• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.338-338
• /
• 2015

하천으로 유입되어 수질 오염을 야기하는 오염원은 오염 배출원이 명확하여 하나의 점으로 나타낼 수 있는 점오염원(Point Source)과 오염원이 명확치 않은 비점오염원(Non-point)으로 구분된다. 생활하수, 축산폐수와 같이 오염원이 명확한 점오염원은 하천 유입 이전에 처리장을 거쳐 정화작업이 가능한 반면, 비점오염원은 오염원이 명확치 않아 처리에 어려움이 따른다. 또, 오염물의 양과 이동 경로가 예측이 불가능하고 강우시에는 특별한 처리 없이 하천으로 바로 유입된다. 비점 오염원의 종류는 토사, 영양물질, 유기물질, 농약, 바이러스 등 다양하다. 이 중에서 토양에 흡착되어 이동하는 질소와 인은 하천으로 유입되어 부영양화를 야기하는 특성이 있어 더욱 처리가 필수적이다. 이러한 비점오염원으로 인한 수질 오염을 줄이기 위해 여러 최적관리기법(Best Management Practices, BMPs)이 제시되어 있으며 오염 물질의 하천 유입을 차단하는 것에 중점을 둔다. 가장 널리 이용되는 방법으로는 비점오염원 저감시설 중 하천변에 식물체를 설치하여 토양의 유실을 막는 식생대(Vegetative Filter Strip, VFS)가 있다. 식생 밀집 지역의 설치를 통해 표면 유출을 차단하고 토양 유실 감소와 수체로의 오염물질 확산을 막을 수 있다. 이에 VFSMOD-w를 이용하여 강우시 식생대를 통한 토양 유실 감소 효율에 대한 연구를 수행하였다. 연구 대상 지역으로 비교적 수문 및 토양 자료가 풍부한 청미천 유역을 선정하였다. 그 결과, 식생대의 길이와 식생대 내 식물체의 파종간격이 가장 지배적인 영향을 미치는 것이 확인된다. 이때, 식물체의 종류는 식물체 파종으로 인해 변화되는 토양의 수정된 Manning의 조도계수로 구분한다. 모든 강우 및 식물체 조건이 동일할 때, 식생대 내 식물의 파종 간격이 좁고 식생대의 길이가 길수록 토사 저감 효율이 증가하는 결과가 도출되었다. 식물체의 높이, 식물체의 종류 및 식물의 파종간격이 입력 자료로 요구되나 이 중 식물체의 높이는 토사 저감 효율에 영향을 미치지 않는 것으로 나타났다. 또, 동일한 강우 조건에서 식생대의 길이가 0.5 m에서 1.0 m로 2배 증가하였을 때 토사 저감 효율이 두 경우 모두 95% 이상의 효율을 보이는 것이 나타났다. 이는 식생대의 길이가 증가할수록 토사 저감 효율이 증가하나 일정 길이 이상이 되면 대부분의 토사가 저감되는 것을 의미한다. 결론적으로 식생의 파종 간격이 좁을수록 토사 저감 효율이 증가하더라도 식물체의 성장을 고려한 적절한 파종 간격을 선정하여야 한다. 즉, 식생대의 설치는 적절한 파종 간격 및 식생대 길이를 식생대 설치지역의 강우 특성에 따라 결정지어야 한다고 판단된다.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.6
• /
• pp.680-690
• /
• 2022

Vibrations in the pipe system trigger fatigue-related issues and lead to fatal other problems caused by pipe damage. There are numerous studies to analyze and reduce the cause of pipe vibration, among which a small number of studies are being conducted on pipe vibration reduction using friction supports. The study of friction supports, however, focused only on predicting and evaluating the performance of the friction supports and seldomly considered the design perspective of the install location of the supports. Therefore, this study intends to suggest the optimization process for finding the best installation region of friction support to attenuate the vibration of entire piping system. The optimal position of the friction support is predicted only by linear analysis to guarantee optimization efficiency in the design process. The designed friction support location is verified by time domain analysis.

