• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1240-1246
• /
• 2010

Enthalpy probe with the inner and outer diameters of 1.5 mm and 4.8 mm, respectively, is designed and used to measure the temperatures and velocities along the centerline of Ar arc plasma flow until the probe was destroyed. For this purpose, Ar arc plasma flow is generated by non-transferred type DC arc heater with the power level of 17 kW. From this experiment, it is shown that the designed enthalpy probe can measure the temperature and velocity of arc plasma flow up to 12,000 K and 600 m/s, respectively, without destroy of probe tip. In this extreme case, the arc plasma flow is calculated to transfer the heat flux of ${\sim}5{\times}10^7\;W/m^2$ to the probe based on the heat and thermal boundary equations near the forward stagnation point of a body immersed in arc plasma flow. Consequently, the designed enthalpy probe can measure the wide ranges of plasma temperatures, velocities and concentrations simultaneously, which are generated by various types of arc heaters within the heat flux ranges of $0{\sim}5{\times}10^7\;W/m^2$ on the probe tip.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.89-89
• /
• 2000

AlN 박막은 Al과 N원자의 부분적 이온결합 특성을 가진 공유결합을 한 육방정계의 wurtzite 경정구조의 화합물 반도체로서, III-V족 반도체 중 가장 큰 에너지 갭(6.2 eV), 결정 구조적 이방성, 화학 양론적 결합구조, 높은 탄성종과 전달속도(약 10$\times$106 m/s)와 높은 열전도도, 고온 안정성, 가시광성.적외선 영역에서의 좋은 투과성과 높은 굴절률, 상온 대기압에서의 유일하게 안정적인 특성을 가지고 있어, 절연재료, 내열재료, 저주파 영역 센서의 압전 트랜스듀서, 광전소자, 탄성파 소자 및 내환경 소자, MIS소자 등으로 주목받고 있다. 본 연구에서는 BAW 공진기의 활용을 목적으로 반응성 마그네트론 스퍼터링 방법으로 AIN 압전박막을 제작하여, 증착 조건-질소 농도, 고주파 출력, 전체 스퍼터링 압력, 기판 온도-에 대한 박막의 특성을 조사하였다. AlN 박막의 c축 우선 방위 결정성 및 낮은 투과성, 적당한 굴절률의 특성이 BAW 공진기의 활용을 위한 요건이므로, 각각의 증착 조건하에 제작된 박막은 XRD의 $\theta$/2$\theta$ 스캔 회절상에 의한 결정성의 분석과 우선 성장 결정면의 rocking curve 및 XRD로 측정한 FWHM과 표준 편차로 결정성의 배열성과 소자 응용가능성을 조사하였다. 박막의 표면.단면 미세 구조 및 평활도는 SEM으로 관찰하였으며, Al-N 결합 상태는 XPS와 FT-IR로 분석 조사하였다. 제작된 AlN 박막의 결정성 분석 결과, c축 우선 방위 성장을 위한 스퍼터링 압력에 대한 임계 질소 농도와 임계 스퍼터링 압력이 관찰되었다. 전체 스퍼터링 압력이 6~8 mTorr의 범위에서 나타난 최소 임계질소 농도는 10%, 최대 임계 질소 농도는 60%이며, 4 m Torr 이하 10 m Torr 이상의 전체 스퍼터링 압력에서 박막의 우선 방위성장이 제재된다. 이는 AlN 박막이 형성에 관여하는 질소 이온 양의 충분한 형성에 필요로 하는 질소 가스의 유입량에 따른 것으로 판단된다. AlN 박막의 c축 결정면인 (002) 결정면의 성장을 유도하며 다른 방향으로의 성장을 제어하여 소자 활용에 유용한 박막을 제작하기 위한 고주파 출력은 300W 정도가 적당하며, 기판을 가열하지 않았을 때 낮은 투과도를 나타낸다. 본 연구에 의한 BAW 공진기 활용을 위한 AlN 압전박막의 제작을 위한 최적 증착 조건은 기판의 가열 없이 6~8 mTorr의 전체 스퍼터링 압력에 20~25%의 질소종도, 300W의 고주파 출력이다. 최적 조건에서의 AlN 박막은 약 0.19$^{\circ}$의 FWHM과 약 0.08$^{\circ}$의 표준편차를 가지며, 균일하고 조밀한 표면 미세구조와 주상정 구조의 측면구조, 파장에 대한 약 2.0의 굴절률, 낮은 투과도와 화학 양론적 구조를 가지는 우수한 박막이 형성되었다.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.2
• /
• pp.393-397
• /
• 2012

