• 제목/요약/키워드: 대기모드

검색결과 180건 처리시간 0.03초

운용모드에 따른 과학기술위성2호의 전력 수요예측 분석 (Power Budget Analysis for STSAT-2 According to the Operation Mode)

  • 신구환;남명용;임종태
    • 한국항공우주학회지
    • /
    • 제33권3호
    • /
    • pp.93-98
    • /
    • 2005
  • 과학기술위성2호는 2007년 12월에 발사될 예정이다. 이 위성의 주관측기는 DREAM으로서, 주요 임무는 지구 또는 대기로부터 발생되는 복사에너지를 라디오파 대역에서 관측하는 것이다. 이 외 과학기술위성2호는 과학기술 실험용기기로서 정밀디지탈 태양센서, 2중헤드 별센서 등이 탑재되며, 과학기술위성2호의 자세제어 및 모멘텀 덤핑용 과학기술실험용 탑재체로서 펄스형 플라즈마 추력기가 실린다. 본 논문에서는 관측기기 및 과학기술실험용 탑재체 등의 운용모드를 고려한 과학기술위성2호의 운용모드에 따른 전력의 수요예측에 대하여 연구하였고, 임무를 수행하는 동안 안정적인 전력을 공급하기위한 필요전력에 대하여 분석하였다.

외부 입력기기 사용 정보 기반 셋톱박스 대기모드 전환 기술 (A Standby Mode Transition Scheme for Set-top Box Power Saving by the Use Information of External Device)

  • 김용호;최윤범;오남걸;김훈
    • 정보통신설비학회논문지
    • /
    • 제9권4호
    • /
    • pp.124-130
    • /
    • 2010
  • This paper considers a power saving technique of set-top box (STB) that turns the signal into content which is then displayed on the television (TV) screen. A traditional power saving scheme, Auto Power Down (APD), was devised to reduce the power consumption of STB. APD checks whether the user is watching TV over a period of time and enforces STB into stand-by mode when the check result reveals the user is not watching TV. This paper proposes an enhanced power saving scheme that transits STB operation mode to 'stand-by' immediately when STB recognizes the change of TV's external input signal. The proposed scheme does not require the monitoring time to check the users' watching TV, and transits to standby mode faster than the conventional APD, which results in better performance in power saving. The simulation result shows that the proposed scheme achieves 2 to 11% improvement in power consumption compared with the conventional APD.

  • PDF

스위치 전도 손실을 개선한 인터리브 DC-DC 벅-부스트 컨버터 설계 (A Design of Interleaved DC-DC Buck-boost Converter with Improved Conduction Loss of Switch)

  • 이주영;주환규;이현덕;양일석;구용서
    • 전기전자학회논문지
    • /
    • 제14권3호
    • /
    • pp.250-255
    • /
    • 2010
  • 본 논문에서는 DTMOS(Dynamic Threshold voltage MOSFET) 스위칭 소자를 사용한 인터리브 방식의 전원제어 장치(PMIC)를 제안하였다. 휴대기기에 필요한 높은 출력 전압과 낮은 출력 전압을 제공하기 위하여 벅-부스트 컨버터를 사용하였다. 또한, 높은 출력 전류에서 고 전력 효율을 얻기 위하여 PWM(Pulse Width Modulation) 제어 방식을 사용하였다. 낮은 온-저항을 갖는 DTMOS를 사용하여 도통 손실을 감소시켰으며 인터리브 방식을 사용하여 출력 리플을 감소시켰다. 1mA 이하의 대기모드에서도 높은 효율을 구현하기 위하여 LDO를 설계하였다.

