• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.83-86
• /
• 2000

가변 필터는 송수신기에서 회로를 간단히 하여 특히 멀티채널을 사용하는 송수신기에서 중추적 역할을 담당하게 된다. 본 논문에서는 소형경량이고, 구조가 단순하여 제작이 간단하며, MMIC화하기 쉬운 실용적인 가변필터를 설계 및 제작하여 그 사용가능성을 제안하였다. 본 논문에서는 중심주파수 1.95GHz, 통과대역이 100MHz인 대역통과 링 필터를 Split 모드 방식으로 구현하고 이를 바탕으로 300MHz의 가변대역폭을 갖는 필터를 제작하였다. 이 필터의 대역폭을 가변하기 위하여 바이어스전압에 따라 커패시턴스가 변화하는 Varactor 다이오드를 사용하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.172-172
• /
• 2017

본 연구는 차량의 AW(AutoWiping) 기능을 위해 장착된 강우센서를 이용하여 강우정보를 생산하는 기술을 개발하고자 하였다. AW(AutoWiping) 기능이란 차량 앞창(Windshield)에 빗방울이 맺히게 되면 광신호의 산란으로 인해 수광부에 들어오는 감소되는 광신호의 정도에 따라 차량 와이퍼의 속도를 결정해 주는 기능이다. 빗방울이 많이 맺힐수록 광신호는 감소되며 와이퍼는 더 빠른 속도로 작동을 하게 된다. 여기서 강우센서가 강우량이 많으면 감소된 광신호 데이터를 표출하는 현상을 이용하여 강우정보를 생산한다. 강우센서는 총 8개의 채널로 이루어져있고, 초당 250개의 광신호 데이터를 수집하며, 10분이면 약 120만 개의 데이터가 생산되게 된다. 이 대량의 데이터에서 정확한 강우량을 산출하기 위해 강우센서의 초기값과 와이퍼 이동시 발생하는 순간 이상치를 제거해야 한다. 하지만 일일이 수백만 개 이상의 데이터에서 모든 이상치를 제거하는 작업은 불가능하다. 따라서 이상치를 포함한 회귀 분석 방법을 연구하였고, 인공강우 발생기를 이용하여 광신호를 강우량으로 환산하는 2가지 회귀식이 유도되었다. 이들은 각각 이상치를 모두 포함시켜 독립변수(광신호)에 따라 종속변수(강우량)의 값이 변화하는 관계를 나타내는 선형회귀분석(model 1), 임계치를 정하여 일정 이상치가 제거된 신호만 통과시키는 대역통과 필터링 분석(model 2)으로 유도된 회귀식을 실강우에 회귀식을 적용하여 정확도를 분석하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.814-820
• /
• 2015

In this paper, A high selective dual-band bandpass filter was proposed using a dual-mode ring resonator with two short-circuited stubs. For dual-mode resonance, the ring resonator is directly connected with non-orthogonal feed-lines via coupling capacitors. Two short-circuited stubs which are unequal lengths are simultaneously placed at two corners along the two symmetry plane of the ring resonator in order to obtain dual-band responses. Because the feeding angle perturbated ring resonator of the proposed dual-band bandpass filter has the symmetrical structure, Even/Odd mode analysis can be well applied to extract the scattering parameters and transmission zero frequencies. The proposed dual-band bandpass filter was designed and fabricated for WLAN(Wireless Local Area Network) application of IEEE 802.11n standard. The measured results showed a good agreement with the simulation results, and it should be well applied not only for WLAN applications but also for any other communication systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.674-679
• /
• 2007

In this paper, the size of the dual-mode microstrip ring resonator is reduced by adding four open stubs, and bandpass filters having 100 MHz bandwidth are designed at the center frequency of 2 GHz. The size of the ring resonator can be controlled by varying the capacitance of the stubs, and the bandpass filter can be designed in two cases, which are two combinations of the stubs. Two bandpass filters are designed and fabricated by using the two-stage bandpass filter circuit model of the proposed structure, and the measured results show good agreement with the simulated results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.6
• /
• pp.8-12
• /
• 2008