• Journal of Mushroom
• /
• v.12 no.1
• /
• pp.67-72
• /
• 2014

This study was carried out to provide standardization for mushroom production of high quality at farmhouse. The standardization does much to improve merchantable quality, distribution efficiency and fair dealings by shipping of the standard agricultural products. Therefore, modification of these standards is required to fit farmhouse situations. The standardization for production of Pleurotus eryngii of high quality follows like this. A grades were above 90 g at average weight, more 50 mm at stipe thick, 1.6~1.7 at stipe length/stipe thick rate and 1.1~1.2 at pileus diameter/stipe thick ratio. B grades were more 45 g at average weight, above 40 mm at stipe thick, 1.8~1.9 at stipe length/stipe thick ratio and 1.2~1.4 at pileus diameter/stipe thick ratio.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.853-859
• /
• 2015

1-DOF shear building was designed, built and tested to investigate the interactions between the shear building and the shaking table excited harmonically by the electro-magnetic forces. In the experiments horizontal accelerations of the shaking table and the shear building were measured. To understand the experimental results experimental setting was modeled as an unconstrained 2-DOF system under the hormonic forces. The responses of the shear building and the shaking table of the unconstrained 2-DOF system were found with the equations of motions. The magnification factors of the table and the shear building with respect to the amplitude of the harmonic forces and the transmission of the shear building with respect to the table excitations were found and compared with the experimental results.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.98-103
• /
• 2010

A series of fire experiments have been performed to examine the measurement bias of the bare bead thermocouple widely used in fire testing and analyze the measurement bias of bare bead thermocouple comparing with the measured temperature using the aspirated thermocouple. The measured temperature of the bare bead thermocouple was lower than that of the aspirated thermocouple in the hot upper layer while it showed opposite trends in the upper layer. Also, the bare bead thermocouple showed higher measurement bias in the lower layer rather than upper layer in the compartment fire. The maximum relative percentage error of the bare bead thermocouple against the aspirated thermocouple reached 250% in the present study. The present study points out the need of correction process of the measured temperature by bare bead thermocouple for improving the reliability of the fire tests.

• Journal of Internet of Things and Convergence
• /
• v.4 no.1
• /
• pp.37-41
• /
• 2018

This paper examines smart warning triangles to prevent secondary accidents on roads. After a traffic accident on the road, a safety tripod must be installed to notify the accident. However, it can cause secondary accidents during warning triangle installation. To solve this problem, a smart warning triangle was proposed and implemented. A smart warning triangle acts as a triangle through a logo light projector when it detects an impact. Arduino functions as an impact detector and a logo light projector. The proposed smart safety tripod is expected to help prevent secondary accidents by acting as a safety tripod if the brightness of illumination is complemented.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1904-1908
• /
• 2008

본 연구에서는 해안가 암반대수층에서 전기전도도의 수직적인 변화를 관측하여 조석에 의한 해수와 담수 전이대의 특성을 파악하였다. 연구지역은 부경대학교 대연캠퍼스 주변 해안대수층이며, 응회질퇴적암과 안산암 및 안산암질 화산각력암 등이 분포한다. 연구에 이용된 지하수 관측공 (PK1공)은 부경대학교 대연캠퍼스 내 기숙사 동측에 위치하고 있다. 지하수공의 개발심도는 지표 면하 120 m, 케이싱은 지표면하 19 m까지 설치되어 있으며, 내경은 0.2 m로서 해안가에서 180 m 정도 이격되어 있다. 해안대수층 내 해수와 담수 전이대를 파악하기 위하여 관측공 내에 TLC Meter(Model 107, Solinst)를 삽입하여 전기전도도의 수직적인 변화를 지하수공 내 심도 50 m 까지 측정하였다. 전기전도도의 수직적인 관측은 썰물(low tide)일 때, 썰물에서 밀물(high tide)로 될 때 및 밀물일 때로 나누어 총 3회 수행되었다. 전체적인 전기전도도의 분포는 썰물일 때 $630{\sim}47300{\mu}S/cm$, 썰물에서 밀물로 되는 시기에는 $672{\sim}61900{\mu}S/cm$ 및 밀물일 때는 $678{\sim}67900{\mu}S/cm$로 나타났으며, 따라서 밀물일 때가 썰물일 때보다 전기전도도의 농도가 높은 것으로 나타났다. 해수와 담수 전이대의 분포는 썰물일 때 약 $20{\sim}50\;m$, 밀물일 때 약 $20{\sim}38\;m$ 정도로 나타났으며, 이는 밀물 시 해수의 침투로 인해 전이대 하부구간의 농도가 상승하였기 때문이다. 해수와 담수 전이대의 구간을 세분화하여 분석하기 위해, 담수가 우세한 전이대, 주 전이대 및 해수가 우세한 전이대 구간으로 구분하였다. 담수가 우세한 전이대는 썰물과 밀물일 때 모두 지표면하 $20.0{\sim}25.5\;m$ 구간이었으며, 주 전이대에서는 지표면하 $25.5{\sim}25.7\;m$ 정도로 나타났다. 그러나, 해수가 우세한 전이대에서는 썰물일 때 지표면하 $25.7{\sim}50.0\;m$ 구간, 밀물일 때는 지표면하 $25.7{\sim}38.0\;m$ 로서 전이대의 폭이 19 m 정도의 차이를 보였다. 본 연구를 통해 해안가 암반대수층에서 해수와 담수의 전이대는 조석에 의해 영향으로 인해, 썰물 시의 전이대가 밀물에 비해 그 폭이 더욱적음을 확인할 수 있었다.

