• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.415-418
• /
• 2019

최근 사용자 대화형(user-interactive) 응용들은 OS에게 많은 양의 메모리를 빈번하게 요구한다는 특징을 보인다. 응용의 메모리 할당 요청이 발생하면 OS는 할당할 페이지의 초기화 작업을 필수적으로 수행하는데, 빈번하게 발생하는 페이지 초기화 작업이 응용의 성능을 저하시키고 있다. 기존 리눅스 기반 시스템은 페이지 초기화 지연을 단축하기 위해 CPU의 캐시에 매핑되어 있어서 초기 값을 빠르게 쓸 수 있는 페이지인 캐시-핫(cache-hot) 페이지를 우선적으로 할당한다. 하지만 기존 리눅스는 각 코어별로 캐시-핫 페이지를 인식하고 관리하며, 다른 코어가 관리하는 캐시-핫 페이지에는 접근할 수 없다. 이러한 정책 때문에 다른 코어가 공유 캐시(shared cache)에 매핑된 캐시-핫 페이지를 관리하고 있더라도, 이를 할당받지 못하고 캐시-콜드(cache-cold) 페이지를 할당받는 경우가 발생한다. 본 논문에서는 공유 캐시에 매핑된 것으로 추정되는 캐시-핫 페이지를 별도로 인식하고 공유 캐시에 매핑된 것으로 추정되는 캐시-핫 페이지를 모든 코어가 활용할 수 있게 하여, 응용이 캐시-핫 페이지를 할당받을 확률을 기존 기법보다 높이는 향상된 캐시-핫 페이지 할당 기법을 제안한다. 제안된 기법은 페이지 할당 요청이 발생하면 먼저 각 코어의 사유 캐시에 매핑된 것으로 추정되는 캐시-핫 페이지를 우선적으로 할당하고, 할당에 실패하면 공유 캐시에 매핑된 것으로 추정되는 캐시-핫 페이지를 할당한다. 이를 통해 캐시-핫 페이지를 할당받을 확률을 기존 기법보다 높이고, 결과적으로 평균 페이지 초기화 지연을 단축한다. 제안된 기법을 리눅스 커널 4.18.10버전 기반 환경에서 구현하여 실험한 결과, 평균 페이지 초기화 지연이 기존 리눅스 시스템과 비교하여 약 7% 단축되었다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.6
• /
• pp.594-598
• /
• 2008

In this paper we propose a fast booting technique based on Improved snapshot boot in embedded Linux, widely adopted in personal devices such as PDA and mobile phones. The existing Snapshot boot technique tries to create a snapshot image at the time of suspend, and later load the entire snapshot image into the system memory at the predefined location with the help of a bootloader at the time of resume. Since a bootloader has to copy the entire snapshot image into the predefined memory to resume the previous suspended computing state, a little bit long time is required to resume. Improved snapshot boot does not create a snapshot image consisting of whole memory pages at the time of suspend, thus resulting in smaller snapshot image than the existing snapshot boot. The remaining pages are in the swap area. The resulting smaller sized snapshot image enables much faster booting latency. Through the experiment, we can see the booting latency is reduced almost 30% with suspend image of 2982 pages. This result depends on the amount of swap-out pages.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.5
• /
• pp.11-23
• /
• 2022

For the design of the shortened ED(Expansion Deflection) nozzle, a numerical study of ED nozzle was performed according to the length reduction methods. The first method is to reduce the extension length of the ED nozzle with 80% bell nozzle length by 10%, 20% and 30%. The second method is to shorten the extension length by increasing the nozzle throat angle. Due to the increase in the curvature of the contour as the length shortened, the decrease in the nozzle exit velocity between the ED nozzle with 80% bell nozzle length and the ED nozzle in the first method was reduced, and the thrust become similar. The ED nozzle of the second method increased the thrust by increasing the nozzle exit velocity compared to the ED nozzle with 80% bell nozzle length.

