• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2279-2284
• /
• 2017

Recent wireless communications using the unlicensed band have been on the rise and the range of use is increasing. The license-exempted band is a prerequisite for accepting interference between telecommunication equipment. In particular, the interference phenomenon of Bluetooth, wireless LAN, and RFID (Radio Frequency Identification) using the 2.4 GHz band is getting serious. In such urban areas, the wireless transmission medium may be in a bad state. There are roughly two ways to make effective transmission in this environment. The first is the IEEE 802.11 RTS / CTS method and the second is the frame fragmentation method. In this paper, it is difficult to transmit a frame over a certain size in a jamming environment due to the interference of the wireless environment. In this environment, we implement a frame division transmission scheme that guarantees effective transmission and reliability by dividing a frame into smaller units in order to perform reliability transmission and efficient transmission.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.92-96
• /
• 2011

In this paper, we present a bandpass filter (BPF) based on composite right-/left-handed (CRLH) structure for improving the linearity of the power amplifier. The proposed BPF consist of the inter-digit signal line on the top plane and the complementary split ring resonator (CSRR) on the bottom plane, respectively. The insertion loss is minimized at operation frequency and the 2nd harmonic is suppressed by the bandpass filter using the CRLH structure, respectively. The output power of 33 dBm, the 2nd harmonic of -53.527 dBc, 3rd inter-modulation distortion of -36.16 dBc was obtained at 2.14 GHz, respectively. Compared with the reference power amplifier, the 2nd harmonic of 16 dB and 3rd inter-modulation distortion of 12 dB have been improved at 2.14 GHz, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.323-323
• /
• 2014

기존의 태양전지 기술은 기술 장벽이 매우 낮고 대량 생산을 통한 단가 절감하는 구조를 가지고 있어 대규모 자본을 가진 후발 기업에게 잠식되기 쉽다. 그러나, III-V족 화합물 반도체를 이용한 집광형 고효율 태양전지는 기술 장벽이 매우 높은 기술 집약 산업이므로 독자적인 기술을 확보하게 되면 독점적인 시장을 확보 할 수 있어 미래 고부가 가치 산업으로 적합하다. 특히 III-V족 화합물 반도체 태양전지는 III족 원소(In, Ga, Al)와 V족 원소(As, P)의 조합으로 0.3 eV~2.5 eV까지 밴드갭을 가지는 다양한 박막 제조가 가능하여 다양한 흡수 대역을 가지는 태양전지 제조가 가능하기 때문에 다중 접합 태양전지 제작이 가능하다. 또한 III-V 화합물 반도체는 고온 특성이 우수하여 온도 안정성 및 신뢰성이 우수하고, 또한 집광 시 효율이 상승하는 특성이 있어 고배율 집광형 태양광 발전 시스템에 가장 적합하다. Si 태양전지의 경우 100배 이하의 집광에서 사용하나, III-V 화합물 반도체 태양전지의 경우 500~1000배 정도의 고집광이 가능하다. 이러한 특성으로 III-V 화합물 반도체 태양전지 모듈 가격을 낮출 수 있고, 따라서 Si 태양전지 시스템과 비교하여 발전 단가 면에서 경쟁력을 확보할 수 있다. III-V 화합물 반도체는 다양한 밴드갭 에너지를 가지는 박막 제조가 용이하고, 직접천이(direct bandgap) 구조를 가지고 있어 실리콘에 비해 광 흡수율이 높다. 또한 터널정션(tunnel junction)을 이용하면 광학적 손실과 전기적 소실을 최소화 하면서 다양한 밴드갭을 가지는 태양전지를 직렬 연결이 가능하여 한 번의 박막 증착 공정으로 넓은 흡수대역을 가지며 효율이 높은 다중접합 태양전지 제작이 가능하다. 이에 걸맞게 본연구에서는 화학기상증착장치(MOCVD)를 이용하여 InAsP 나노선을 코어 쉘 구조로 성장하여 태양전지를 제작하였다. P-type Dopant로는 Disilane (Si2H6)을 전구체로 사용하였다. 또한 Benzocyclobutene (BCB) 폴리머를 이용하여 Dielectric을 형성하였고 Sputtering 방법으로 증착한 ZnO을 투명 전극으로 사용하여 나노선 끝부분과 실리콘 기판에 메탈 전극을 형성하였다. 이를 통해 제작한 태양전지는 솔라시뮬레이터로 측정했을때 최고 7%에 달하는 변환효율을 나타내었다.

