• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.133-141
• /
• 2001

The friction and wear properties of carbon-carbon composites made with different weight percent of $MoSi_2$ as an oxidation inhibitor were investigated using a constant speed wear test apparatus in an oxidation environment. The results indicated the carbon-carbon composites undergoing an abrupt transition of friction coefficient, from low-friction behavior(${\mu}$=0.15~0.2) during normal wear regime to the high-friction behavior(${\mu}$=0.5~0.6) during dusting wear regime at the frictional temperature range of 150~180${\circ}C$. The existence of temperature-dependent friction and wear regimes implied that the performance of specimen made with carbon-carbon composites was markedly affected by the thermal properties of the composites. The carbon-carbon composites filled with MoSi2 exhibited two times lower coefficient of friction and wear rate in comparison with the composites without $MoSi_2$. Especially, the composites containing 4wt% $MoSi_2$ filler showed a significantly improved activation energy for wear due to the reduction of both the porosity and powdery debris film formation on sliding surface when compared to those without $MoSi_2$.

• Korean Journal of Environmental Biology
• /
• v.25 no.3
• /
• pp.191-196
• /
• 2007

Indoor air differs from outdoor atmosphere since it contains chemical and physical contaminants from building materials. This study deals with the biological effects of volatile organic compounds (VOCs) released from synthetic fiber carpet materials. One group of Tradescantia inflorescence was exposed to VOCs from the carpet sample in the environmental test chamber, while the other inflorescence group was exposed to a TO-14 standard gas mixture (1 ppm) for comparison. After the exposure, VOCs from the carpet were analysed by the desorber/GC/MS method, and micronuclei in the pollen mother cells of Tradescantia were scored under a microscope $({\times}400)$ to evaluate the genotocixicity induced by the exposure to VOCs. The chemical analysis confirmed that a total of 12 VOCs were released from the carpet materials, among which stylene $(71.9{\mu}g\;m^{-3})$ and toluene $(49.6{\mu}g\;m^{-3})$ were in the highest concentration. Twenty four hours of exposure to VOCs from the carpet in the environmental test chamber resulted in a micronucleus frequency as high as $7.73{\pm}0.75MCN$ per 100 tetrads, which was similar to that induced after exposure to the TO-14 standard gas mixture (1 ppm) for 4 hours. Meanwhile, two hours of exposure to the standard gas mixture did not cause a significant increase in the genotoxicity compared to the spontaneous micronucleus frequency. This result indicates that exposure for a long time to the air contaminated with VOCs from the carpet materials causes a genotoxic effect. The biological-chemical combination analyses in the study proved to be an effective tool for monitoring the indoor air contaminants.

• Journal of radiological science and technology
• /
• v.40 no.3
• /
• pp.377-383
• /
• 2017

The purpose of this study was to evaluate the distribution of spatial scatter ray on the chest radiographs of patients on health examination bus. In this paper, we propose a method for minimize unnecessary exposure by measuring the scattered dose after exposure the actual subject and comparing the body mass index (BMI) with the tube current amount mAs. The results of this study showed that the mean BMI of the subjects was $23.31{\pm}3.12$. The mean mAs value was $2.92{\pm}1.19$, which males was higher than females. The mean value of the scatter ray at position 1 in the radiography room was $771.81{\pm}151.15{\mu}Sv/hr$. The mean value of the scatter rays at the position 2 outside the entrance of the radiography room was measured as $53.86{\pm}25.66{\mu}Sv/hr$. As the BMI and mAs was increase the spatial scatter dose was increased at position 1 and position 2 in the photographing room. In order to minimize the exposure dose of scatter ray, radiation workers should shoot the radiation as low as possible within the range that does not impair the quality of the image. It will be necessary to make efforts to not wait for a waiting person near the entrance door of the photographing room.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.2
• /
• pp.228-232
• /
• 2018

