• Title/Summary/Keyword: 대역폭 측정방식

Search Result 165, Processing Time 0.025 seconds

Performance analysis of the satellite range measurement using tone method in the presence of noise (Tone 방식을 사용한 위성 거리 측정 방법에 대한 잡음의 영향)

  • 김영완;김호겸장대익
    • Proceedings of the IEEK Conference
    • /
    • 1998.10a
    • /
    • pp.163-166
    • /
    • 1998
  • Toen 방식을 사용하는 거리 측정시스템의 잡음 및 간섭에 대한 열화 도를 분석한다. 위성 링크상의 잡음 및 다중 변조 방식에 의한 전송 신호간 간섭들로 인하여 위상차 측정에 열호가 발생하며, 열화 도는 ranging 측정 시스템의 잡음 대역폭에 의존한다. Ranging 측정 모드에서는 잡음 대역폭 8Hz, 4Hz 그리고 1Hz에 대하여 0.3dB 열화가 방샐하였으며, ranging 및 원격 측정 데이터 전송 모드에서는 대역폭에 따라 6.4dB, 4.2dB, 4dB가 발생하였다.

  • PDF

A Fast and Robust Scheme for Measuring Internet Bottleneck Bandwidth (빠르고 안정적인 인터넷 병목 대역폭 측정기법)

  • Park, Hong-Ki;Jang, Ju-Wook
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2003.11b
    • /
    • pp.1105-1108
    • /
    • 2003
  • 제한된 네트워크 자원을 효율적으로 활용하기 위해서는 네트워크의 대역폭 측정이 선행되어야 한다. 대역폭의 측정을 위해서 다양한 방법이 제시되었으며 Yoo Han-seoung이 제안한 Fast Convergence Scheme[1] 방식은 적은 계산량으로 빠르고 정확하게 대역폭을 찾을 수 있었으나 네트워크의 변동에 민감하게 반응하는 문제점이 있었다. 따라서 본 연구에서는 Fast Convergence Scheme 방식에서의 오류 측정값에 대한 안정성을 높이는 알고리즘을 제안하였다.

  • PDF

Spectral characteristics of PCM/PSK/PM multiple modulation scheme for KOMPSAT (다목적 실용 위성 관제 신호 전송을 위한 PCM/PSK/PM 다중 변조 방식의 대역 특성)

  • 김영완;이점훈고지환이성팔
    • Proceedings of the IEEK Conference
    • /
    • 1998.10a
    • /
    • pp.159-162
    • /
    • 1998
  • 본 논문은 단일 채널에 다수의 정보 신호를 전송하기 위하여 사용하는 PCM/PSK/PM 변조 방식의 전송 신호 대역 특성에 대하여 기술하였다. 위성 관제 신호인 원격 명령 신호 및 원격 측정 신호의 변조 지수에 따라 전송에 필요한 대역폭과 위성과의 거리 측정 신호 전송에 필요한 전송 대역폭을 산출하며, 부 반송파 주파수 사용에 대한 관계를 고찰하였다. PCM/PSK/PM 변조 방식의 대역폭은 위상 변조 지수 1.2 rad 이하에서는 부 반송파 주파수와 전송 데이터 율에 비례한다. 2kbps 원격명령 데이터 전소에 필요한 원격 측정 신호를 위한 부 반송파는 131. 072kHz가 적합하다.

  • PDF

Bandwidth Redistribution Based Fairness Control Method for the IEEE 802.17 Resilient Packet Ring (IEEE 802.17 레질런트 패킷링을 위한 대역폭 재분배 기반 공정성 제어 방식)

  • Kim, Tae-Joon;Kim, Hwang-Rae
    • Journal of Korea Multimedia Society
    • /
    • v.9 no.7
    • /
    • pp.844-853
    • /
    • 2006
  • The IEEE 802.17 Resilient Packet Ring (RPR) for future Local, Metropolitan, and Wide Area Networks was recently standardized, but it still suffer from delay jitter deterioration and even some bandwidth loss under unbalanced overload. In order to overcome these drawbacks, this paper proposes a bandwidth redistribution based fairness control method, compatible with the legacy one, in which each congested node measures the amount of available bandwidth of its bottleneck link resulted from regulating upstream nodes' shares of the link bandwidth, calculates optimal fair rate with the number of uptream nodes requiring more bandwidth, and then redistributes the available bandwidth to the upstream nodes by advertising the rate. The performance evaluation results show that the proposed method fairly redistributes 95% of the bottleneck link bandwidth with even only two redistributions.