• Journal of Information Management
• /
• v.28 no.3
• /
• pp.46-73
• /
• 1997

In these days, there are many studies to improve the effectiveness of retrieval systems. One method is to use thesaurus in the systems. But the establishment of the saurus independently is very difficult and requiers a great deal of time and labor. The goal of this research is to examine which problems there are. The texts used in the thesis were "Thesaurus of ERIC descriptors(7th ed.1977)" and "KEID Thesaurus(1981)" established by translation. The results of the thesis were as follows, First, there were many differences of equivalence classes of terms between English and Korean. Second, the errors of translation made words inadequate to use as a descriptors. Third, because of differences of traditions, thought and culture, associative relationship and hierarchical relation did not coincide between terns, Fourth, because the terms of the thesaurus of ERIC descriptors serve Western usages, the terms used in Korea were not or insufficient. So it way necessary to add our own therms. As mentioned above, translating a thesaurus for use as a documentation language for indexing and retrieval is not the optimum way of building up a thesaurus.

• Electronics and Telecommunications Trends
• /
• v.26 no.6
• /
• pp.129-138
• /
• 2011

미래의 고속 및 광대역 서비스에 대한 수요 증가로, 부족한 스펙트럼을 효율적으로 사용할 수 있는 스펙트럼 관리(spectrum management) 방법의 중요성이 대두되고 있다. 또한, 트래픽 폭증 및 멀티미디어 제공 등 서비스 확대에 대응할 수 있는 유연한 스펙트럼 접속(spectrum access) 기술, 공유(sharing)에 대한 필요성도 증대되고 있다. 이러한 중요성 및 필요성에 기인해, 효율적으로 스펙트럼을 공유할 수 있는 방법으로 언더레이, 오버레이 방식 등이 제안되었고, UWB 및 인지무선(cognitive radio)과 같은 공유 기술 등이 발전하게 되었다. 본 고에서는 효율적 주파수 이용을 위한 스펙트럼 관리 방법 및 주파수 공유 기술로 기존의 주파수 대역에서 충분히 낮은 출력으로 전파를 송출하는 언더레이 방식, 기회주의적인 오버레이 동적접속 기술, 면허권자인 1차 우선 사용자(primary user)와 2차 면허권자(secondary user) 간의 동적접속 기술에 대한 국내 외 기술동향을 상세히 소개하고자 한다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.7
• /
• pp.1-8
• /
• 2012

In this paper, we consider an efficient protocol for the multi-hop relay transmission on a sensor network which can be utilized in a ubiquitous environment. More specifically, we propose an efficient relaying protocol for the distance and position recognition on the proposed sensor network which performs with the differentially bi-orthogonal chirp spread spectrum (DBO-CSS) in the industrial, scientific and medical (ISM) bands. For an efficient networking access, we design and implement four different packet structures, zone information packet, hop information packet, tag information packet, and application serial packet. Additionally, we also propose an efficient position recognition algorithm. Finally, for verification of our proposed protocol's efficiency, we build the testbed system which consists of $15m{\times}15m$ multi-cell and 10 hops in the network.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.685-688
• /
• 2000