This study developed a rapid egg-salting method using a temperature change in NaCl solution under pressure. The permeation effects(PEs) of NaCl into eggs at ambient pressure were analyzed 1) after soaking them in 20, 30, or 40%(w/v) NaCl solution at $50^{\circ}C$ and 2) after soaking in 20~40% concentrations(w/v) of NaCl solution at $4^{\circ}C$ immediately after soaking at $50^{\circ}C$ for 1 hr(temperature change method; TCM). Under permeation conditions(40% NaCl solution with TCM), the PE of NaCl into eggs at various pressures(4.0~7.0 MPa) was determined. The PE improved with increasing NaCl concentration and pressure. In 40%(w/v) NaCl solution, the PE was more rapid with TCM(0.70% for 2 hr) than without TCM(0.60% for 2 hr). At 7.0 MPa pressure, the PE was more rapid with TCM(1.66% for 15 min) than without TCM(1.40% for 15 min). These results suggest that the TCM-induced contraction of the egg membrane improved the PE. Therefore, we believe that the development of a rapid salting method for seasoning eggs is possible with the TCM.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.511-516
• /
• 1992

The x-values of the nonstoichiometric compound YbO$_x$ have been measured in a temperature range of 600 to 1150$^{\circ}C$ under oxygen partial pressure of 1.00 ${\times}$ 10$^{-2}$ atm∼atmospheric air pressure. The values are varied between 1.55453 and 1.60794 in the conditions. The enthalpy of the formation for x' in YbO$_{1.5＋x'}$(${\Delta}$H$_f$) was 1.55, 1.18, and 1.05 kJ/mol under the above conditions, respectively. The electrical conductivities of the oxides or ${\sigma}$ have been measured in the temperature range from 600 to 1100$^{\circ}C$ under oxygen partial pressure of 1.00 ${\times}$ 10$^{-5}$ ∼ 2.00 ${\times}$ 10$^{-1}$ atm. They varied from 10$^{-9}$ to 10$^{-5}$ ohm$^{-1}$ cm$^{-1}$ within the semiconductor range. The Arrhenius plots of the electrical conductivities show a linearity and the activation energy for the conduction was about 1.7eV. The oxygen partial pressure dependence of the conductivity or 1/n value increases with the pressure. The nonstoichiometric conduction mechanism of the oxide was discussed in terms of the x values, ${\sigma}$ values, and the thermodynamic data.

• Journal of Radiation Protection and Research
• /
• v.37 no.3
• /
• pp.149-158
• /
• 2012

In this paper, we measured the variations of radon concentrations in groundwater using low-level Liquid Scintillation Counter (LSC), an instrument for analyzing the alpha and beta radionuclides at its 10 sites around the Kumjung-Gu, north-western of Busan. Optimization of Pulse Shape Analyzer (PSA) to determinate the highest value of figure of merit (FM) was decided using Quantulus 1200 LSC with radium-226 source, the optimal PSA level was shown in the range of 100 to 110. The results show that the Minimum Detectable Activity (MDA) of radon concentrations is 0.61 $Bq{\cdot}L^{-1}$ for 20 minutes in PSA level. We find that the average radon concentration in groundwater is high in granitic rock area and low in volcanic rock area. (Biotite granite : 191.39 $Bq{\cdot}L^{-1}$, Micro graphic granite : 141.88 $Bq{\cdot}L^{-1}$, Adamellite : 92.94 $Bq{\cdot}L^{-1}$, Andesite (volcanic) : 35.35 $Bq{\cdot}L^{-1}$). No significant seasonal variation pattern is observed from the long-term variation analysis from 10 selected sites. We have not seen the significant correlation of radon concentration to groundwater temperature, atmospheric temperature, atmospheric pressure and rainfall. The concentration variation is probably caused by more complex factors and processes.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.6
• /
• pp.71-79
• /
• 2012