  • PDF

원형편파의 축비 대역폭 개선을 위한 직렬 급전 십자개구 결합 마이크로스트립 안테나

  • 김형락
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2001.11a
    • /
    • pp.347-348
    • /
    • 2001
  • 마이크로스트립 안테나가 가지는 가장 큰 단점인 협대역 특성을 개선하기 위해 그 동안 수많은 연 구와 방법들이 제안되었는데 특히 원형편파 안테나는 임피던스 대역폭 외에 축비 대역폭까지도 고려 되어야 하므로 더욱 심화된 협대역의 특성을 가지게 되어 설계에 많은 어려움이 있었다. 일반적으로 원형편파 마이크로스트립 안테나를 설계하는 방법 중 급전 구조면에서는 크게 단일 급전 방식과 하이 브리드 형태의 급전방식이 있다. 단일 급전 방식의 원형편파 안테나는 구조가 간단하고y 제작이 간편 하며, 안테나의 물리적 크기를 줄일 수 있어 배열시 장점이 있으나 구조의 특성상 협대역의 축비 대역 폭을 가지며I 하이브리드 급전 원형편파 안테나는 구조가 복잡하고, 제작이 어려우며, 안테나의 물리적 크기가 커진다는 단점이 있으나 광대역의 축비 대역폭을 가진다. 따라서 원형편파 안테나의 설계시 축 비 대역폭과 안테나의 물리적 크기 간의 trade-off를 고려하여야한다. 최근에는 이를 고려한 단일 급전 을 이용하면서도 개선된 축비특성올 얻을 수 있도록 십자개구 개구를 통해 두 개의 직교 모드를 방사 패치에 급전하는 구조가 제안되기도 하였다. 하지만 이는 일반적인 단일 급전 방식보다 개선된 축비 대역폭을 얻을 수 있었으나 중심주파수에서 2.5%에 불과하였다. 본 논문에서는 단일 급전 십자개구 결합 방식이 가지는 협대역의 축비 대역폭을 개선하기 위해 단 일 급전으로 하이브리드 급전의 효과를 가져올 수 있는 직렬 급전 십자개구 결합 마이크로스트립 안 테나를 제안하였으며, 기존에 발표된 단일 급전 십자개구 결합 안테나와의 축비 대역폭, 이득, 방사패 턴, 그리고 임피던스 대역폭 둥과 비교하여 개선된 특성을 제시하고 제안된 안테나의 타당성을 보였 다. 실제로 2.4GHz의 주파수에서 제안한 직렬 급전 십자개구 결합 단일 마이크로스트립 안테나의 측 정결과 기존에 연구된 안테나보다 약 2배정도 증가된 4.6%의 축비 대역폭, 10%의 임피던스 대역폭 (VSWR<1.5), 그리고 8.2dBi의 최대이득 특성을 확인할 수 있었으며, 이를 바탕으로 시권셜 로테이션 기법올 사용한 $2\times2$ 배열 안테나는 17.5%의 축비 대역폭, 20.8%의 임피던스 대역폭(VSWR<1.5), 그리 고 12.5dBi의 최대이득을 얻을 수 있었다. 이에 해당하는 제안된 단일 안태나와 $2\times2$ 배열 안테나의 구조, 측정된 축비 대역폭 및 이득특성, 그리고 입력 반사손실을 그림 I, 2, 3에 각각 나타내었다.

  • PDF

The effect of noise and doppler for range measurement of low orbit satellite using tone method (톤 방식을 사용한 저궤도 위성 거리 측정에서의 잡음과 도플러 영향 분석)

  • 김영완;박동철
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.5A
    • /
    • pp.641-650
    • /
    • 2000
  • The effects of noise and doppler for low orbit satellite range measurement using tone method are represented in this paper. Also the optimal noise bandwidth of range signal detection circuit which is used for range measurement system of KOMPSAT is proposed. Based on the effects of satellite orbit parameters via the deduction of dynamic motion characteristics of low orbit satellite and signal to noise spectral density of range measurement signal, the effects of noise and doppler for range measurement system are analyzed. The effect of satellite link noise is decreased, but the effect for doppler is increased as the PLL noise bandwidth of range signal detection circuit is increased. The validation of analyzed effect is verified via comparison of measurement results of KOMPSAT's range measurement system and simulation results in environments of low orbit satellite.

