• Title/Summary/Keyword: 대역폭 점유 효율

Search Result 23, Processing Time 0.021 seconds

Design of wideband microstrip monopole slot antenna (광대역 마이크로스트립 모노폴 슬롯안테나의 설계)

  • Lee, Young-Soon;Cho, Yun-Ki
    • Journal of Advanced Navigation Technology
    • /
    • v.16 no.5
    • /
    • pp.766-772
    • /
    • 2012
  • In the present study, wideband microstrip monopole slot antennas which can be applied to the RF4CE Zigbee remote controller are designed. First I-shaped monopole slot antenna which has ${\lambda}g/4$ length at 2.45GHz is designed. In particular, a conducting via is used to connect the microstrip feed line and the ground plane surrounded with the etched slot for the bandwidth improvement. In order to reduce the antenna size, it is changed into L-shaped and T-shaped monopole slot antennas for which improve results of antenna performance are observed. In case of T-shaped monopole slot antenna, impedance bandwidth(VSWR<2) is about 3.32GHz, and also its radiation efficiency and gain is more than 90% and 2.1dBi respectively at whole operating frequency range. In particular, all of proposed monopole slot antennas have the end-fire radiations which has a maximum radiation power toward direction of open ends of monopole slots.

Research on Effective Security Control Measures Against DDoS Attacks (DDoS 공격에 대한 효과적인 보안 관제 방안)

  • Jung, Il-Kwon;Kim, Jeom-Gu;Kim, Kiu-Nam;Ha, Ok-Hyun
    • Convergence Security Journal
    • /
    • v.9 no.4
    • /
    • pp.7-12
    • /
    • 2009
  • It is very difficult to completely block the DDoS attack, which paralyzes services by depleting resources or occupying the network bandwidth by transmitting a vast amount of traffic to the specific website or server from normal users' PCs that have been already infected by an outside attacker. In order to defense or endure the DDoS attack, we usually use various solutions such as IDS (Intrusion Detection System), IPS (Intrusion Prevention System), ITS (Intrusion Tolerance System), FW (Firewall), and the dedicated security equipment against DDoS attack. However, diverse types of security appliances cause the cost problem, besides, the full function of the equipments are not performed well owing to the unproper setting without considering connectivity among systems. In this paper, we present the effective connectivity of security equipments and countermeasure methodology against DDoS attack. In practice, it is approved by experimentation that this designed methdology is better than existing network structure in the efficiency of block and endurance. Therefore, we would like to propose the effective security control measures responding and enduring against discriminated DDoS attacks through this research.

  • PDF

Design and Analysis of 4D-8PSK-TCM System Considering the Nonlinear HPA Environment (비선형 HPA 환경을 고려한 4D-8PSK-TCM 시스템의 설계 및 분석)

  • An, Changyoung;Ryu, Sang-Burm;Lee, Sang-Gyu;Ryu, Heung-Gyoon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.29 no.4
    • /
    • pp.299-307
    • /
    • 2018
  • Considering a nonlinear high power amplifier(HPA) and a predistorter, we have designed a four-dimensional 8-ary phase shift keying trellis-coded modulation(4D-8PSK-TCM) system, which is recommended for X-band satellite communications. Subsequently, we have evaluated and analyzed the spectrum, constellation characteristics, and BER performance of the system. In satellite communications, owing to the limited power, nonlinear characteristics that determine the operating point of the HPA must be analyzed because the HPA consumes high power. We herein report the design of the 4D-8PSK-TCM system, with efficiencies of 2 and 2.25 bits/channel-symbol. The simulation results confirmed that a 0.35 roll-off value is effective, considering the low peak-to-average power ratio(PAPR) characteristic and the narrow occupation bandwidth of the spectrum. It also confirmed that approximately 15~20 dB of output backoff(OBO) value is required at the HPA when the predistorter is not used, and approximately 1 dB of the OBO value is required when the predistorter is used.