• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.19-26
• /
• 2003

In the face of the deterioration of tobacco manufacturing plant, we've got the plan for now manufacturing factory for the competitiveness, modernization, rationalization and environment. To achieve the goals, it was necessary to plan and investigate in the early stage of project. Consequently. We determined to introduce the CM in the early stage. We Performed the whole phase of CM services front the pre design phase services like feasibility analysis of site and building, plant master plan, selection of manufacturing facilities and drawing up the RFP, to maintenance management phase after the completion of a construction work. Contrary to the another CM projects, YongJu New Tobacco Manufacturing Plant CM organized the CM team with expert in field before the design development. This study analyze and evaluate the CM services of YongJu project which performed on the pre design phase. The purpose of this study is to emphasize the importance of pre design phase CM and support that CM services will start from the pre design phase.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.133-141
• /
• 2010

Grounding system insures a reference potential point for electric devices and also provides a low impedance path for fault currents in the earth. The ground impedance as function of frequency is necessary for determining its performance since fault currents could contain a wide range of frequencies. Copper and concrete rod electrodes are the most commonly used grounding electrode in electric distribution systems. In this paper, the ground impedance of copper and concrete rods has been measured by frequency and time domain characteristic tests. An equivalent transfer function model of the ground impedance is identified from the measured values by using ARMA method and evaluated by comparing conventional grounding impedances.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.9-15
• /
• 2010

Grounding insures a reference potential point for electric devices and also provides a law resistance path for fault or transient currents in the earth. The grounding impedance as a function of frequency is necessary for determining its performance since fault or transient currents could contain a wide range of frequencies. A concrete rod electrode is one of the commonly used grounding electrodes in electric distribution systems. In this paper, the grounding impedance of concrete rods has been measured in frequency raging from 60[Hz] up to 100[kHz] and an equivalent model of the grounding impedance is identified from the measured values. The grounding impedance under study when a typical lightning surge is injected into the grounding system was simulated numerically and graphically through the use of the EDSA software program.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.641-644
• /
• 2003

Sea level variability and eddy in the Amsterdam-Crozet-Kerguelen region of the South Indian Ocean were studied during 1 year(October 15, 1992~October 15, 1993) using multi-satellite data(Topex/Poseidon, ERSl) produced by signal treatement. We found that generally sea level variabilities(>10cm) exist along the Antarctic Circumpolar Current in the area of 35$^{\circ}$~46$^{\circ}$S and especially strong sea level variabilities(20~30cm) were occurred by the effects of eddy due to botton topography in two small area: 49$^{\circ}$-57$^{\circ}$E and 38$^{\circ}$~42$^{\circ}$S, and 58$^{\circ}$ -64$^{\circ}$E and 42$^{\circ}$-44$^{\circ}$S.

• Journal of the Korean Society for information Management
• /
• v.33 no.4
• /
• pp.77-101
• /
• 2016

Recently, attention has been drawn to a new form of a public library, that is, a public library in a complex facility constructed in the same building or site with another facility. To get active users' or local governments' supports in the public library in a complex facility, it is necessary to build library strategic plans based on the analysis of users' evaluation and demands. Thus, this study analyzed the user satisfaction and perception of the 28 public libraries in complex facilities in Seoul. As a result, it was found that most users overall satisfied with public libraries in complex facilities in terms of human resources, information resources, and the links among services and positively perceived their environments and services. In order to provide more satisfaction to the users in public libraries in complex facilities first, it is necessary to improve the accessibility of libraries, to secure the sufficient library space, to prevent the outside noise, to link the facilities which bring mutual synergistic effect, and to develop a program and service accompanying other facilities.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.10
• /
• pp.82-88
• /
• 2014

This paper presents the results of model tests for the attachment process of lightning leader to ground which is one of poorly understood processes of cloud-to-ground lightning discharges. In order to simulate the attachment process of lightning leader to ground, we investigated the discharge characteristics of air gap between the tip of needle-shaped electrode and the soil surface as a parameter of moisture content in soils when the positive and negative $1.2/50{\mu}s$ lightning impulse voltages are applied. The breakdown voltage and the discharge light were observed. As a result, the attachment processes of lightning leader to ground are strongly dependent on the grain size and the moisture content of soils. The time to breakdown was shortened with increasing the magnitude of incident impulse voltages. The delay time from application of the highest voltage to breakdown in sand is shortened with increasing the moisture content. The delay time from application of the voltage to breakdown in gravel varied from about $0.5{\mu}s$ to several ${\mu}s$. As the moisture content in soil increases, the breakdown voltages are decreased and the breakdown voltage versus time to breakdown curves are shifted toward the lower side. The results obtained in this work are similar to those for non-uniform air gap stressed by lightning impulse voltages.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.8
• /
• pp.26-32
• /
• 2009