  • PDF

Comparative Analysis of Methods to Support Dynamic Adaptive Streaming over HTTP (HTTP 기반 동적 적응형 스트리밍 연구의 비교·분석)

  • Jin, Feng;Kim, Mijung;Yoon, Ilchul
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2014.10a
    • /
    • pp.527-530
    • /
    • 2014
  • DASH is a well-known streaming technology, which was proposed in 2010 by MPEG and standardized in 2011. Major multimedia contents service providers, including Apple, Microsoft, and Adobe are all using this technology to support their media streaming services. Whenever a new service is requested to the server, the DASH technology helps servicing the multimedia streaming to client by recognizing the capacity of network and by adapting the quality of the multimedia contents. In DASH, the quality of multimedia contents will be automatically lowered to meet the fluctuating network status, when undesirable breaks interrupt the network. In this paper, we classified and analysed the advantages and disadvantages of DASH researches in three aspects: bit-rate measurement method, bandwidth aggregation method; rate adaptation metrics, algorithms and logics; user's experiences and QoE.

  • PDF

A Study on the Available Bandwidth Measurement Scheme for Efficient Streaming Services (효율적인 스트리밍 서비스를 위한 가용대역폭 측정 기법에 관한 연구)

  • Lee, Hee-Sang;Lee, Sun-Hun;;;Chung, Kwang-Sue
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2005.11a
    • /
    • pp.652-654
    • /
    • 2005
  • 인터넷에서의 효율적인 스트리밍 서비스(Streaming Service)를 위해서는 안정된 전송률의 보장이 중요하며, 네트워크의 대역폭이 제한적이기 때문에 네트워크를 공유하는 경쟁 트래픽의 형평성에 대한 고려도 필요하다. 이러한 필요성에 따라 멀티미디어 데이터 전송의 주요 프로토콜인 UDP(User Datagram Protocol)에 혼잡제어 메커니즘 적용에 대한 연구가 활발히 진행되고 있으며, 대표적으로 가용대역 폭 측정을 통한 혼잡제어 기법이 있다. 이 기법은 혼잡제어를 하기 위해서 네트워크의 상태에 따라 가변하는 가용대역폭(Available Bandwidth)을 측정하고 이것을 기반으로 전송률을 조절하는 방식을 말한다. 본 논문에서는 네트워크 상태에 따라 혼잡제어를 하기 위해서 가용대역폭을 보다 빠르고 정확하게 측정하고, 이것을 기반으로 스트리밍 서비스에 맞게 전송률을 조절하는 방법을 제안하였다. 실험을 통해 본 논문에서 제안한 방법이 기존의 가용대역폭을 측정하는 스트리밍 프로토콜 보다 성능이 개선이 되었음을 확인할 수 있었다.

  • PDF

A Study for Indirect Channel Noise Measurement in Powerline Communications (전력선 통신 채널의 간접 잡음 측정에 대한 방안 연구)

  • Son, Hyun-Il;Oh, Hui-Myoung;Lee, Jae-Jo;Lee, Won-Tae;Kim, Kwan-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2002.07d
    • /
    • pp.2611-2613
    • /
    • 2002
  • 본 논문에서는 전력선 통신 채널의 간접 잡음 측정에 대한 연구를 하였다. 주위 환경에 의한 Noise 및 여러 통신매체에 의한 방해전파에 의해 전력선 통신 채널은 송신 측의 고출력 요구와 가능한 전력선 통신의 대역폭이 감소하는 악화된 통신환경을 보여 준다. 이러한 Noise를 측정하는 방법은 Coupling Capacitor를 이용한 직접 측정 방식과 이동 측정 장치를 이용한 간접 측정 방식이 있다. 전자는 광범위한 측정지역과 측정장비의 설치 등에서의 번잡함으로 효과적인 Noise 측정이 어렵다. 본 논문에서는 두 가지 방식의 Noise 측정 결과의 비교 및 검토를 통해 이동 측정 장치를 이용한 방식의 장점과 보완할 점을 검토였으며, 특히 직접 측정 방식과의 결과 값의 차이를 보상할 수 있는 상관관계 분석의 필요성을 고찰하였다.

  • PDF