• Title/Summary/Keyword: 대체경로법

Search Result 42, Processing Time 0.042 seconds

An Evaluation of Blast Resistance Capacity of RC Columns under Eccentric Load (편심하중을 받는 철근콘크리트 기둥의 폭발 저항성 평가)

  • Kim, Han-Soo;Lee, Jae-Yong
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2011.04a
    • /
    • pp.148-151
    • /
    • 2011
  • 현재 방폭설계 관련 설계지침은 기둥제거시나리오를 이용한 대체하중경로법을 주로 적용하고 있지만, 실제로 폭발이 발생하였을 때 기둥의 완전한 파괴가 일어나지 않을 경우 이 방식을 적용하는 것은 적합하지 않다. 따라서 본 논문에서는 비선형 동적 해석 프로그램인 AUTODYN을 이용해 편심하중을 받는 철근 콘크리트 기둥의 잔존 폭발 저항 성능을 평가하는 방식을 제안하였다. 해석결과를 비교해보면 TNT양과 축하중이 클수록 철근콘크리트 기둥의 잔존 폭발 저항 성능이 감소되었다. 이것은 폭발이 발생하기전의 기둥의 편심하중에 의한 응력상태에 따라 폭발 저항 성능이 달라짐을 알 수 있다.

  • PDF

A study on the utilization of complementary and alternative medicine for elementary children (학동기 소아에서 보완대체요법의 이용실태)

  • Ahn, Young Joon;Kim, Eun Young;Moon, Kyung Rae
    • Clinical and Experimental Pediatrics
    • /
    • v.52 no.10
    • /
    • pp.1103-1108
    • /
    • 2009
  • Purpose: Recently, complementary and alternative medicine (CAM) has been increasingly used in children. Studies have shown that 34% of adults and 11% of children use CAM in the USA and Canada. The purpose of this study was to investigate the prevalence and patterns of CAM use in elementary children in Korea. Methods:From July to August 2007, parents of elementary children completed a questionnaire survey at Gwang-ju. In all, 794 questionnaires were analyzed. Results:Of the 794 respondents, 278 answered that their pupils (35%) had experienced CAM. The following types of CAM therapy were used: herbal medicine, 62.5% dietary supplements, 31.2% vitamins, 30.2% and acupuncture, 11.1%. CAM therapies were used for the following diseases: nutritional deficiency, 33.3% atopic dermatitis, 31.3% arthralgia, 31.3% allergic rhinitis, 28.8% obesity, 26.3% and asthma. The following were the motives to use CAM: prevention of diseases (33.5%), dissatisfaction with modern medicine (21.2%), and complementary therapy to modern medicine (20.5%). People gained information about CAM through neighbors (65%) and mass media (21%). Moreover, 83 parents (30%) were satisfied with CAM because of its effectiveness. Conclusion:Many parents have advocated the use of CAM in their children. However, most of them used CAM without any prescription or adequate knowledge. Further studies are required to determine the efficacy of CAM.

Collapse-Resisting Capacity of Steel Moment Frames Using the Linear Elastic Analysis (선형해석방법을 이용한 철골 모멘트골조의 붕괴저항성능)

  • Kim, Jin-Koo;Yang, Jeong-Ho;Kim, Tae-Wan
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.20 no.4
    • /
    • pp.435-442
    • /
    • 2007
  • Since the Ronan Point apartment collapsed in 1968, researches on the progressive collapse have been intermittently conducted, and the collapse of the World Trade Center twin towers made the researches active again. In the United States guidelines such as GSA (2003) and DoD (2005) were provided for design and analysis of building structures against the progressive collapse. In this study the progressive collapse-resisting capacity of steel moment resisting frames designed by KBC-2005 was investigated using linear elastic static analysis and linear dynamic analysis procedures suggested in the guidelines. The results showed that in accordance with the GSA guideline the moment frame designed only for gravity load turned out to be vulnerable to the progressive collapse, whereas the lateral load resisting frame designed for earthquake load satisfied the criteria for progressive collapse. However both systems sailed to satisfy the criteria of the DoD-2005 guideline.