본 논문에서는 슬라이스간의 상관성을 이용한 3차원 MR 영상의 효율적인 압축방법을 제안한다. 제안한 알고리즘은 웨이브릿 변환영역에서 동영상 압축에 사용되는 움직임 보상 부호화와 프랙탈 부호화를 이용한다. 제안한 방법에서는 먼저 영상을 웨이브릿 변환한 후, 공간영역에서 같은 위치에 있는 웨이브릿 계수들을 모아서 일정한 크기를 갖는 웨이브릿 블록으로 재배열한다. 배열된 웨이브릿 블록에 대해 움직임 추정을 하고 블록간의 상관성이 크다고 판단되는 블록에 대해서는 움직임 추정 정보만 이용한다. 그러나 상관성이 작다고 판단되는 블록의 경우에는 최상위 계층의 저주파 부대역에 대해서만 움직임 추정을 하고 나머지 대역에 대해서는 프랙탈 부호화를 실행한다. 그리고 움직임 벡터와 프랙탈 부호화에 의해 복원된 슬라이스와 현재 슬라이스의 차인 오차 영상은 SPIHT로 부호화한다. 제안한 방법을 낮은 비트율에서 실험한 결과, 2차원 SPIHT에 비해 향상된 PSNR을 나타낼 뿐만 아니라 블러링이 줄어들어 객관적, 주관적 화질에서 우수하게 나타난다.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.122-139
• /
• 2015

Though the digital transition of terrestrial TV has been completed, the transmission system for terrestrial radio has not been determined and terrestrial radio still keeps its analog transmission. This study, under coorientation model, aims to explore the cognitive difference in recognizing important factors to be considered in deciding the digital radio transmission system between the employees of terrestrial broadcasters and then crucial issues related to the factors are driven. It has been found that the most big cognitive difference among the employees of three major terrestrial broadcasters lies in selecting frequency band for digital radio transmission. But there was little difference of opinion on simultaneous production-transmission, efficiency of frequency usage, broadcast quality and standards of service. The most disputable point in transition to digital radio broadcasting is selecting the frequency band for digital radio between the frequency bands used for FM radio broadcast (88-108MHz), terrestrial DMB (VHF Ch7~13) and FM radio adjacent broadcast band (76~88MHz: VHF Ch5~6). So, the question concludes into the selection issue between DAB+, HD-Radio, and DRM+. To improve the quality of radio broadcasting service and enhance the satisfaction of listeners, it is desirable to allow to operate both production system and transmission station, to enhance high transmission efficiency with minimum transmission facility, and to permit new entrance of broadcasters.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.22-28
• /
• 2007

Spectrum spreading, in its general form, can be conceived as an artificial expansion of the signal bandwidth with respect to the minimum Nyquist band required to transmit the desired information. Spreading can be functional to several objectives, including resilience to interference and jammers and reduction of power spectral density levels. In the paper, signal spreading is manly used for increasing the received energy, thus satisfying link budget constraints, for terminals with low aperture antennas, without increasing the transmitted EIRP. As a matter of fact, in many mobile scenarios, even when MODCOD configurations with very low spectral efficiency (i.e. QPSK-1/4) in DVB-S2 standard, are used, the link budget cannot be closed. Spectrum spreading has been recently proposed as a technique to improve system performance without introducing additional MODCOD configurations under the constraint of fixed power spectrum density level at the transmitter side. To this aim, the design of spectrum spreading techniques shall keep into consideration requirements such as spectrum mask, physical layer performance, link budget, hardware reuse, robustness, complexity, and backward compliance with existing commercial equipments. The proposed implementation allows to fully reuse the standard DVB-S2 circuitry and is inserted as an 'inner layer' in the standard DVB-S2 chain.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1573-1579
• /
• 2010

In this paper, we studied efficient design of wireless transmission system for unified data transmission in a subway and railway. It is increased that need of broadband multimedia service to make useful environment for users and to support the operation of railway system. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. And more bandwidth makes received antenna sensitivity bad. So it needs more wireless stations. We deduced best bandwidth for subway wireless transmission system using the cost of installation and efficiency of system. Consequently, we proposed efficient service model for broadband wireless system at a subway. Subway broadband wireless transmission system is testing and extended to province subway. The cost of subway broadband wireless transmission system is saved, because the system can be efficiently designed using proposed service model. Therefore, the effectiveness of it will be expected to be very big.