• Journal of The Korean Society of Integrative Medicine
• /
• v.5 no.3
• /
• pp.63-70
• /
• 2017

Purpose : The purpose of this study was to investigate the effects of the virtual reality exercise program on ankle balance with ankle taping or microwave. Methods : This study was performed on 18 subjects. Eighteen subjects were divided into two groups; conducted virtual reality exercises with taping (n=9), and performed virtual reality exercises after microwave application (n=9). Both groups performed the exercise three times a week for four weeks. The data was analyzed by the Wilcoxon signed-rank test for comparing before and after changes of factors in each group and performed the Mann-Whitney test for comparing groups. Result : Taping and microwave groups were increased dynamic balance after virtual reality exercises (p<.05). There was no significant difference in balance after applying taping and microwave for virtual reality exercises (p<.05). Conclusion : Reducing the frequency of recurrent ankle sprain in functional ankle subjects, it is recommended to perform virtual reality exercise after applying taping and microwave.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.279-279
• /
• 2021

위성영상정보는 센서의 종류, 취득, 분석, 재난과 위성영상 특성 매칭 등의 제약으로 재난 상황에서 제한적으로 사용되었다. 일반적으로 인공위성의 종류는 탑재한 센서의 정보제공 능력 범위에 따라 분류 가능하며 이에 따라 대상 범위가 결정된다. 본 연구에서는 재난의 예측, 탐지, 사후처리를 위한 위성자료의 취득과 활용을 위해 다양한 위성과 탑재된 센서의 궤도, 공간 해상도, 파장대 등의 특성에 대하여 분석하고 재난유형별로 최적 위성영상을 선정하였다. 행정안전부에서는 재난과 재해의 유형을 자연재난(10종)과 사회재난(27종)으로 분류하였다. 위성영상 활용이 가능한 재난 유형은 가시적으로 확인이 가능한 자연재난에 해당하며 그 중 태풍, 홍수, 가뭄, 산불 등 총 4종의 재난유형별로 가용한 최적의 위성영상을 분석하였다. 재난관측에 사용 가능한 대표적인 탑재체의 종류는 극궤도 지구관측 위성에서 광학과 SAR로 구분할 수 있다. 각 기본 특성에 따라 제공되는 정보의 종류가 분류되며 광학 센서는 태양복사 및 지구복사에너지 파장 영역 중 가시광선-근적외선-단파적외선-열적외선 파장대 영역의 분광 정보를 제공할 수 있는 다중 밴드들로 구성된다. 지표의 특정 대상이나 물질을 탐지하고 변화를 감지·분석하는데 유용하여 홍수, 태풍, 지진 등 자연 및 사회 재난·재해 관측에 유용하게 이용된다. SAR 센서는 장파장의 전자기파를 방출한 후 돌아오는 신호를 활용하여 대상에 대한 정보를 획득한다. 대기의 효과 및 요소를 투과하는 주파수 대역별 장파장 밴드 정보를 활용하여 고해상도의 대상 표면, 위치, 형태 등의 정보를 측량 및 관측하므로 중·광역 지역에 제약 없이 영상정보를 획득할 수 있어 산사태, 홍수, 지진, 등의 재난 모니터링에 유용하다. 이러한 다종 위성별 센서들의 특징(공간 해상도, 파장대별 밴드 특성, 관측폭, 재방문 주기 등)들을 분석하여 재난유형별로 가용한 무료/상용 지구관측위성을 분류한 결과 태풍에는 광역관측, 정지궤도 위성, 홍수에는 광학 및 SAR 고해상도 위성, 가뭄은 광역관측, 다분광 광학 위성 그리고 산불에는 정지궤도, 광학, SAR 위성이 적합함을 알 수 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1075-1081
• /
• 2010

Recently, the results of many studies have clarified the successful performance of magnetostrictive transducers in which a ferromagnetic patch is used for the transduction of guided shear waves; this is because a thin ferromagnetic patch with strong magnetostriction is very useful for generating and detecting shear wave. This investigation deals with bulk shear wave transduction by means of magnetostriction; on the other hand, the existing studies have been focused on guided shear waves. A modular transducer was developed; this transducer comprised a coil, magnets, and a thin ferromagnetic patch that was made of Fe-Co alloy. Some experiments were conducted to verify the performance of the developed transducer. Radiation directivity pattern of the developed transducer was obtained, and a test to detect the damage on a side drill hole of a steel block specimen was carried out. From the results of these tests, the good performance of the transducer for nondestructive testing was verified on the basis of the signal-to-noise ratio and narrow beam directivity.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.87-90
• /
• 2015