Likelihood Approximation of Diffusion Models through Approximating Brownian Bridge (브라운다리 근사를 통한 확산모형의 우도 근사법)

  • Lee, Eun-kyung;Sim, Songyong;Lee, Yoon Dong
    • The Korean Journal of Applied Statistics
    • /
    • v.28 no.5
    • /
    • pp.895-906
    • /
    • 2015
  • Diffusion is a mathematical tool to explain the fluctuation of financial assets and the movement of particles in a micro time scale. There are ongoing statistical trials to develop an estimation method for diffusion models based on likelihood. When we estimate diffusion models by applying the maximum likelihood estimation method on data observed at discrete time points, we need to know the transition density of the diffusion. In order to approximate the transition densities of diffusion models, we suggests the method to approximate the path integral of the random process with normal random variables, and compare the numerical properties of the method with other approximation methods.

Object Tracking And Elimination Using Lod Edge Maps Generated from Modified Canny Edge Maps (수정된 캐니 에지 맵으로부터 만들어진 LOD 에지 맵을 이용한 물체 추적 및 소거)

  • Park, Ji-Hun;Jang, Yung-Dae;Lee, Dong-Hun;Lee, Jong-Kwan;Ham, Mi-Ok
    • The KIPS Transactions:PartB
    • /
    • v.14B no.3 s.113
    • /
    • pp.171-182
    • /
    • 2007
  • We propose a simple method for tracking a nonparameterized subject contour in a single video stream with a moving camera and changing background. Then we present a method to eliminate the tracked contour object by replacing with the background scene we get from other frame. First we track the object using LOD (Level-of-Detail) canny edge maps, then we generate background of each image frame and replace the tracked object in a scene by a background image from other frame that is not occluded by the tracked object. Our tracking method is based on level-of-detail (LOD) modified Canny edge maps and graph-based routing operations on the LOD maps. We get more edge pixels along LOD hierarchy. Our accurate tracking is based on reducing effects from irrelevant edges by selecting the stronger edge pixels, thereby relying on the current frame edge pixel as much as possible. The first frame background scene is determined by camera motion, camera movement between two image frames, and other background scenes are computed from the previous background scenes. The computed background scenes are used to eliminate the tracked object from the scene. In order to remove the tracked object, we generate approximated background for the first frame. Background images for subsequent frames are based on the first frame background or previous frame images. This approach is based on computing camera motion. Our experimental results show that our method works nice for moderate camera movement with small object shape changes.

Complementary and Alternative Medical Therapies in Children and Adolescent with Chronic Disease : Utilizations and Patterns (만성 질환을 가진 소아, 청소년에게 시행되는 보완대체요법의 실태 연구)

  • Kim, Young Bin;Song, Jun Ho;Jang, Myoung Wan;Yoo, Hwang Jae;Kim, Cheol Hong;Lee, Hyun Hee
    • Clinical and Experimental Pediatrics
    • /
    • v.48 no.9
    • /
    • pp.929-934
    • /
    • 2005
  • Purpose : This study describes how often complementary and alternative medical(CAM) therapies, what patterns of CAM therapies utilization, what types of CAM therapies and why CAM therapies are used in children and adolescent with chronic disease. Methods : We interviewed and filled out questionnaires with parents of patients suffering from asthma, atopic dermatitis, congenital myopathy, epilepsy and so on from Mar 2004 to Aug 2004. Results : Two hundred fifty two parents answered questionnaires; 160 cases(63.5 percent) had used CAM therapies. Utilization of CAM therapies according to each chronic disease was as follows : congenital myopathy(100 percent), atopic dermatitis(91.1 percent), asthma(72.5 percent), chronic diarrhea (50.0 percent), epilepsy(17.1 percent) etc. Types of CAM therapy were as follows : dietary supplement (31.1 percent), herb medicine(23.4 percent), massage(14.2 percent), acupuncture(4.6 percent) etc. Sixty four(40.0 percent) case underwent more than two types of CAM therapies simultaneously. One hundred thirty three(83.1 percent) case were asked through non-medical prescription. Ninety nine(61.9 percent) case were recognized positive effect of CAM therapies. Parents' and childrens' ages were influential factors in CAM therapies utilization : the older the parents and the younger the children, the higher the utilization. Conclusion : Although patients receive treatment with western medicine, many of them not only undergo CAM therapies, especially more than two types, but also recognize the positive effects of CAM therapies. As a result, we suggest that it is easy to use of CAM therapies, and the positive effects of CAM therapies are prominent, domestically. Therefore, medical approach and study about the effectiveness and side effects of CAM therapies is necessary to avoid the imprudent use of such therapies.