Process-based crop models have been used to assess the impact of climate change on crop production. These models are implemented in procedural or object oriented computer programming languages including FORTRAN, C++, Delphi, Java, which have a stiff learning curve. The requirement for a high level of computer programming is one of barriers for efforts to develop and improve crop models based on biophysical process. In this study, we attempted to develop a Chinese cabbage model using Microsoft Excel with Visual Basic for Application (VBA), which would be easy enough for most agricultural scientists to develop a simple model for crop growth simulation. Results from Soil-Plant-Atmosphere-Research (SPAR) experiments under six temperature conditions were used to determine parameters of the Chinese cabbage model. During a plant growing season in SPAR chambers, numbers of leaves, leaf areas, growth rate of plants were measured six times. Leaf photosynthesis was also measured using LI-6400 Potable Photosynthesis System. Farquhar, von Caemmerer, and Berry (FvCB) model was used to simulate a leaf-level photosynthesis process. A sun/shade model was used to scale up to canopy-level photosynthesis. An Excel add-in, which is a small VBA program to assist crop modeling, was used to implement a Chinese cabbage model under the environment of Excel organizing all of equations into a single set of crop model. The model was able to simulate hourly changes in photosynthesis, growth rate, and other physiological variables using meteorological input data. Estimates and measurements of dry weight obtained from six SPAR chambers were linearly related ($R^2=0.985$). This result indicated that the Excel/VBA can be widely used for many crop scientists to develop crop models.

• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.157-167
• /
• 2011

Many problems, such as unexpected delay and collision with pedestrians or vehicles, occur generally at signalized intersections where bicycle users are frequently involved. These problems have hindered bicycle users from riding bicycles on urban highways. The aim of this study is to suggest proper traffic signal operation methods for safe and convenient highway crossing of bicycles. Three types of crossing methods at signalized intersections are proposed and analyzed: (1) indirect left turn, (2) direct left turn on an exclusive bicycle lane, and (3) direct left turn on a bicycle box. The VISSIM simulation tests were conducted based on fifty-four operation scenarios prepared by varying vehicle and bicycle traffic volumes. Both delay and the number of stops are used as the measures of effectiveness in the analysis. The results from the three-legged signalized intersections suggested that (1) the indirect left turn is appropriate when vehicle demand is high while bicycle demand is not, (2) direct left turn on an exclusive bicycle lane is appropriate when both vehicle and bicycle demands are high, and (3) direct left turn on a bicycle box is appropriate when both vehicle and bicycle demands are light.

• Journal of Technology Innovation
• /
• v.18 no.1
• /
• pp.75-98
• /
• 2010

The purpose of this paper is to give policy implications for relevant policy-makers by analyzing factors affecting performance of industrial R&D programs of the Ministry of Knowledge Economy. The independent variables are type of project leader organization(Big Enterprises, SMEs, Ventures Businesses, Public Research Institutions, Universities), cooperative or noncooperative R&D among industry-university-research institution, total number of project participant organization, total R&D investment, and the ratio of private investment to total R&D investment. The dependent variables are domestic or foreign patents granted and domestic or foreign papers accepted. The method of analysis is Poisson Regression analysis operated by STATA. The results of this research are follows ; Universities show higher R&D performance compared to enterprises or public research institutions in terms of patents and papers as well. Venture businesses show higher patent performance compared to SMEs. Inverted U-shaped relationship between total number of project participant organization and R&D performance is not supported. The higher total R&D investment, the higher R&D performance. The higher the ratio of private investment to total R&D investment, the higher R&D performance.

• Weed & Turfgrass Science
• /
• v.4 no.1
• /
• pp.71-75
• /
• 2015

Playground is frequently used for physical and sports activity by students as well as by common people, which is constructed with various cover materials on the ground. This research surveyed the surface temperature in Kyungpook National University Sangju campus playground which is covered with various cover materials [bare field, zoysiagrass (Zoysia japonica) turf field, urethane track, concrete field, epoxy field and artificial turf field] in Sangju, Gyeongsangbukdo, Korea. Temperature was measured 4 times per day at 09:00, 12:00, 15:00, and 18:00 from May to October 2014 in surface and 1 m height above the ground. Surface temperature was different, depending on cover materials and survey time. Bare field and zoysiagrass turf field was lower surface temperature than other sites. Higher surface temperature site was different depending on survey time. Urethane track and artificial turf field was hotter than other sites at 12 and 15 hours, however concrete and epoxy field was hot at 18 hours. One meter above ground temperature was the highest in artificial turf field except at 18 hours. So natural turf, zoysiagrass playground will increase the athletic performance by reduce the surface and above ground temperature.