A ring resonator based band-pass filter enabling enhanced sideband suppression was proposed and demonstrated. It is composed of a single-ring based band-pass section combined with a band-rejection section based on two different coupled rings. The sideband region of the transfer characteristics of the first band-pass filter section was selectively suppressed by means of the band-rejection section without causing any excessive insertion loss. As a result, the overall transfer characteristics of the proposed filter was unproved so that its sideband suppression was elevated to allow for sharper roll-off and narrower bandwidth. In this work, a conventional single-ring band-pass filter and a proposed filter including the band-rejection section were designed and fabricated. As for the achieved device performance, with the center frequency at about 4 GHz, the sideband suppression ratio was increased as much as 8 dB and the 3-dB bandwidth was reduced from 98 MHz to 48 MHz by about 51% with no remarkable excessive insertion loss as expected. And the quality factor of the device was increased by about 105%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.214-217
• /
• 2004

In this paper, a Ka-band LTCC (low temperature co-fired ceramic) narrow bandpass filter (BPF) is firstly presented. This BPF shows very narrow 3dB fractional bandwidth of 4.5 ％ centered at 28.7㎓. The advantages of multi-layered LTCC technology such as high integration and vertical stacking capabilities were employed to design three-dimensional interdigital end-coupled embedded microstrip narrow BPF. The difficulties in controlling the precise distance between two adjacent resonators in LTCC end-coupled BPF were overcome by locating the resonators on different layers. The measured insertion loss is 3dB at 28.7㎓, pass band is from 27.9 ㎓ to 29.2 ㎓, and the return loss in the pass band is less than 10 dB.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.475-479
• /
• 2006

An integrated photonic K-band microwave bandpass filter has been proposed and demonstrated by incorporating a polymeric ring resonator. Its transfer characteristics were adjusted by shilling the resonance wavelength of the ring resonator via the thermooptic effect. The achieved performance of the filter includes the center frequency of 20 GHz, the attenuation of ${\sim}15dB$, the bandwidth of 2 GHz, and the corresponding quality factor of 10. The microwave output power within the passband of the device was adjusted at the rate of about 6.7 dB/mW in the range of 27 dB. This kind of device with electrically controllable transfer characteristics can be applied to implement microwave switches and other devices.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.25-31
• /
• 2003

In this paper, we proposed a novel compact microstrip lowpass filter with an ultra-wide stopband and a sharp cutoff frequency response. To improve the cutoff response of the conventional filter, the coupling effect between two open stubs is used. The slot on the ground with conventional shunt open stubs plays an important role of increasing the stopband at a high frequency. The combination of these structures gives the filter the characteristics of an ultra-wide stopband with a prominent cutoff sharpness. The fabricated microstrip lowpass filter with the size of 19.2 mm $\times$ 14.9 mm has -3 dB cutoff frequency at 1.1 GHz and -20 dB stopband from 1.5 GHz to over 30 GHz. The insertion loss is less than -0.15 dB in the passband.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.533-539
• /
• 2004

In this work, in order to realize a band pass filter with wide-band characteristics for mobile communications, 2 GHz band pass filter was designed using ring resonator with stub. The three stage wide-band BPF was designed and fabricated. For broadband design, the ring circumference was divided by 4 sections with 1/8 wavelength and 2 sections with 1/4 wavelength which have different line impedances. The characteristics of the proposed BPF were highly improved by using three stage ring resonator. The characteristic impedance values of each sections were obtained by Powell's least square algorithm where differentiations are not needed. The measured results showed a good agreement with the theoretical results as well as ADS simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.299-302
• /
• 2008

In this paper, A compact ultra-wideband(UWB) bandpass filter(BPF) with WLAN notched filter has been proposed. H-shaped slot is studied and adopted to tighten the coupling of inter-digital capacitor in order to improve the BPF's performance. Three pairs of tapered defected ground structures(DGS) are formed to assign their transmission zeros towards the out of band signal, thereby suppressing the spurious passband. Also Meander line slot is developed to reject the undesired wireless local-area network(WLAN) radio signals. That's combining these three structures we obtain a small sized UWB BPF.