Analysis on Hydrometeorological Components over Asia under Global Warming (지구온난화에 따른 아시아 지역의 수문기상성분 분석)

  • Kim, Jeong-Bae;Bae, Deg-Hyo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.327-327
    • /
    • 2022
  • 지구온난화로 전 세계는 기후위기에 직면해있다. 특히, 아시아의 경우 복사강제력과 대규모 대기순환인 몬순이 지역기후에 영향을 주기 때문에 지리적 위치 및 계절에 따라 폭염, 홍수, 가뭄 등 다양한 기상이변 및 수재해 문제를 겪고 있다. 더욱이, 아시아 지역은 온난화가 심화됨에 따라 식량 및 물 안보위기가 더욱 증가할 것으로 전망됨에 따라 이와 직결되는 기후 및 수문특성에 대한 기후변화 영향평가 및 분석이 요구된다. 본 연구에서는 미래 기온상승 조건을 고려하여 아시아 지역의 기후특성을 전망하고, 수문모형(VIC)을 활용하여 수문전망을 수행하였다. 미래 기후전망을 위해 적정 CMIP6 기후모델과 공통사회경제경로(SSP5-8.5) 시나리오를 활용하였다. 시나리오로부터 산출된 기온자료 및 CPC (Climate Prediction Center) 전 지구 관측 기온자료를 활용하여 산업화 이전 대비 잠재적인 전지구 기온상승(1.5℃~5.0℃) 조건을 추정하였다. 통계적상세화 기법을 적용하여 아시아 지역에 대하여 기후변화 시나리오를 상세화하고, 기후구분법을 적용하여 기후대를 구분하였다. 미래 기온상승 조건 하에서 아시아 지역의 기후특성을 전망하고 기후대의 분포변화를 분석하였다. 전 지구 기온이 상승함에 따라 지역별 기후특성이 변화하였으며, 이는 기온 및 강수량 변화에 기인하는 것으로 분석되었다. 최고 및 최저기온은 모든 기후대의 전 지역에서 상승하며, 이는 평균적으로 전 지구 평균 기온을 상회하였다. 강수량 및 강수일수는 대체로 증가하였으나, 기후특성에 따라 지역별 편차를 보였다. 기상성분의 변화로 기후대별 수문성분(증발산량, 유출량)은 대체로 증가하였으며, 극한 유출량의 변화경향은 모든 기후대에서 증가할 것으로 전망되었다. 지속적인 지구온난화는 아시아 지역의 수문순환은 가속화할 것으로 전망되며, 기후대별 수문기상성분의 변화는 지역의 기후특성에 따라 편차가 있는 것으로 분석되었다. 지구온난화 조건별 아시아 지역의 미래 기후 및 수문기상성분 변화 특성은 기상 및 수자원에 대한 기후변화 영향평가 시 기초자료로 활용될 수 있다.

  • PDF

An Incident-Responsive Dynamic Control Model for Urban Freeway Corridor (도시고속도로축의 유고감응 동적제어모형의 구축)

  • 유병석;박창호;전경수;김동선
    • Journal of Korean Society of Transportation
    • /
    • v.17 no.4
    • /
    • pp.59-69
    • /
    • 1999
  • A Freeway corridor is a network consisting of a few Primary longitudinal roadways (freeway or major arterial) carrying a major traffic movement with interconnecting roads which offer the motorist alternative paths to his/her destination. Control measures introduced to ameliorate traffic performance in freeway corridors typically include ramp metering at the freeway entrances, and signal control at each intersections. During a severe freeway incident, on-ramp metering usually is not adequate to relieve congestion effectively. Diverting some traffic to the Parallel surface street to make full use of available corridor capacity will be necessary. This is the purpose of the traffic management system. So, an integrated traffic control scheme should include three elements. (a)on-ramp metering, (b)off-ramp diversion and (c)signal timing at surface street intersections. The purpose of this study is to develop an integrated optimal control model in a freeway corridor. By approximating the flow-density relation with a two-segment linear function. the nonlinear optimal control problem can be simplified into a set of Piecewise linear programming models. The formulated optimal-control Problem can be solved in real time using common linear program. In this study, program MPL(ver 4.0) is used to solve the formulated optimal-control problem. Simulation results with TSIS(ver 4.01) for a sample network have demonstrated the merits of the Proposed model and a1gorithm.