Sand compaction pile and stone column replacement methods have been commonly used for improving soft ground in the nearshore. Recently, DCM (Deep cement mixing) method, which can harden soft clays by mixing with cement, is more popularly used in such soft ground improvement. Sandy soils also exist in the seashore. Therefore, in this study, the effect of salinity in sea water and curing methods on the strength of cemented sand was evaluated in terms of unconfined compressive strength (UCS). The sand was mixed with five different cement ratios and distilled water or sea water, and then compacted into a cylindrical specimen. They were cured for 3 days under sea water for DCM construction condition and air cured for onshore curing condition. When a specimen was cured under sea water without confinement, it was easily collapsed due to initiation of cracks. When the cement ratio and curing method were the same, the UCS of the specimen without sea water was at maximum 3.5 times higher than those with sea water. The sea water used for mixing sand had more influence on strength reduction than the sea water used for curing. When the cement ratio was the same, the UCS of air-cured specimen was at average 2 times higher than those of water-cured specimen, regardless of water used.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.40-45
• /
• 2013

Satellite's infrared detector shall be calibrated under thermal vacuum environment using a reference black body before a launch. The full aperture black body (FABB) as an infrared calibration reference shall be composed of vacuum compatible materials and temperature controlled from $-40^{\circ}C$ to $+40^{\circ}C$ with emissivity higher than 0.95. The temperature homogeneity over the central 80 % area of the FABB front surface shall be better than 2 K. The FABB designed by thermal and flow analysis was $1m{\times}1m{\times}8mm$ copper plate on which black painted aluminum honeycomb core was attached. Copper tubes were welded on the opposite side of the honeycomb core to allow temperature regulated gaseous nitrogen to flow through them. By the FABB validation test, the temperature homogeneity was observed around 1 K using 20 PT100 sensors and modified COTS infrared camera. The emissivity value was 0.975 at $40^{\circ}C$ under atmospheric pressure.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.491-497
• /
• 1987

$ThO_2-Tm_2O_3$ (TDT) solid solutions containing 1,3,5,8,10, and 15 mol% $Tm_2O_3$ were synthesized from spectroscopically pure $ThO_2$ and $Tm_2O_3$ polycrystalline powders. The TDT solid solutions were indentified to the fluorite structure by the X-ray powder technique. The values of the lattice parameter were decreased with increasing amount of $Tm_2O_3$ incorporated. But, there was no linearity for the samples containing 8, 10, and 15 mol% $Tm_2O_3$. It was concluded that these samples became incomplete solid solutions. From the intensity analyses of X-ray diffraction patterns, the residual factor was found below 0.13 even for the 15 mol% TDT system. lt was confirmed from the DTA and TGA analyses that any phase transitions did not occur under the experimental condition executed. Comparing the pycnometric density with the lattice parameter obtained from XRD, it was suggested that the predominant defect model be an oxygen vacancy.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.270-277
• /
• 2008

Vacuum is any air or gas pressure less than a prevailing pressure in an environmental or, specifically, any pressure lower than the atmospheric pressure and is used by a wide variety of scientists and engineering - including clean environment, thermal insulation, very long mean free path, plasma, space simulation[1]. The space environment is characterized by such a severe condition as high vacuum, and very low and high temperature. Since a satellite will be exposed to such a space environment as soon as it goes into its orbit, space environmental test should be carried out to verify the performance of the satellite on the ground under the space environmental conditions. A general and widely used method to simulate the space environment is using a thermal vacuum chamber which consists of vacuum vessel and thermally controlled shroud. As indicated by name of vacuum chamber, the vacuum technology is applied to design and manufacture of the thermal vacuum chamber. This paper describe the vacuum technology which is applied to space business.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1775-1781
• /
• 2008

The effects of the type of curing agent on the swelling of the natural rubber(NR) sponge applicable to the self-sealing layer of a helicopter fuel tank were investigated. The curing systems employed were peroxide and mixed ones of sulfur and peroxide. The NR compounds were prepared in a kneader and a roll-mill. The compounds were partially cured in a press at high pressure and subsequently cured fully with expansion in another press at atmospheric pressure. The apparent density of the NR sponge was measured and the cell structure was observed with scanning electron microscopy. The swelling experiments were performed at room temperature using toluene, iso-octane, and an aircraft fuel as a solvent. More rapid volume swelling of the NR sponge cured by peroxide was achieved than cured by sulfur and peroxide with similar amount of curing agent added in rubber compounds. The apparent density and cell structure of the sponge were extremely sensitive to the amount of peroxide, which influences again the swelling behavior of the NR sponge. It is important to control properly two reactions of decomposition of foaming agent and crosslinking of NR in the mold to obtain rapid swelling of the NR sponge on contact of the fuel.