• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.321-325
• /
• 2008

In this paper, heat transfer changes due to the shock/boundary layer interaction were investigated on surfaces where secondary jet are injected. With an infra-red thermography, surface temperature was measured and the measured data was used to obtain the convective heat transfer. Heat transfer is enhanced with increment of momentum ratio. And normal injection case has a higher heat transfer value than that of 15 degrees inclined injection case. Secondary injection momentum ratio and injection angle affect the surface heat transfer distribution.

• Journal of Biosystems Engineering
• /
• v.12 no.4
• /
• pp.22-30
• /
• 1987

실린더로부터 Prandtl수가 0.7인 주변공기로 전달되는 혼합대류 열전달현상을 Stream-Vorticity 함수로 표시된 재배방정식으로부터 유한차분법으로 분석하였다. Nusselt수와 실린더 주변의 온도분포가 조사된 제1편에 이어 Reynolds수와 Gradhof수가 실린더 주변의 공기속도분포, 경계층 박리지점(Separation point), 실린더 표면에서의 마찰계수 및 실린더 주변에서의 압력분포에 미치는 영향을 분석하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.2
• /
• pp.47-53
• /
• 2007

Convective heat transfer coefficient was measured around a circular secondary jet ejected into the supersonic flow field. The wall temperature measurement around a injection nozzle was conducted using infra-red camera. The constant heat flux is applied to the wall around a secondary nozzle. According to jet to freestream momentum ratio, the injection flow penetrates into the supersonic flow field. The measured temperature is used to calculate the convective heat transfer coefficient.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.276-280
• /
• 2007

In this paper, heat transfer changes due to the shock/boundary layer interaction were investigated on surfaces where protruding bodies such as a cylinder and a secondary jet are mounted. With an infra-red thermography, surface temperature was measured and the measured data was used to obtain the convective heat transfer. Heat transfer phenomena around these two solid and fluid bodies were appeared to be very comparable each other. The inclination of a cylinder and the jet injection ratio were the important factors for the change of heat transfer on the effective surfaces.

• Journal of Biosystems Engineering
• /
• v.11 no.1
• /
• pp.37-51
• /
• 1986

실린더로 부터 Prandtl수가 0.7인 주변공기로 전달되는 혼합대류 열전달현상이 Stream-Vorticitv 함수로 표시된 지배방정식으로 부터 유한차분법에 의해 분석되어졌다. Reynolds수와 Grashof수의 함수로서 혼합대류 열전달에서 Nusselt수의 값들이 조사되어 졌으며 이들로부터 순수자연대류와 혼합대류, 혼합대류와 순수강제대류사이의 범위를 정하였다. 그 외에도 본 연구에서는 실린더주변의 온도분포와, 공기속도분포, 속도분리점(Separation point), 마찰계수, 압력분포등이 조사되어졌으나 제 1편에서는 Nusselt수와 온도분포만이 연구결과로 주어 졌으며, 본시험의 이론적 결과치들은 발표된 실험치들과 잘 일치하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.353-356
• /
• 2006

Convective heat transfer coefficient was measured around a secondary jet ejected into the supersonic flow field. Wall temperature distribution was measured on the surface, which the constant heat flux condition is applied. According to jet to freestream momentum ratio, the secondary flow was penetrated into the supersonic flow field. During the test, two dimensional thermal image of a wall temperature is taken by an infra-red camera. Experiments were performed under the testing condition of freestream Mach number of about 3, stagnation pressure of 630 kPa and Reynolds number of $3.0{\times}10^6$.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2000.09a
• /
• pp.37-46
• /
• 2000

한반도 주변해역은 고조위와 태풍의 내습에 의한 강한 파랑으로 특징지워진다. 저조위때에 나타나는 1700$\textrm{km}^2$에 달하는 갯벌로 이루어진 서해안과 황해 동쪽 지역의 해안의 조건은 경기만에 l0m 범위의 높은 조위 차와 동계 계절풍과 태풍으로 인한 4-5m에 달하는 높은 파고를 발생시키는 고에너지와 높은 탁도 환경을 만들어 내는 매개체가 된다. (중략)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.11
• /
• pp.719-726
• /
• 2017

An experimental study was performed to investigate the combined effects of the pitch and heat flux of nearby tubes on boiling in a pool as well as the heat transfer from a horizontally-installed tube bundle. For this test, two smooth stainless steel tubes (19 mm outside diameter) were used, and the water was at atmospheric pressure. The pitch of these tubes was varied between 28.5 mm and 95 mm, and the heat flux of the nearby tube altered between 0 and $90kW/m^2$. Enhancements in heat transfer were clearly observed when the heat flux of the nearby tube increased while the heat flux of the test section remained below $40kW/m^2$. The tube pitch was found to have a negligible effect on heat transfer when the pitch was greater than four times larger than the tube diameter. The circulating flow, convective flow, and liquid agitation were all seen to enhance heat transfer; however, the interaction between the flow and coalescence of bubbles was detrimental to heat transfer.

• Publications of The Korean Astronomical Society
• /
• v.3 no.1
• /
• pp.1-11
• /
• 1987

달가림 관측을 목적으로 고속계수기를 설계, 제작하였다. 이 계수기는 외부 관측소로의 이동성, 비용의 절감, 제작의 편의성을 고려하여 애플 주변슬롯에 꽂히는 카드형식으로 설계되었으며, 운영을 위한 프로그램은 어셈블러로 작성되었다.

• Journal of the Speleological Society of Korea
• /
• v.32 no.33
• /
• pp.47-62
• /
• 1993

충주댐은 1978년에 착공하여 1985년에 완공된 것으로 유역면적은 6,664$\textrm{km}^2$이고, 총저수량은 27억 5천만㎥에 달한다(건설부, 1987). 고수동굴은 이러한 충주호 주변에 위치하고 있으며, 현재 충주호권 내에 속하고 있다. 특히 이 주변지역은 충주댐의 건설로 인한 주변지역의 교통과 관광적 측면에서 많은 환경변화를 초래한 지역으로 고수동굴도 이러한 지역 환경의 변화에 따라 교통과 관광측면에서 많은 변화를 보이고 있다. 따라서 본 논문은 이렇게 극심한 환경변화와 더불어 관광지로서 급성장된 고수동굴과 주변지역의 교통과 관광 특성을 밝히는 것에 중점을 둔다.(중략)