• Sim-seong Yeon-gu
• /
• v.33 no.1
• /
• pp.61-80
• /
• 2018

We investigated whether the 81 items of the Gray-Wheelwright test correctly measure the concept of Jung's typology and aimed to refine the test. Participants (n=431) completed the Gray-Wheelwright test, and the results were analyzed using factor analysis with the varimax rotation and the maximum likelihood extraction method. A pair of opposing attitudes, introversion/extroversion, or one of the two pairs of opposing functional types, thinking/feeling or intuition/sensation, was labeled to the extracted factor according to the majority type of the items in the factor. The minority items or items not included in any factors were excluded from making a short form of the Gray-Wheelwright test with 45 items. We used intraclass correlation (ICC) coefficient and Cronbach's alpha for the test-retest reliability and internal consistency of the test, respectively. The newly developed short form of the Gray-Wheelwright test measured the Jung's personality types well, which was comparable to the original one while reducing time and effort required for the testing.

• Nuclear industry
• /
• v.15 no.2 s.144
• /
• pp.15-21
• /
• 1995

값싸고 질좋은 전력의 안정적 공급노력은 지속적으로 추진되었으며, 계획예방정비기간의 조정, 정비기간의 단축 등 공급능력 증대와 고장정지 예방을 위한 다각적인 노력과 중국 광동원전 기술인력 지원 등 1994년은 원전기술 수출의 원년의 해로 원전기술을 세계적 수준으로 올리는데 성공적인 한해였다고 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.193-201
• /
• 2011

The provision of traffic information plays an important role in increasing social benefit not only by saving travel time for individuals but also by improving the efficiency of road operation. VMS(Variable Message Sign) helps on-wheel drivers easily understand the road situation, and also provides real-time traffic information to people on the streets. However, it has not been sufficiently studied on how traffic information based on VMS influences on the drivers' selection of route. This study investigated how drivers use VMS traffic information and how they are satisfied with it. Then, the model of drivers' route selection was specified with the types of traffic information and the expected travel time to examine the influence on the selection of drivers' route. The model was estimated and analyzed in three types according to the condition of detour roads, and the rate of route change and the degree of sensitivity was calculated from the estimation. The results of analysis are as follows. the $1^{st}$ type model showed the 10% of route change for the travel time saving of 5minutes, and the 81.6% of route change for the travel time saving of 20minutes. The $2^{nd}$ type led to the range of route change from 14.2% to 92.7% over the 5 through 20 minutes of travel time saving. The $3^{rd}$ model resulted in the 99.1% of route change. The sensitivity of route change showed the highest for the travel time saving of 11 minutes with the $1^{st}$ type model, 9 minutes with the $2^{nd}$ type model, and 5 minutes with the $3^{rd}$ type model respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.13-19
• /
• 2012

The use of RFID is recently increasing for the realization of Ubiquitous computing. Reducing the process time of tag recognition is crucial as RFID system has to recognize multiple objects in a short amount of time. In this manuscript, therefore, an effective scheme using multi-reader is suggested to improve processing speed for tag authentication in RFID system. According to the result of performance analysis, the processing time required for tag authentication was drastically reduced in multi-reader environment than it was in a single reader. Consequently, the use of the suggested scheme cuts down on the processing time while identifying tags by using multi-reader and bring about overall performnce improvement of RFID system.