Equipments that can transmit maritime distress signals in accordance to Global Maritime Distress Safety System are the followings: A1 water(Very High Frequency, SART), A2 water(MF/HF Radio Equipment), A3 water(INMARSAT), A4 water(Emergency Position Indicating Radio Beacon). Institutions with the capacity to receive distress signals are Korea Coast Guard affiliated radio stations, patrol ships, Rescue Coordination centers, Vessel Traffic centers, Complex problems regarding repetitive distress alarms, inaccurate statistics, multiple control towers are existent. Consequently, effective measurement to resolve dispersed operating maritime distress signal system are in time of need. Moreover, current KCG Headquarter is considering to integrate five distress radio stations dispersed across nation into a single international safety communication center. The integration of radio stations are efficient in terms of information coordination between nations, however, it cannot support efficient response to real-time maritime incident. Therefore, in this study, a new system that can rapidly response to real-time maritime incident will be proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.726-732
• /
• 2007

We fabricated UV absorption functional $10{\sim}50nm-TiO_{2-x}/quartz$ structures layer using ALD (atomic layer deposition) method. We deposited $10nm-TiO_{2-x}$ layer on quartz substrate using ALD, and film thickness was determined by an ellipsometer. The others specimen thickness was controlled by ALD time lineally. We characterized controlling phase UV and visible optical property using an X-ray difractometer, a UV-VIS-IR spectrometer and a digital camera. $ALD-TiO_{2-x}$ layers were non-stoichiometric $TiO_{2-x}$ form and amorphous phases comparing with bulk $TiO_2$. While the conventional bulk $TiO_2$ had band gap of $3.0{\sim}3.2eV$ resulting in absorption edges at 380 nm and 415 nm, $ALD-TiO_{2-x}$ layers showed absorption edges at 197 nm and 250 nm. Therefore, our nano-thick $ALD-TiO_{2-x}$ was able to absorb shorter UV region and showed excellent transmittance in visible region. Our result implies that our newly proposed nano-thick $TiO_{2-x}$ using ALD process may improve transmittance in visible rays and be able to absorb shorter UV light effectively.

• Journal of Navigation and Port Research
• /
• v.45 no.1
• /
• pp.26-32
• /
• 2021

In ocean field, the spread of the Fourth Industrial Revolution based on information and communication technology requires high precision and stable PNT&D (Position, Navigation, Timing and Data). As the IMO (International Maritime Organization) and IALA (The International Association of Marine Aids to Navigation and Lighthouse Authorities) are requiring backup systems due to mitigate vulnerabilities and the increase of dependency on GNSS (Global Navigation Satellite System), Korea is conducting a research & development of R-Mode. An DGPS (Differentiate Global Positioning System) reference station that uses MF, an existing maritime infrastructure, and AIS (Automatic Identification System) base stations that use 34 integrity station and VHF will be utilized in this study to avoid redundant investment. Because there are radio shadow areas that display low signal levels in the west sea, the establishment of new R-Mode reference and integrity station will be intended to resolve problems regrading the radio shadow area. Because the frequency has a characteristic in that radio wave transmits well along the ground (water surface) in low frequency band, simulation and measurement were conducted therefore this paper to propose candidate sites for R-Mode reference and integrity station resulted through p wave's propagation characteristics analysis. Using this paper, R-Mode reference and integrity station can be established at appropriate locations to resolve radio shadow areas in other regions.

• Journal of Sensor Science and Technology
• /
• v.10 no.1
• /
• pp.62-70
• /
• 2001

The ZnSe sample grown by chemical bath deposition (CBD) method were annealed in Ar gas at $45^{\circ}C$. Using extrapolation method of X-ray diffraction pattern, it was found to have zinc blend structure whose lattice parameter $a_o$ was $5.6687\;{\AA}$. From Hall effect, the mobility was likely to be decreased by impurity scattering at temperature range from 10 K to 150 K and by lattice scattering at temperature range from 150 K to 293 K. The band gap given by the transmission edge changed from $2.700{\underline{5}}\;eV$ at 293 K to $2.873{\underline{9}}\;eV$ at 10 K. Comparing photocurrent peak position with transmission edge, we could find that photocurrent peaks due to excition electrons from valence band, ${\Gamma}_8$ and ${\Gamma}_7$ and to conduction band ${\Gamma}_6$ were observed at photocurrent spectrum. From the photocurrent spectra by illumination of polarized light on the ZnSe thin film, we have found that values of spin orbit coupling splitting ${\Delta}so$ is $0.098{\underline{1}}\;eV$. From the PL spectra at 10K, the peaks corresponding to free bound excitons and D-A pair and a broad emission band due to SA is identified. The binding energy of the free excitons are determined to be $0.061{\underline{2}}\;eV$ and the dissipation energy of the donor -bound exciton and acceptor-bound exciton to be $0.017{\underline{2}}\;eV$, $0.031{\underline{0}}\;eV$, respectively.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.99-112
• /
• 2020