Grounding insures a reference potential point for electric devices and also provides a law resistance path for fault or transient currents in the earth. The ground impedance as a function of frequency is necessary for determining its performance since fault or transient currents could contain a wide range of frequencies. A copper rod electrode is the most commonly used grounding electrode in electric distribution systems. In this paper, the grounding impedance of copper rods has been measured in frequency raging from 60[Hz] up to 100 [kHz] and an equivalent model of the grounding impedance is identified from the measured values. The grounding impedance under study when a typical lightning surge is injected into the grounding system was simulated numerically and graphically through the use of the EDSA software program.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.143-150
• /
• 2009

The bar-shaped electrode is very popular in earth construction for its easy obtainments of the regulative grounding resistance values on power distribution systems in many countries. For these reason, a lots of researches are being proceeded on its deformation and materials. But the grounding construction has limit for improvement the grounding resistance characteristics not only by the improvement of the driven electrode, because that the grounding characteristics are very sensitive to soils(hard, soft). This study is about the construction methods on which the driven electrode can be serially or parallely connected using by hollow screw rod for obtaining the regulative grounding resistance values. The experimental results show that the grounding resistance values are reduced more than 30[%] comparing with the other construction methods under the same conditions(earth resistance, numbers of driven electrode, construction method of serial and parallel, chemicals for reducing grounding resistance, water).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.509-517
• /
• 2011

Recently, large scale of the damage from the natural disasters are occurring frequently such as Japanese and New Zealand's earthquake. Collecting information quickly and accurately from damaged area is important for effective react in emergency situations. UAV is effective method to collect information because it can fly low attitude and spend small operational costs/time. In this study, collecting data about the UAV regulations are analyzed for effective UAV operation in disaster detection. And Improvement of Regulations were proposed about Problem of UAV Operation. Regulation of UAV for disaster detecting is not exist. But It's possible to classify into Ultra Light Plane. So addition of some clauses like definition, scope and air-borne equipment for UAV will be needed. Also, it is difficult to manage effectively because of process about flight permission, therefore it is need to enact exceptional regulations to solve this problem. More analytical research based on applications of UAV operation for disaster detection will be present improvement of disaster detection and damage investigation.

• Journal of Korean Medical classics
• /
• v.18 no.4 s.31
• /
• pp.27-43
• /
• 2005

통과대(通過對)${\ulcorner}$내경(內經)${\lrcorner}$ 중출현적조신적개념급용조신치병적방법적연구(中出現的調神的槪念及用調神治病的方法的硏究), 득출여하결론(得出如下結論): 조신이양생지의(調神以養生之意), 용우지금(用于至今). ${\ulcorner}$내경(內經)${\lrcorner}$중신지의(中神之意), 우기표현위여우주자연지신(尤其表現爲與宇宙自然之神)[천신(天神)]상응적인체지신(相應的人體之神)[인신(人神)]상(上), 즉천인상응적사상교위돌출(卽天人相應的思想較爲突出) 형신상호관계상(形神相互關係上), 재유지형신합일적사상적동시(在維持形神合一的思想的同時), 비기양형경가중시어조신(比起養形更加重視於調神). 재양생방면(在養生方面), 조신의조시간급공간(調神依照時間及空間), 분위사시조신화오장신조신(分爲四時調神和五臟神調神). ${\ulcorner}$소문(素問).사기조신대론(四氣調神大論)${\lrcorner}$적요지시이사시출현적자연계적변화규율(的要旨是以四時出現的自然界的變化規律), 응대청정적우주정신래수련신심(應對淸靜的宇宙精神來修練身心). ‘이념요법(移念療法)’시통과개변재인체오장내정기적운행위치(是通過改變在人體五臟內精氣的運行位置), 진행치료적방법(進行治療的方法). 기내용개괄료기타각종정신요법(其內容槪括了其他各種精神療法). 대지언고론요법적한의학해석(對至言高論療法的韓醫學解釋), 불시이이유오행혹음양이론작위의거(不是以已有五行或陰陽理論作爲依據), 이시가종사상의학중조도. 기원인시사상의학적출발점(其原因是四象醫學的出發點), 불시이단순적육체무병작위기목적(不是以單純的肉體無病作爲其目的). 저일점(這一點), 종명확지표현재수세보원적성명사단론중(從明確地表現在壽世保元的性命四端論中). 대생리병리독특적유심론관(對生理病理獨特的唯心論觀), 시이제마선생탁월관점(是李濟馬先生卓越觀点). 한방음악치료초월료이행동주의심리학위중심(韓方音樂治療超越了以行動主義心理學爲中心), 발전기래적기유적음악요법적국한성(發展起來的旣有的音樂療法的局限性), 약여약물(若與藥物), 침구치료병용(鍼灸治療倂用), 불근가이치료신경정신질환(不僅可以治療神經精神疾患), 환가이치료기타각종신체질환(還可以治療其他各種身體疾患). 기공시이응신(氣功是以凝神), 의수(意守), 의념등표현(意念等表現), 작위기주요조신방법적일종수신법(作爲其主要調神方法的一種修身法).