• The Korean Journal of Rheology
• /
• v.8 no.1
• /
• pp.11-29
• /
• 1996

스크류 채널 내에 주기적을 배리어를 설치함으로써 단축 스크류 압출 공정에서의 혼합 성능이 높여질수 있음이 S.J. Kim과 T.H. Kwom에 의해 밝혀진 바있다. 그들은 이새 로운 스크류를 통한 혼합이 카오틱하는 점으로부터 이 새로운 스크류를 카오스 스크류라고 명명했다. 우리는 카오스 스크류가 장착된 단축 압출공정에서 역학계 이론과 혼합운동학을 연계하여 연구를 수행하였다. 포인카레 단면을 통한 연구로부터 우리는 배리어의 배열이 islan의 크기에 대단히 밀접하게 관련되어 있음을 발견하였다. 연속적인 쉘 변형은 카오틱 유동에서 유체 요소를 지수 함수 형태로 늘이는 늘임과 접힘으로 이루어진 카오틱 혼합 메 카니즘을보여준다. 유체요소의 국부 늘임은 원리상으로는 계산되어질수 있으나 수치 해석상 의 어려운 점이 있다. 정규 유동에서와 달리 카오틱 유동에서는 입자 추적이 Runge-Kutta 적분중의 시간간격에 대단히 민감하다. 그래서 실제 사용될수 있는 시간 간격에 의해 계산 된 국부 늘임율 및 혼합효율의 정확도가 보장되어지지 않는다. 이러한 점들을 고려하여 우 리는 새로운 혼합 척도로 $\sigma$z를 제안하는데 이값은 비교적 긴 유체선분이 채널방향을 따라 늘어나는 비에 관련된 값이다. 배리어 영역의 길이가 짧을수록 $\sigma$z는 큰값으로 나타나지만 포인카레 단면에 의한 연구에 따르면 배리어의 주기가 너무 짧다면 두 개의 거대한 island 가 존재하는 것으로 밝혀졌다. 그리고 이러한 사실은 유체요소의 늘임비가 크다는 것이 항 상 좋은 혼합성능을 뜻하는 것은 아니라는 점을 보여준다. 이러한 관점에서 볼 때 혼합 스 크류를 설계하는데 있어서는 포인카레 단면을 병행하여 ${\sigma}_z$의 값을 사용하는 것이 바람직할 것이다.

• Journal of the Korean Society of Radiology
• /
• v.82 no.5
• /
• pp.1218-1230
• /
• 2021

Purpose To compare the per-patient diagnostic performance of simulated abbreviated MRI (AMRI) to that of conventional MRI (CMRI) with full-sequence dynamic gadoxetic acid (GA) enhancement for early-stage hepatocellular carcinoma (HCC) screening in high-risk patients. Materials and Methods A total of 201 consecutive patients at high-risk for HCC, who underwent 3T liver MRI, were included in this retrospective study. The AMRI protocol comprised T2-weighted imaging, hepatobiliary phase imaging after GA injection, and diffusion-weighted imaging. For each patient, two AMRI and CMRI image sets were independently reviewed by two radiologists. Inter-reader agreement was assessed using Cohen's kappa value. A composite reference standard was used to determine the diagnostic performance of each image set for each reader. Results A total of 93 HCCs were detected in 79 patients. The inter-reader agreement was almost perfect for both image sets (κ = 0.839, 0.948). In AMRI, the per-patient sensitivity and negative predictive values (NPV) were 94.9% and 96.4%, respectively. In CMRI, the per-patient sensitivity and NPV were 96.2% and 97.5%, respectively. Conclusion AMRI, using only three sequences, had a comparable diagnostic performance to CMRI in screening early-stage HCC. AMRI could be an alternative HCC screening tool for high-risk HCC patients.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.13-24
• /
• 2012

In this study, the in-situ model test has been conducted and used to estimate and analyze consolidation behavior of the ground by using the miniature test that reconstructs economically geotechnical behavior of in-situ full scale structure. To analogize the relation among effective stress, void ratio and coefficient of permeability at the self-weight consolidation stage, the low stress seepage consolidation test has been conducted and the involution function of constitutive equation had been obtained from the result of the curve fitted seepage consolidation test result. As a result of the numerical analysis that had been conducted on the representative section using a constitute equation, final settlement was similar with those of self-weight consolidation of the centrifugal model test. But, it was more or less smaller. It seems that these trends are caused by the difference between estimated values.