• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.75-80
• /
• 2013

In this paper, the Ka-band maritime satellite communication systems for mobile terminals are proposed. The design includes the link budget analysis, determination of modulation and coding schemes and the overall structure of a transmitter. To avoid the harmful effects on the existing DVB-S2 services, the proposed maritime satellite system using the same spectrum with DVB-S2 at the same time employs the very wideband spreading transmission. Additionally, omni-directional low-gain antennas should be equipped in a mobile terminal to reduce the system cost. These two considerations limit the maximum transmission rate of the proposed system. Due to the limitations, the proposed system includes 36 dB or 39 dB spreading gain depending on the modulation scheme and a link-adaptive repetition method depending on the level of rain attenuation. To support short packets with minimal performance loss, the turbo code used in 3GPP instead of LDPC(low density parity check code) is adopted. By combining them, the overall structure of low-rate maritime satellite communication system is designed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1124-1131
• /
• 2014

The chirp spread spectrum (CSS) technique that transmits data signal by using a chirp signal is often used for maritime wireless communication systems such as sound detection radar systems for submarines. However, maritime multipath environment could reduce the data rate of the CSS system. To tackle the problem, an overlap-based CSS transmission scheme is proposed and analyzed in this paper: Based on the approximated Gaussian Q function, we derive a closed form expression of the bit error rate (BER) of the proposed overlap-based CSS system and investigate the mathematical relationship between the number of overlaps and the intersymbol interference (ISI).

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.22-28
• /
• 2007

Spectrum spreading, in its general form, can be conceived as an artificial expansion of the signal bandwidth with respect to the minimum Nyquist band required to transmit the desired information. Spreading can be functional to several objectives, including resilience to interference and jammers and reduction of power spectral density levels. In the paper, signal spreading is manly used for increasing the received energy, thus satisfying link budget constraints, for terminals with low aperture antennas, without increasing the transmitted EIRP. As a matter of fact, in many mobile scenarios, even when MODCOD configurations with very low spectral efficiency (i.e. QPSK-1/4) in DVB-S2 standard, are used, the link budget cannot be closed. Spectrum spreading has been recently proposed as a technique to improve system performance without introducing additional MODCOD configurations under the constraint of fixed power spectrum density level at the transmitter side. To this aim, the design of spectrum spreading techniques shall keep into consideration requirements such as spectrum mask, physical layer performance, link budget, hardware reuse, robustness, complexity, and backward compliance with existing commercial equipments. The proposed implementation allows to fully reuse the standard DVB-S2 circuitry and is inserted as an 'inner layer' in the standard DVB-S2 chain.

• Journal of Satellite, Information and Communications
• /
• v.4 no.2
• /
• pp.39-45
• /
• 2009

This paper proposes the specific code synchronization technique for DS-SS(Direct Sequence-Spread Spectrum transmission in the DVB-RCS +M standard. DS-SS is better than multi-carrier transmission method under nonlinear channel but imposes a long acquisition time. To improve the synchronization aspect, the robust correlation structure is introduced for acquisition and the nonlinear delay lock loop is done for tracking. MAT(Mean Acquisition Time) performances is shown to validate its superiority. In addition, code tracking and jitter performances are done when code tracking algorithm based on 2 oversamples which is not influenced by sampling clock timing offset and carrier freq. offset is used.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.263-269
• /
• 2012

Code-Division Multiple-Access(CDMA) allows several users simultaneous access to a common channel by assigning a distinct pseudonoise sequence called spectrum code to each user. Each user in a CDMA system uses a assigned spectrum code to modulate their signal. Choosing the codes used to modulate the signal is very important in the performance of CDMA systems. The best performance will occur when there is good separation between the signal of a desired user and the signals of other users. The receiver synchronizes the code to recover the data. The use of an independent code allows multiple users to access the same frequency band at the same time. In this paper we propose a generalized model of non-linear binary sequence using trace function and analyze cross-correlation of these sequences. These sequences with low correlation, large linear span and large family size, in a direct-sequence spread spectrum communication system, help to minimize multiple access interference, increase security degree of system and enlarge user number.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.128-133
• /
• 2010

