHPs) were analyzed. The major results were as follows: Population per PHP in 1999 decreased in number compared with 1996. But population of the aged increased in number. The performance status of PHP in 1999 increased compared with 1996. A hundred forty one community health practitioners(50.4%) replied that the fiscal standing of PHP was good. Only 1.4% replied that the fiscal standing of PHP was difficult. For the degree of satisfaction in affairs, overall of community health practitioners felt proud. The degree of cooperation between PHP and public health institutions was high and the degree of cooperation of between PHP and private medical institutions was high. The degree of cooperation between PHP and Health Center was significantly different by age of CHP, the service period of CHP, and CHP's service period at present PHP. Over seventy percent of CHPs replied that they had cooperative relationship with operation council, village health workers, community organization. CHPs who drew up the paper on PHP's health activity plan were 96.4 % and only 11.4% of CHPs participated drawing up the report on the second community health plan. CHPs who grasped the blood pressure and smoking status of residents over 70% were 88.2%, 63.9% respectively and the grasp rate of blood pressure fur residents were significantly different according to age and educational level of CHP. CHPs received job education in addition continuous job education arid participated on research program in last 3 years were 27.5%, respectively. CHPs performed the return health program for residents in last 3years were 65.4%. Over 95% of CHPs replied that PHPs might be necessary and 53.9% of CHPs replied that the role of PHPs should be increased. CHPS indicated that major reasons of FHPs lockout were lack of understanding for PHP and administrative convenience, CHPs were officials in special government service governors intention of self-governing body. CHPs suggested number of population in health need such as the aged and patients with chronic disease, opinion of residents, population size, traffic situation and network in order as evaluation criteria for PHP and suggested results of health performance, degree of relationship with residents, results of medical examination anti treatment, ability for administration and affairs in order as evaluation criteria for CHP. CHPs replied that the important countermeasures for PHPs under standard were affairs improvement of PHPs and shifting of location to health weakness area in city. Over 50% of CHPs indicated that the most important thing for improvement of PHPs was affairs adjustment of CLIP. And CHPs suggested that health programs carried out in priority at PHP were management of diabetes mellitus and hypertention. home visiting health care, health care for the aged. The Affairs of BLIP should be adjusted to satisfy community health need and health programs such as management of diabetes mellitus and hypertention, home visiting health care, health care for the aged should be activated in order that PHPs become organization reflecting value system of primary health care.

• Korean Journal of Agricultural Science
• /
• v.16 no.2
• /
• pp.179-200
• /
• 1989

Mucor miehei rennet(MR) was added as calf rennet(CR) substitutes in the fixed amounts of mixed rennets in making Camembert cheese. The conditions in the variations of chemical composition: water-soluble nitrogen, non-caseinic nitrogen, non-proteinic nitrogen, amino nitrogen, ammoniacal nitorgen, electrophoresis, molecular fractionation, mineral distribution, texture characterisitics, free amino acids and free fatty acids, were checked up with the sensory test and the chesse yields at each ripening period. The results obtained by investigating the utility of Mucor rennet were summarized as follows: 1. CR chesse, MR cheese and the mixed-rennet chesse failed to show any significant difference in their yields of 15%. 2. The contents of protein, fat and ash in MR cheese gave lower value than CR cheese did and with progress of ripening lactose decreased rapidly after 14 days of ripening. The difference among the rate of addition of mucor rennet was not recognized. 3. The WSN contents of 5 fresh sample chesse were from 14.7% to 17.3% and WSN increased from 39.7% to 41.0% with progress of ripening. After 21 days of ripening MR chesse had more WSN than CR cheese did. In NCN and ammoniacal nitrogen MR cheese showed higher value. 4. As the ripening progressed, MR chesse showed more cystein, phenylalanine and proline than CR chesse did but it failed to show any increase in aspartic acid, threonine and glutamic acid etc. 5. In the content of free fatty acid MR chesse showed higher value than CR cheese did and with the progress of ripening fatty acids increased from 8.36 mEq to 26.36 mEq but did not show any significant difference in the cheese types by the coagulant ratio. 6. Ca contents in the sample chesse were 0.238-0.27%, Mg 0.019-0.022%, Na 0.910-1.047%, and K 0.175-0.200%. The important non-sedimentable Ca in casein remained from 61 % to 77% without regard the ripening periods and added-rennets and Mg remained from 59.1% to 92.5% in non-sedimentable and water-soluble conditions. 7. In the fractionation of protein by ultrafilteration, MW> $5{\times}10^4$ decresed from 95% at the beginning period of ripening to 45% and MW< $10^4$ increased from 0.2% to 38% and definite caseinolysis was shown in all samples. 8. All the cheese showed to different electrophoretic patterns for the added-amounts of mucor rennet in the 14 days of ripenig. In the 28 days or ripening, MR cheese kept some bands on the patterns compared with CR cheese. 9. In vitro digestibility increased from 81.48-94.81 % to 94.47-98.61% but failed to show any significant difference in the cheese types by the coagulant ratio. 10. In hardness, MR cheese showed lower value compared with CR cheese as the ripening progressed. 11. The results of the sensory test failed to show any difference in flora rind, feelings in mouth and hands, deep structure, flavor and bitterness between CR Camembert cheese and MR Camembert chesse.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.2
• /
• pp.218-230
• /
• 2010

This study was conducted to survey isoflavone intake among adult women in menopause with diseases such as metabolic syndrome and osteoporosis and to analyze the relationship between each of these chronic diseases followed by isoflavone intake and the related health risk index. The average age of the subjects was 49.97 years old, while that of the pre-menopausal subjects was 45.14 years, and the post-menopausal subjects was 55.99 years. The average body mass index (BMI), waist-hip circumference, body fat percentage, blood pressure, blood sugar and blood lipid content of the post-menopausal subjects were higher in significant difference than those of the pre-menopausal subjects. The bone density of the hip and spine in post-menopausal subjects was lower in significant difference than that of the pre-menopausal subjects. After menopause, the subjects had a lower ratio of individuals at risk of anemia when compared with the subjects before menopause, but had higher health risk ratio related to each type of chronic disease, including obesity, hypertension, high cholesterol and osteoporosis than the subjects before menopause. The intake frequency of each soybean food was similar among subjects before/after menopause. The most common soybean based foods consumed by the subjects were soybean, soybean curd and soybean paste. The average daily intake level of isoflavone among subjects before menopause was 25.48 mg, while that of subjects after menopause was 32.25 mg. Evaluation of the distribution of the isoflavone level revealed that the pre-menopausal subjects consumed 3.29~78.36 mg and the post-menopausal subjects consumed 3.18~116.59 mg. The intake level by each individual varied greatly. The pre-menopausal subjects had a low BMI index and systolic blood pressure as much as their isoflavone intake level was high. Additionally, the post-menopausal subjects had a low menarche age and high menopause age when their isoflavone intake level was high, the BMI index and waist-hip circumference ratio was highest among individuals with lowest isoflavone intake level. This study showed that there was a possible relationship between soybean isoflavone intake and health problems such as obesity, high cholesterol, and osteoporosis in women after menopause with diseases such as metabolic syndrome and osteoporosis, even if this relationship was not great.