PACDEX 캠페인 자료로 분석한 블랙카본을 포함한 축적모드 에어로솔의 구름응결핵 가능성 (Capability of Accumulation Mode Aerosols Containing Black Carbon as CCN Observed during the PACDEX Campaign)

  • 이시혜;김영성;김상우;윤순창
    • 한국대기환경학회지
    • /
    • 제26권4호
    • /
    • pp.380-391
    • /
    • 2010
  • Airborne in-situ measurements of aerosol/cloud number concentrations were analyzed to investigate the effects of aerosols on warm cloud formation in the Pacific Dust Experiment (PACDEX) during April and May 2007. In the air masses originating from the Asian continent, high concentrations of fine particles including black carbon (BC) were observed when compared to other regions. A strong correlation (r=0.88) between condensation nuclei (CN) having sizes ranging from 0.1 to 1.0 mm ($CN_{0.1-1.0}$) and cloud condensation nuclei (CCN) at 0.4% supersaturation ($CCN_{0.4%}$) suggests that most of the $CN_{0.1-1.0}$ can contribute to cloud formation. The possibility of a cloud droplet formation by BC particles was expected at the high water vapor mixing ratio (WVMR) and the abundance of water-soluble components at the low altitude less than 3 km.

국내에서 운영중인 시내버스의 시험모드에 따른 배출특성 비교 연구 (A Study on the Comparison of Emission Characteristics of In-Use Urban Bus by Test Modes)

  • 전상우;엄명도;홍지형
    • 한국대기환경학회지
    • /
    • 제26권4호
    • /
    • pp.403-411
    • /
    • 2010
  • Recently, emission tests for heavy-duty vehicles have been conducted by heavy-duty engine dynamometer. But, it contains weaknesses that present inconveniences to install and uninstall engines and limitations to reflect on practical characteristics for vehicle driving. On the other hand, chassis dynamometer test is able to differentiate characteristics of real driving patterns due to the reason that vehicles can be examined by utilizing chassis dynamometer. This study aimed at comparing the characteristic of emitting regulatory substances of urban buses on Heavy-duty chassis dynamometer. The characteristic was analyzed based on vehicle speed by using both domestic and overseas developed heavy-duty vehicle test modes. As a result, this work attempted to investigate possibilities to take advantage of Heavy-duty vehicle test modes as a method to manage emissions from heavy-duty vehicles.

역류 흐름 검출기능을 갖는 무선 디지털 원격 수도검침기 설계 (A Design of RF Digital Remote Water Gauge with Counterflow Detection Capability)

  • 남종현;이재민
    • 디지털콘텐츠학회 논문지
    • /
    • 제16권1호
    • /
    • pp.97-104
    • /
    • 2015
  • 기존의 1구 홀센서 방식의 수도 검침기는 역류 감지와 저속 흐름 감지가 어렵고 대기상태에서 전력 소모가 발생하는 등의 문제점을 가지고 있다. 본 논문에서는 3개의 홀센서를 $120^{\circ}$간격으로 배치해 유량의 흐름을 감지하고 유량의 방향을 검출하여 국가 기술 표준 작동연한 (8년)을 충족하는 역류 검출기능을 갖는 무선 디지털 원격 수도 검침기를 제안한다. 제안하는 검침기의 동작 알고리듬은 3개의 홀센서가 유량의 속도에 상관없이 동작하며 오차없이 유량을 카운트 하도록 구성하며 홀센서에 이벤트 발생 시 RF 모듈을 통해 지정한 주파수로 수도 검침기의 ID, 현재 시간 그리고 카운트 값을 중계기 또는 중앙 관제센터에 보내고 대기모드에서 전력이 소비되지 않게 한다.

대기광 관측을 통한 과학기술위성 1호 원자외선분광기(FIMS)의 파장 보정 (FIMS WAVELENGTH CALIBRATION VIA AIRGLOW LINE OBSERVATIONS)

  • 이대희;선광일;박장현;진호;육인수;남욱원;한원용;박재우;이지나;유광선;민경욱
    • Journal of Astronomy and Space Sciences
    • /
    • 제21권4호
    • /
    • pp.391-398
    • /
    • 2004
  • 2003년 9월 27일 과학기술위성 1호가 성공적으로 발사된 이래, 주탑재체인 원자외선분광기(Far-ultraviolet Imaging Spectrograph, FIMS)는 초기 운용 모드를 거쳐 현재까지 정상 관측을 수행하고 있다. FIMS는 전천관측을 통해 우리은하의 뜨거운 가스의 분포를 측정하고 있으며, 초신성 잔해 및 성간운의 수소 방출선, 그리고 지구 대기의 대기광 등에 대한 관측을 수행하고 있다. FIMS의 광학계 및 검출기는 지상에서 특성 평가 및 보정을 마쳤지만, 우주 발사 과정의 진동에 의한 효과, 우주 환경에의 노출 등에 의한 효과로 인해 궤도상 보정이 필수적이다. 한편, 지구 대기에는 수소 및 질소 분자 등이 태양빛을 받아 강한 방출선들을 내는데 이들은 파장 보정의 좋은 기준선들이 된다. 이 논문에서 우리는 FIMS로 대기광 방출선들을 관측하였고, 관측된 방출선을 검출기의 위치에 따라 모델 스펙트럼과 비교하여 그 차이를 구하였으며, 이것을 보정시킴으로써 FIMS의 장파장에서의 분해능 및 정확도를 향상시키는데 기여하였다.