We investigate the optimal chip rate of power or rate adapted direct-sequence code division multiple access (DS/CDMA) communication systems in Nakagami fading channels. We find that the optimal chip rate that maximizes the spectral efficiency depends upon both the channel parameters, such as multipath intensity profile (MIP) and line-of-sight (LOS) component, and the adaptation scheme itself. With the rate adaptation, the optimal chip rate is less than $1/T_m$, irrespective of the channel parameters, where $1/T_m$ is multipath delay spread. This indicates that with the rate adaptation, correlation receiver achieves higher spectral efficiency than RAKE receiver. With the power adaptation, however, the optimal chip rate and the corresponding number of tabs in RAKE receiver are sensitive to MIP and LOS component.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1665-1676
• /
• 2001

The effect of spreading gain control on the throughput of a CDMA slotted ALOHA system is considered. Mobile users transmit packets over a shared channel, and the packets transmitted in the same time slot over the shared channel act as simultaneous access interference (SAI). When using spread-spectrum signal, a CDMA slotted ALOHA channel achieves high probability of capture due to the property of high title resolution, and the bit rate of user information is determined by spreading gain. When the SAI level gets larger, the high value of spreading gain enhances the packet throughput by increasing the probability of a successful packet transmission, while it degrades the of the effective throughput by reducing the user information bits carried within a packer. To solve the problem, we investigated the effect of the capture probability and the SAI level on these system throughputs, and evaluated the throughput performance of the system for each spreading gain control scheme. The results showed that the maximum effective throughput could be achieved with an unified method despite the variation of the SAI level by deriving an optimal value of the spreading gain according to 171e system states.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.542-545
• /
• 2006

In recent years, RFID is widely used in Industrial applications including factory, material flow, logistics and defense areas. In this paper, we developed a RFID baseband system with ASK modulation and convolutional channel code. A commercial ASK RF module is used and its frequency range in $350\sim351MHz$ and power is 10mW and the convolution code is constraint length k=3 and rate R=1/2. The performance is measured by frame error rate and the convolutional code is very useful in performance improvement and, also we implemented the binary search algorithm as anti-collision method and we show the wave shapes whit collision occurrence. This RFID system is designed by FPGA therefore it produces result of speed-up and improvement of reliability.

• Electronics and Telecommunications Trends
• /
• v.32 no.3
• /
• pp.56-67
• /
• 2017

오랫동안 미개척 주파수 대역이었던 테라헤르츠 대역은 소자 및 시스템 기술 연구성과의 축적과 기술 성숙 과정을 거쳐, 최근 다수의 상용화 시스템이 출시되는 등 산업 분야에의 응용이 확산되었다. 특히, 투과 이미징이 가능한 테라헤르츠 이미징 시스템은 산업 분야에서 비접촉 비파괴 품질검사 분야 등에 많은 응용이 기대되고 있다. 이밖에 분광 기술에 기반을 둔 막 두께 측정 시스템, 초고속 통신 시스템 등도 향후 중요한 테라헤르츠 기술 응용 분야로 여겨지고 있다. 본고에서는 테라헤르츠 응용 기술에 관한 최근의 연구 동향을 간략히 살펴보고, 한국전자통신연구원 전파위성연구본부 테라헤르츠 창의원천연구실에서 주력해 온 포토닉스 기반 테라헤르츠 소자 및 시스템에 관해 상세히 소개한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.4B
• /
• pp.447-456
• /
• 2001

본 논문에서는 DS-확산대역 시스템에서 격자형 IIR 노치필터를 이용하여 협대역 간섭신호를 제거한다. 이를 위하여 우선 갑섭신호의 주파수와 파워가 격자형 IIR 노치필터에 의ㅏ형 추정된다. 그리고 또 다른 IIR 노치필터를 수긴기 닾에 위치시키고 노치의 위치가 추정된 갑섭신호의 주파수에 있도록 한다. 그러나 단워원 위에 영점이 존재하는 IIR 노치필터는 간섭신호 뿐만 아니라 노치부분의 신호 성분도 제거하므로 데이터의 왜곡이 발생하게 된다. 따라서 이러한 데이터의 왜곡을 줄이기 위해서 필터의 노치 깊이를 조절하는 알고리듬을 개발하였다. 이를 위해 노치필터 출력의 신호 대 잡음비를 필터 파라미터에 대한 식으로 유도하고 이를 최대로 하는 최적의 노치 깊이를 구하였다. 시뮬레이션 결과 제안한 알고리듬이 기존의 FIR 노치필터나 FIR LMS 알고리듬에 비해 좋은 성능을 갖는다는 것을 확인할 수 있다.