A edible mushroom, Hypsizygus marmoreus is commercially cultivated. However, the researches of cultivation and physiological characteristics were not conducted in Korea. In this study, we conducted on artificial cultivation of H. marmoreus and elucidated the effect of light on the mycelial growth and fruit body development using LED light sources with different wavelength; blue (peak wave length 460nm), green(peak wave length 530nm), yellow(peak wave length 590nm), red(peak wave length 630nm), and white as positive control. Mycelial growth of H. marmoreus strains were inhibited about 30~40% in inhibition ratio under the illumination with blue, green, yellow LED light. However, red LED light was not inhibited. Elongation of stipe was effective under the long wave length such as yellow and red light. Abnormal fruit body was produced under the long wavelength and dark. However, development of pileus was effective under the short wavelength such as green and blue light. Also, as a result of cultivation with mixed light for high quality and harvest, many effective numbers and yields of fruiting bodies were obtained in the mixed treatment of blue and white light, and pileus developed well.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.202.1-202.1
• /
• 2015

탄소의 $sp^2$ 혼성으로 이루어진 2차원 단일시트(two-dimensional single sheet)인 그래핀은 기계적, 열역학적, 전기적 특성이 매우 우수하며 특히 고유연성과 투명성을 가진다는 장점 때문에 오랜 기간 주목 받으며 다양한 분야에서 연구되어 왔다. 이러한 그래핀을 만드는 방법에는 화학적 증기 증착법 및 흑연으로부터의 물리적, 화학적 박리 방법이 있다. 양질의 그래핀을 대면적에서 획득 할 수 있는 화학적 증기 증착법의 경우 높은 공정 비용과 함께 수반되어야 하는 전사과정의 어려움으로 인하여 실제 상용화에 어려움이 있다. 이러한 단점의 극복을 위해 대량의 그래핀을 저렴하게 확보 할 수 있는 화학적 박리 방법이 주목을 받고 있다. 화학적 박리 방법의 경우 박리 과정에서 수반되는 산화 그래핀의 환원과정이 필요하였으며, 이를 위해 강력한 환원제를 이용한 화학적 환원 방법, 고온에서의 열처리를 이용한 열역학적 환원 방법, 및 빛을 노광시켜 산화 그래핀을 환원시키는 광학적 방법이 시도되었다. 화학적 및 열역학적 환원방법의 경우 고품질의 환원된 산화 그래핀을 획득 할 수 있으나, 강한 환원제 및 높은 열처리 온도로 인하여 유연 기판의 사용이 제한되는 단점이 있다. 이러한 단점을 극복하기 위해 빛을 이용한 광학적 방법이 제시되었으나, 환원과정에 사용되는 단파장의 자외선 광원의 높은 가격으로 인하여 경제성의 확보가 제한된다. 본 논문에서는 우수한 광학적 특성을 보이는 란타넘족 이온을 사용하여 선택적 파장 대에서 높은 광흡수도를 가지는 산화 그래핀-란타넘 이온 혼합용액을 만들었으며, 가시광선대역의 파장을 가지는 레이저를 사용하여 우수한 품질을 가지는 환원된 산화 그래핀을 제작하였다. 구체적으로 산화 그래핀은 modified hummer's method를 이용하여 만들어졌으며, 자외선 대역을 흡수하는 $Gd_{3+}$, 녹색 레이저를 흡수하는 $Tb_{3+}$, 적색 레이저를 흡수하는 $Eu^{3+}$를 1 mM 섞어주었다. 그 후, 300~800 nm의 파장을 가지는 레이저를 $1mW/cm^2$를 노광시켜 산화 그래핀을 환원시켰다. 환원된 산화 그래핀의 특성은 FT-IR, UV-Vis, 저온 PL, SEM, XPS 및 전기측정을 이용해 측정하여 재현성 및 반복성을 확인하였다.

• Composites Research
• /
• v.14 no.5
• /
• pp.12-19
• /
• 2001

In aircraft composite structures, structural defects such as matrix cracks, delaminations and fiber breakages are hard to detect if they are breaking out in operating condition. Therefore, to assure the structural integrity, it is desirable to perform the real-time health monitoring of the structures. In this study, a fiber optic sensor was applied to the composite beams to monitor failure and strain in real-time. To detect the failure signal and strain simultaneously, laser diode and ASE broadband source were applied in a single EFPI sensor using wavelength division multiplexer. Short time courier transform and wavelet transform were used to characterize the failure signal and to determine the moment of failure. And the strain measured by AEFPI was compared with the that of strain gage. From the result of the tensile test, strain measured by the AEFPI agreed with the value of electric strain gage and the failure detection system could detect the moment of failure with high sensitivity to recognize the onset of micro-crack failure signal.