• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.323-324
• /
• 2006

This study is described the modeling of aspheric lens, manufacturing and inspection. The aspheric lens is different from a convex lens and concave lens in that is useful to aspherical, but modeling mettled of this isn't open to the public. Therefore, This study is designed to the aspheric lens of geometric form, manufactured a sample by CAM which is applied to Euler method. So, we have verified modeling and CAM process for aspheric lens through a experiment.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1500-1505
• /
• 2010

The objective of this study is controlling of the large diameter Shield TBM excavation for subway tunnels. In this paper, it will focus on the selection of Shield TBM and the problems of excavation due to unusual abrasion of the Disk Cutters and the distorted Cutter Mounts, in mixed layer of soil in below and hard rock in above, and in rock layer. And also, it will be discussed that the type of ground improvement to change and repair the Disk Cutters and the distorted Cutter Mounts, Advance Rate, Cutter Torque, etc. The results of this study will be using controlling of the excavation in various large diameter Shield TBM for subway tunnels.

• Explosives and Blasting
• /
• v.19 no.1
• /
• pp.53-62
• /
• 2001

주변 보안물건에 직전각인 피해를 유발시킬 수 있는 발파진동은 암반의 파쇄를 위해 화약의 폭박력을 이용하는 발파작업에서 발생하는 대표적인 발파공해로 이러한 발파진동을 저감시키기 위한 많은 연구들이 수행된 바 있다. 본 연구에서는 2자유면 발파시 최소저항선과 대구경 무장약공을 자유면으로 활용하는 터널 심발발파시 무장약공과 첫 번째 심발발파공의 중심사이 거리가 발파진동에 영향을 정량적으로 평가하기 위해 균질한 모르타르 시험체에 대한 소규모 단일공 시험발파를 수행하였다. 11g의 화약을 장약한 2자유면 단일공 시험발파시 발파진동의 크기는 최소저항선을 표준장약의 경우인 150mm에서 2/3 수준인 100mm로 줄인 경우 삼승근 환산거리 $10~40{\;}m/kg^{1/3}$인 범위에서 약 13~38% 작아지는 것으로 나타났다. 또한 직경이 180mm인 무장약공을 자유면으로 활용하는 첫 번째 심발 시험발파공에 22g의 화약을 장약하여 수행한 단일공 시험발파시 무장 약공 중심으로부터 발파공 중심까지의 공간격이 짧아질수록 발파진동이 더 작아지는 것으로 나타났다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.9
• /
• pp.593-598
• /
• 2015

In this paper, the silencer for large caliber gun to reduce the propagation of gun-generated noise was studied. The results of structural analysis and firing test were described. Structural analysis was conducted by using a commercial program, ANSYS, and showed that there was not any structural problem. The sound pressure level was diminished about 10 dB by the silencer adapted in front of the gun and the soundness of the material was verified from the internal pressure measurement. The reduction of weight, improvement of durability and speed-up of actuating device have to be studied later to improve the usability of silencer for large caliber gun.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.291-298
• /
• 2001

It is very difficult to accomplish load tests of piles with large diameter constructed on the offshore area, because of requirement for large scaled loading equipment and bad testing conditions. Therefore, so far in many cases pile driving dynamic formulas have applied to quality control, and recently dynamic load test method is widely used for confirming bearing capacities of such piles. However, in cases of piles with very large diameter about 2,500mm, it is nearly impossible for regular type load test methods of piles such as static and dynamic to apply owing to very large design load. This is case studies of load tests such as modified static and dynamic load tests of piles and point load tests of rock samples for estimating rational allowable bearing capacity of very large diameter piles constructed on the marine area.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.200-201
• /
• 2017

Generally, a lot of reinforcements are used in nuclear power plant concrete structures, and it may cause several potential problems when concrete is poured. Because of the congestion caused by hooked bars, embedded materials, and other reinforcements, it is too difficult to pour concrete into structural member joint area. The purpose of this study is to change ACI 349 Code for using the large-size(57mm) and high-strength(Gr.80) headed deformed bars instead of standard hooked bars in nuclear power plant concrete structures in order to solve the congestion problems.

• The Optical Journal
• /
• s.131
• /
• pp.32-33
• /
• 2011

(주)포로옵틱스(대표 정진호, www.prooptics.co.kr)가 지난 1월 19일 산학연 인사들을 초청하여 신사옥 준공식 행사를 가졌다. 2005년 12월 지금의 이천시 부발읍에 사옥 준공식을 가진 후 5년 만에 사세 확장과 함께 신사옥을 완공한 이 회사는 오는 3월 창립 10주년을 앞두고 10주년 기념식도 겸하여 더욱 뜻 깊은 자리가 되었다. 280여 평 규모로 지어진 신사옥에서는 3D 광학계를 비롯하여 초정밀 대구경 비구면 렌즈 가공을 통해 초고미세 노광광학계, 천체 망원경 및 인공위성 광학계를 생산할 수 있는 기반을 구축하게 됐다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.526-532
• /
• 2009

말뚝의 정재하시험을 통하여 항복하중 및 극한하중을 판별하는 다양한 방법이 제안되어 왔다. 말뚝의 지지력은 주면마찰력과 선단지지력의 합으로 나타내어 왔으나 말뚝 재하시험을 통한 항복 하중 및 극한하중의 판별법은 대체로 총 침하량에 대해 판별하거나 재하하중-침하 그래프로부터 산정되는 경우가 대표적이다. 본 연구에서는 현장 대구경 양방향 재하시험 결과를 활용하여 말뚝의 주면부와 선단부로 나누어 항복하중을 판별할 수 있는 방법을 제안하고자 한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.99-100
• /
• 2018

Because of the congestion problems, the high-strength reinforcements are expected to be used in nuclear power plant structures in the near future. According to ACI 349-13, it is permitted to use the high-strength(550MPa) hooked bars in design of development length, but there is no special equation for high-strength bars. In order to reflect the anchorage capacity and behavior properties of high-strength bars with large-diameter(43 & 57mm), it is necessary to develope the new development length equation for large-size and high-strength bars.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.10a
• /
• pp.61-67
• /
• 1995

The steam generator, one of the major components in the reactor coolant system, plays an important role in transferring the thermal energy made in the reactor during normal operation to the secondary side and producing steam to drive turbine. A hydraulic snubber system is used in order to protect the steam generator under the dynamic loading condition and to absorb the thermal expansion transmitted by the reactor coolant piping due to high temperature and pressure during normal operation. In this study, the model for a geometrical linkage system is presented to analyze the snubber stroke of the steam generator and the parameters in the snubber stroke analysis are investigated. A method to analyze lever ratio of the linkage system which is required in the process of determining the snubber stiffness value is also presented. To discuss the validation of the suggested analysis, the analysis results are compared with the measured data during the hot functional test for the standardized 1000 Mwe pressurized water reactor plant under the construction.