• Korean Journal of Microbiology
• /
• v.37 no.4
• /
• pp.265-272
• /
• 2001

The diversity of acid-tolerant epiphytic bacterial communities on deciduous oak tree (Quercus dentate Thunb.) leaves was examined both in the natural forest area with a clean air and in the industrial estate to assess effects of acidic depositions to the phyllosphere using 16S rDNA sequence data. A total of 444 acid-tolerant epiphytic bacterial clones were obtained, resulting in 17 phylotypes by performing a analysis of restriction fragment length polymorphism (RFLP) for PCR-amplified 16S rDNA products. A very low diversity of dominating acid tolerant bacterial communities in both areas was found, just 2 subphyla groups, $\gamma$-Proteobacteria and low-G+C gram-positive bacteria. As tree leaves grow older, diversities of acid-tolerant bacteria on them significantly increased. The community structure of acid-tolerant epiphytic bacteria consisted of Pseudomonas and Enterobacteriaceae groups in the $\gamma$-Proteobacteria subphylum, and Streptococcaceae and Staphylococcus groups in the low-G+C gram-positive bacteria subphylum. The direct influence of acidic depositions on bacterial phylogenetic composition could not be detected especially when higher taxonomic levels such as subphylum, but at narrower or finer levels it could be observed by a detection of Xanthomonadales group belonged to the $\gamma$-Proteobacteria only in the industrial area and of Acetobacteraceae group belonged to the $\alpha$-Proteobacteria. There remains that these specific acid-tolerant epiphytic bacterial groups could be used as indicators for assessing effects of acidic depositions on the phyllosphere.

• Journal of Digital Convergence
• /
• v.9 no.6
• /
• pp.325-341
• /
• 2011

Environmental regulations in the world has been strengthened. International Organization for Standardization (ISO) that international standard for social responsibility in the ISO26000 was published on November 01, 2010. CSR is rapidly changing in global environment. In the meantime, domestic companies such as donations to the required activities ought to be stayed. Strengthening the competitiveness of enterprises in the management tools that should be taken as the movement is taking place. The domestic small and medium-sized corporate social responsibility (SMEs CSR) activities have also taken many changes. In particular, multinational corporations and large companies within the supply chain, B2B companies in partnership appears to have a significant impact on business. In this study, in changing environment for domestic SMEs CEO survey results are based. CSR activities of SMEs and its impact on the financial competence, B2B businesses and B2C business activities of corporate social responsibility has been to analyzed the differences factor. This allows the small and medium-sized companies effectively promote socially responsible business activities, to spread the government, corporate, NGO, and local stakeholder's CSR was to provide a new perspective.

• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.173-183
• /
• 2016

The purpose of this study is to see how a CEO's ethics affects each company's business performance, as the ethical management of global companies are being one of the social issues at this time, particularly in construction companies. The survey was conducted amongst the engineers and managers who are currently engaged in domestic major companies as well as small businesses, and analyzed based on the frequency, reliability, factor, and multiple regression method. The results are as follows by use of SPSS 20 as a statistical analysis tool. CEO's ethics has a positive effect on financial performance, business ethics, organizational achievement, social achievement. The study found that the higher ethical sense a CEO has, which is one of the highest values of CEO, the higher ownership an employee has, and the more a CEO has a communication with the employees, the more credibility is mutually built, which will be a driving force of company's development. This study needs more wide study for on the effect of CEO's ethics on the business performance of general company in the future.