• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2C
• /
• pp.91-99
• /
• 2003

In this paper, We analyze performance of ZFE MUD receiver in DSSS unidirectional wireless transceiver operating in 2.4㎓ ISM band and indoor environment. This system has the shortcomings that many burst error is occurred because of long term deep fade experienced by some user and impossibility of power control. Therefore, the solution to this problem is important because the performance of DS-CDMA system is guaranteed under, the perfect power control. MUD receive. which improves the performance of this system is not required to perform rigorous power control and is able to remove MAI using linear equalization. From the result of performance comparison, we show that ZFE MUD receiver is more adequate for this system than other receivers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.542-545
• /
• 2006

In recent years, RFID is widely used in Industrial applications including factory, material flow, logistics and defense areas. In this paper, we developed a RFID baseband system with ASK modulation and convolutional channel code. A commercial ASK RF module is used and its frequency range in $350\sim351MHz$ and power is 10mW and the convolution code is constraint length k=3 and rate R=1/2. The performance is measured by frame error rate and the convolutional code is very useful in performance improvement and, also we implemented the binary search algorithm as anti-collision method and we show the wave shapes whit collision occurrence. This RFID system is designed by FPGA therefore it produces result of speed-up and improvement of reliability.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.569-572
• /
• 2000

본 논문에서는 DSSS(Direct Sequence Spread Spectrum)를 사용한 무선 감시용 카메라를 위한 모뎀을 제안한다 무선 환경에서 발생할 수 있는 여러 가지 간섭과 다중 경로에 의한 오류 발생 확률 등을 고려해야 하고 또한 여러 대의 카메라를 설치하고 각각의 카메라로부터의 신호를 선택적으로 모니터하기 위해 각각의 신호를 구분할 수 있는 변조 방식의 사용이 필요하다. 이를 위해 컴퓨터 모의 실험을 통한 성능 분석과 실제 FPGA설계 및 제작으로 이를 확인한다.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.75-80
• /
• 2013

In this paper, the Ka-band maritime satellite communication systems for mobile terminals are proposed. The design includes the link budget analysis, determination of modulation and coding schemes and the overall structure of a transmitter. To avoid the harmful effects on the existing DVB-S2 services, the proposed maritime satellite system using the same spectrum with DVB-S2 at the same time employs the very wideband spreading transmission. Additionally, omni-directional low-gain antennas should be equipped in a mobile terminal to reduce the system cost. These two considerations limit the maximum transmission rate of the proposed system. Due to the limitations, the proposed system includes 36 dB or 39 dB spreading gain depending on the modulation scheme and a link-adaptive repetition method depending on the level of rain attenuation. To support short packets with minimal performance loss, the turbo code used in 3GPP instead of LDPC(low density parity check code) is adopted. By combining them, the overall structure of low-rate maritime satellite communication system is designed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.12-22
• /
• 2012

The main drawback of the multi-code spread spectrum communication system, which spreads data bits stream by the multiplexed orthogonal codes, is the need for the highly linear amplifier. Several constant amplitude precoding schemes have been proposed for the Walsh code or the extended $m$-sequence based multi-code spread spectrum systems. In the constant amplitude spread spectrum systems the accompany code is transmitted together with orthogonal codes to maintain the transmitter output in a constant level. In this paper we propose the use of the accompany in the receiver to improve the BER performance. The proposed receiver has the capability to correct the code detection error(up to one code error). We carried out simulations to verify the validity of the proposed algorithm. BER performance improvement was noticed compared with the conventional receiver.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.7
• /
• pp.441-448
• /
• 2012

Spread spectrum provides the minimized inter-symbol interference, the low probability of intercept and the multiple access capability. This paper presents a direct sequence spread spectrum with carrier/timing recovery and equalizer which compensates the delay spread caused by multipath transmission. When the sea trials were performed in Korean East Sea, the bit error rates of QPSK and direct sequence spread spectrum are $1.46{\times}10^{-2}$ and $5.17{\times}10^{-4}$ at 3 km source-receiver range, respectively.

• Journal of Satellite, Information and Communications
• /
• v.2 no.1
• /
• pp.1-6
• /
• 2007

In this paper, we proposed new algorithm that improves the acquisition performance of the PN code searcher used in DS-CDMA systems. Using the mean deviation computed from the correlator output of the PN code searcher, it is possible to estimate received channel environment. To satisfy the required acquisition performance in estimated channel environment, the PN code searcher changes the correlator tap size adaptively. Proposed algorithm shows improved performance compared with conventional algorithm using the fixed correlator tap size.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.1-11
• /
• 2012

The multi-code spread spectrum communication system, which spreads data bit stream by multiplexing orthogonal codes, can transmit data in high rate. However it needs the high-cost good linear amplifier because of the multi-level output signal. In order to overcome this drawback several systems making the amplitude of output signal constant with Walsh codes have been proposed. Recently constant amplitude pre-coded multi-code spread spectrum systems using extended m-sequence have been proposed. In this paper we consider an extended m-sequence based constant amplitude multi-code spread spectrum system with code set partitioning. By grouping the orthogonal codes into 4 subsets, not only is the computational complexity of the transceiver reduced but BER performance also improves. It has been shown that parity checking on four detected codes at the receiver can correct code detection error and result in BER performance enhancement. In this paper we propose a improved parity check receiver. We carried out computer simulation to verify feasibility of the proposed algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.47-53
• /
• 2023

In this paper, We designed a waveguide-type feed structure that converts millimeter wave dual-polarized signals into monopulse signals and presented a manufacturing method. At millimeter-wave such as the W band, the size of the waveguide is very small, making it very difficult to manufacture complex structures. Therefore, because manufacturability is important for the waveguide-type feed structure in the millimeter-wave, electro forming and diffusion bonding were proposed and verified in this study. The designed monopulse feed structure consists of eight 180° hybrids that combine 90° hybrids and self-compensating phase shifters, and four OMTs to separate dual polarization. The designed feed structure was designed to facilitate electro forming and diffusion bonding, and the manufactured feed structure was verified through a network analyzer. It was confirmed that the two proposed production methods produce a monopulse signal well through the measured magnitude and phase of the port.

• Electronics and Telecommunications Trends
• /
• v.16 no.6 s.72
• /
• pp.117-125
• /
• 2001

본 고에서는 최근 무선데이터 통신시스템용으로 2.4GHz 대역에서 블루투스 등 새로운 통신기기가 출현함에 따라서 이러한 기기에서 사용되는 여러 확산방식 중 직접열확산방식을 중심으로 하여 국내의 기술기준에 근거한 일본, 미국, 유럽의 측정방법에 대하여 검토하였다. 이러한 검토를 통하여 다양한 측정 방법들이 갖는 특징과 차이점들을 분석하여 국내에 적용할 수 있는지를 검토하고자 한다. 그리고 점유주파수대역폭, 주파수 허용편차, 공중선전력, 불요발사 등의 세부적인 항목을 함께 다루며, 각각의 측정 항목에 관한 구체적인 방법과 절차를 살펴볼 것이다.