  • PDF

An Evaluation of Blast Resistance Performance of RC Columns According to the Shape of Cross Section (단면의 형상에 따른 철근콘크리트 기둥의 폭발저항 성능 평가)

  • Kim, Han-Soo;Park, Jae-Pyo
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.23 no.4
    • /
    • pp.387-394
    • /
    • 2010
  • The alternative load path method based on a column removal scenario has been commonly used to protect building structures from being progressively collapsed due to probable blast loading. However, this method yields highly conservative result when the columns still have substantial load resisting capacity after blast. In this study, the behavior of RC columns with rectangular and circular sections under the blast loading was investigated and the remaining capacity of the partially damaged columns was compared. AUTODYN which is a hydrocode for the analysis of the structure on the impact and blast loading was used for this study. The blast loading was verified with the experiment results. The analysis results showed that the circular columns are preferable to the rectangular ones in respect of the blast resistance performance.

유연성 투명전도막의 전기적 특성에 미치는 CNT 길이의 영향

  • Sin, Ui-Cheol;Jeong, Gu-Hwan
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.456-456
    • /
    • 2011
  • 최근 차세대 디스플레이, 터치스크린, 전자파 차폐 및 흡수 등의 다양한 응용분야에 적합한 소재를 개발하기 위한 연구가 진행되고 있다. 현재 주로 사용되는 ITO박막은 희소원소인 인듐의 매장량 한계와 높은 비용이 문제시 되고 있기 때문에, 대체 재료의 개발이 시급하게 요구되고 있다. 탄소나노튜브(CNT)는 금속을 능가하는 이론적인 전기전도도를 갖고 있으며 높은 탄성등의 우수한 기계적 성질을 갖고 있어 다양한 차세대 응용에 있어서 최적의 재료로 주목을 받고 있다. 특히, CNT 기반의 투명전도막은 기존의 ITO 박막 보다 우수한 유연성이 기대되어 더욱 기대를 모으고 있다. 본 연구에서는, 최종 고순도 재료를 얻기까지 합성 및 정제에 많은 공정과 시간이 요구되는 고가의 단층벽 나노튜브(SWNT)를 이용하지 않고, 웨이퍼 기판 위에 수직배향 합성한 상태의 다층벽 나노튜브(MWNT)를 별도의 정제과정 없이 초음파 분산한 뒤, 스프레이 코팅법을 이용하여 고분자 기판 위에 투명전도막을 제작하였고, 이때 각기 다른 길이의 수직배향 MWNT를 이용하여 유연성 투명전도막의 전기적 특성에 미치는 MWNT 길이의 영향에 대해 알아보았다. MWNT는 아세틸렌가스를 이용하여 열CVD법으로 합성하였고, 합성시간을 제어함으로써 길이가 다른 MWNT를 얻을 수 있었다. 투명전도막 제조공정의 단순화를 위하여 이용한 MWNT의 초음파 분산 결과, $500{\mu}m$ 이하 길이의 MWNT에서 분산성이 현저히 빨라지는 것을 확인하였다. 한편, 제작한 MWNT 기반의 유연성 투명전도막은 원자간힘현미경 및 면저항 측정기를 이용하여 막 두께에 따른 면저항 특성을 조사하였다. 그 결과 응용 가능한 면저항을 갖는 MWNT 투명전도막의 두께는 최소 50 nm 이상이어야 함을 알았고, 특히 MWNT등의 접촉점(node) 수에 따른 접촉저항 및 전기전도경로(electric conductivity path)를 고려했을 때 최적의 MWNT 길이가 존재하는 것을 확인하였다.

  • PDF