SiC MOSFET을 이용한 DC Nano-grid용 25kW급 양방향 컨버터 개발 (Development of 25kW Bi-directional Converter using SiC MOSFET for DC Nano-grid)

  • 김연우;한병길;김민재;최세완;양대기;김민국;오성진
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2016년도 전력전자학술대회 논문집
    • /
    • pp.44-45
    • /
    • 2016
  • 본 논문에서는 DC Nano-grid를 위한 25kW급 고효율 양방향 컨버터를 개발하였다. 제안하는 양방향 컨버터는 넓은 입력전압 범위를 만족하기 위하여 Cascade 부스트-벅 컨버터의 구조로 하였으며 상용화된 SiC MosFET기반 3레그 IPM을 최적으로 사용하기 위해 2상 인터리빙 부스트 컨버터와 단상 벅 컨버터로 하였다. 또한 승 강압 모드에 따라 스위칭하는 스위치 개수를 감소시켜 스위칭 손실을 최소화 하였다. 25kW 시작품을 통해 14kW에서 효율 98.9%를 달성하였다.

  • PDF

철도신호 대기이중중계구조 제어기의 향상된 신뢰도평가방법에 관한 연구 (A Study on the Advanced Reliability Assessment Method about Hot-Standby Sparing System for Railway Signaling)

  • 민근홍;이종우
    • 전기학회논문지
    • /
    • 제56권9호
    • /
    • pp.1589-1595
    • /
    • 2007
  • This paper suggests the advanced reliability assessment tool for railway signaling Hot-Standby sparing system. Existing reliability assessment for Hot-Standby sparing system controller is done by using single module mean failure rate based on approximated Hot standby sparing system function. Although approximated Hot standby sparing system function can be applied to various Hot standby sparing system, however, it is not able to reflect the exact system structure. In this paper, we suggest the advanced reliability function by identifying changeover-related failure factors and common failure mode which is not considered in existing approximated Hot standby sparing system reliability function via developing Hot standby sparing system model for railway signaling and applying FMECA to this model. Also. we compare reliability assessment results for model system to reliability assessment for existing system.

AlGaN/GaInN 이중 이종접합구조의 광여기 유도방출과 편광특성 (Poperties of Optically Pumped Stimulated Emission and its Polarization from an AlGaN/GaInN Double Heterostructure)

  • 김선태;문동찬
    • 한국재료학회지
    • /
    • 제5권4호
    • /
    • pp.420-425
    • /
    • 1995
  • AlGaN/GaInN 이중이종접합구조(double heterostructure :DH)를 대기압 유기금속기상에 피텍셜(MOVPE)법으로 AIN 와충층을 이용하여 사파이어 기판위에 성장하고, 실온에서의 광여기법에 의한 청색영역의 단면모드 유도방출특성과 편광특성을 조사하였다. 여기광원의 광밀도가 증가함에 따라 청색 영역에서의 유도방출 피크는 낮은 에너지 쪽으로 이동하였고, 유도방출 피크파장은 여기광밀도가 200kW/$cm^{2}$일때 402nm 이었으며, 스펙트럼의 반치폭은 18meV 이었다. 또한 유도방출에 필요한 여기광밀도의 임계치는 130 kW/$cm^{2}$ 이었다. AlGaN/GaInN로부터 방출되는 유도방출 광은 임계치 이상에서 TE-mode로 편광 되었다.

  • PDF