• Economic and Environmental Geology
• /
• v.49 no.2
• /
• pp.155-165
• /
• 2016

Quartz schist - quartzite is often intercalated in metasedimentary rocks of Ogcheon belt or aligned parallel to the boundary between Yeongnam massif and Ogcheon belt. However, stratigraphic sequence and or geologic age of the rocks has been still variable among authors as Precambrian or Paleozoic. In this study, we carried out SHRIMP U-Pb age data of detrital zircons from Yeongam and Yeongsanpo areas and compared ours with other zircon ages from other areas. The detrital zircons from the studied area show no age younger than 1.8 Ga but yielded clusters at Neoarchean (2.5 Ga) and Paleoproterozoic (1.8 Ga). On the other hand, the age range of zircon U-Pb dating of Paleozoic quartzites yielded from Archean to middle Paleozoic and clusters at Paleoproterozoic, Neoproterozoic and Paleozoic. The characteristics of the zircon age range and the dominant age peak might become a key to classify the Proterozoic to Paleozoic quartz schists-quartzites, which ages are still remained under controversy. Based on the statistical results of the zircon ages in this study, quartz schist - quartzite from Yeongam and Yeongsanpo is considered to be deposited during Proterozoic.

• Korea journal of population studies
• /
• v.34 no.3
• /
• pp.55-84
• /
• 2011

This study initiated with the intention to reveal the social consultations and fissures through a comparative analysis on generational characteristics by indicating occupation-related identities with the concept of social identity supported by theoretical resources. According to the three dimensions of social identity which are evaluation, potency and activity, there was more generational agreement rather than difference toward occupation-related identities. Among the 44 identities, only evaluation dimensions on minister, congressman, plane captain, farmer and potency dimensions on CEO of a major companies, professor, medical doctor, nurse, celebrity, shaman, unemployed person were statistically significant. For 'Leader and Professional', the respondents in their 50's gave high scores in both evaluation and potency dimensions. On the other side, the 30's had negative viewpoints while the 20's and 40's had neutral perspectives. For the potency dimension, the age groups were divided into the 20's, 30's and 40's, 50's; having the younger generations underestimate the potency dimension of such categories. Also for the 'General Occupation', 20's and the 30's relatively devaluated with more distinctive degree toward evaluation dimensions. For religion, 20's and 30's were positive toward buddhist monks while the 40's and 50's were more favorable with priests. For the non-economically active population, the lifetime cycle influenced each generations. When performing a two dimensional analysis toward the 'Leader and Professional' with evaluation and potency on each axis, the 50's highly evaluated both evaluation and potency dimension of such identities. However, for the 40's, 30's and 20's, the average value fell while the focus of the distribution deepened. The 30's had negative perspective toward the evaluation dimension while the 20's reflected critical attitude toward the potency dimension.

• Journal of Life Science
• /
• v.26 no.9
• /
• pp.1007-1014
• /
• 2016

A highly efficient, rapid, and reliable multiplex polymerase chain reaction based method for distinguishing ten species of genus Cynoglossus (C. senegalensis, C. abbreviates, C. macrolepidotus, C. arel, C. semilaevis, C. interruptus, C. joyneri, C. lingua, C. robustus, and C. monodi) is described. The species-specific primer sets were designed base on the cytochrome oxidase subunit I gene (1,500 bp). The optimal PCR conditions and primers were selected for ten of Cynoglossus species to determine target base sequences using single PCR. Multiplex PCR using the ten pairs of primers either specifically amplified a DNA fragment of a unique size or failed, depending on each species DNA. The length of amplification fragment of 208 bp for C. senegalensis, 322 bp for C. abbreviates, 493 bp for C. macrolepidotus, 754 bp for C. arel, 874 bp for C. semilaevis, 952 bp for C. interruptus, 1,084 bp for C. joyneri, 1,198 bp for C. lingua, 1,307 bp for C. robustus, and 1,483 bp for C. monodi with the species-specific primers, visualized by agarose gel electrophoresis, allowed perfectly distinction of the Cynoglossus species. The multiplex PCR assay can be easily performed on multiple samples and attain final results in less than 6 hours. This technique should be a useful addition to the molecular typing tools for the tentative identification of Cynoglossus species.