• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.143-151
• /
• 2022

This study was carried out to investigate quantitative characteristics of the cooling effect in a single-span arch greenhouse with roll-up side vents depending on operation of circulation and exhaust fans during ventilation, in order to suggest a practical strategy regarding installation or operation of forced ventilation systems. The examination was conducted under 3 different ventilation conditions (side vents only, side vents + circulation fans, and side vents + circulation fans + exhaust fans). In each condition, variations of internal and external air temperatures and exogenous environmental factors were recorded during ventilation, and the cooling effects were investigated by comparing the normalized temperature difference (NTD) of each ventilation condition. In the morning time (11:00-12:00), a temporary peak in the temperature difference was observed at the beginning of ventilation regardless of ventilation methods. The time taken to the maximum NTD was decreased from 340 s to 110s, and the NTD was dropped from 1.158 to 1.037 as the more forced ventilation systems were operated. The more operations caused the passing time over specific NTD values reduced by 60% as the time was reduced from 1,030 s to 550 s at NTD = 0.8, 1,610 s to 915 s at NTD = 0.6, and 2,315 s to 1,360 s at NTD = 0.4. The temporary peak in NTD was not observed in the afternoon time (14:00-15:00) but it was dropped as quickly as the ventilation started. Also the more operations resulted in the passing time over specific NTD values reduced by 70% as the time was reduced from 560 s to 345 s at NTD = 0.8, from 825 s to 540 s at NTD = 0.6, and from 1,145 s to 810 s at NTD = 0.4. Conclusively, the intervention of the forced ventilation system is recommended in the morning time or in high thermal conditions to achieve more effective and economical ventilation.

• Korean Journal of Culture and Social Issue
• /
• v.28 no.2
• /
• pp.187-217
• /
• 2022

The aim of this study is to examine the psychometric properties of the Korean version of the Post-traumatic Stress Disorder Checklist for DSM-5(PCL-5). For this purpose, online surveys were conducted for two times with a one year interval using the data from 1,077 Korean adults at time 1, and 563 Korean adults at time 2. First, from the result of the confirmatory factor analysis, comparing the model fit of the 1, 4, 6, and 7-factor model, the 4, 6, and 7-factor model showed a acceptable fit, and the best fit was seen in the order of the 7, 6, 4-factor model. Second, the internal consistency, omega coefficient, construct validity, average variance extracted, and test-retest reliability results were all satisfactory.. Third, a correlation analysis with the K-PC-PTSD-5 and the sub-factors of BSI-18 was conducted to check the validity of the Korean Version of PCL-5. As a result, a positive correlation was seen with both K-PC-PTSD-5 and BSI-18. Fourth, a hierarchical multiple regression was performed to examine whether the Korean Version of PCL-5 predicts future PTSD, depression, anxiety, and somatization. As a result, the Korean Version of PCL-5 measured at time 1 significantly predicted PTSD, depression, anxiety, and somatization symptoms at time 2. Fifth, by analyzing the ROC curve, the discriminant power of PCL-5 for screening PTSD symptom groups was confirmed, and the best cut-off score was suggested. As a result of the longitudinal validation of Korean version of PCL-5, it was found that this scale is a reliable and valid measure for Korean adults. By looking into the predictive validity of the scale, it was found that the Korean version of PCL-5 can predict not only PTSD symptoms but also PTSD-related symptoms such as depression, anxiety, and somatization. Also, this study differs from previous validation studies measuring PTSD symptoms in that it suggested a cut-off score to help differentiate PTSD symptom groups.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.4
• /
• pp.428-433
• /
• 1989

The objective of this experiment was to determine if there were feasible to transplant infant rice seedling for machine transplanting. Cultivars tested were Sobaegbyeo and Daecheongbyeo, ]aponica type cultivars. Infant seedling, young seedling and semi-adult seedling were raised with sailor rock wool in seedling tray from 1986 to 1988. Infant rice seedling raised more than 4 days after sowing with rock wool was uniform, and low in ratio of missing hill at machine transplanting. Tiller number per m$^2$ was more in infant rice seedling, young seedling and semi-adult seedling, in that order. Heading dates were not significantly different among seedlings applied, however rice plant sown directly was later 4 or 5 days than any other seedlings. Panicle number per m$^2$ was more in infant seedling than in semi-adult seedling, but ripened ratio was lower in infant seedling due to lodging. Thus there were not greatly different in yield among seedlings tested. Therefore infant rice seedling (more than 5cm in plumule length) raised for 7 days was most optimum, and rock wool would be used as a nursery soil instead of nursery soil for raising infant rice seedling in machine transplanting.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.13 no.1
• /
• pp.103-114
• /
• 2011

The present survey was conducted to investigate effects of weaning age on market weights of steers and calf mortality in Hanwoo. Eight hundred and sixty-two Hanwoo cow-calf operations from all nine provinces were surveyed via personal interviews. The number of farms categorized by herd (heifer plus cow) size were 188, 364, 227 and 83 for <20 heads, 20~49 heads, 50~99 heads and >100 heads, respectively. Approximate 40% of farms surveyed weaned calves at three months of age. The percentages of farms weaning calves over three months of age were 53.5%, 37.5%, 43.7% and 39.0% for <20 heads, 20~49 heads, 50~99 heads and >100 heads, respectively. The herd size did not affect market weights of Hanwoo steers. However weaning age was negatively correlated to carcass weight of Hanwoo steers, showing that as weaning age decreased, carcass weights of Hanwoo steers increased. The average calf mortality was 5.6% and the herd size did not affect calf mortality. But weaning age was shown to be positively correlated to calf mortality and the rate of diarrhea that caused calf death, suggesting that as weaning age decreased, calf mortality and the rate of diarrhea decreased. Overall, the results of present study suggest that a decrease of calf weaning age in Hanwoo can increase the profit of Hanwoo cow-calf operations by increasing carcass weight of Hanwoo steers and by decreasing calf mortality.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.363-371
• /
• 2023

To construct a ship, blocks of various sizes must be moved and erected . In this process, lugs are used such that they match the block fastening method and various functions suitable for the characteristics of each shipyard facility. The sizes and shapes of the lugs vary depending on the weight and shape of the block structures. The structure is reinforced by welding the doubling pads to compensate for insufficient rigidity around the holes where the shackle is fastened. As for the method of designing lugs according to lifting loading conditions, a simple calculation based on the beam theory and structural analysis using numerical modeling are performed. In the case of the analytical method, a standardized evaluation method must be established because results may differ depending on the type of element and modeling method. The application of this ambiguous methodology may cause serious safety problems during the process of moving and turning-over blocks. In this study , the effects of various parameters are compared and analyzed through numerical structural analysis to determine the modeling conditions and evaluation method that can evaluate the actual structural response of the lug. The modeling technique that represents the plate part and weld bead around the lug hole provides the most realistic behavior results. The modeling results with the same conditions as those of the actual lug where only the weld bead is connected to the main body of the lug, showed a lower ulimated strength compared with the results obtained by applying the MPC load. The two-dimensional shell element is applied to reduce the modeling and analysis time, and a safety working load was verified to be predicted by reducing the thickness of the doubling pad by 85%. The results of the effects of various parameters reviewed in the study are expected to be used as good reference data for the lug design and safe working load prediction.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.123-129
• /
• 2013

Purpose: The way check the movement of the fiducial marker insertion in the treatment of patients with prostate cancer. However the existing methods of fiducial marker verification process difficult to identify the specific location of the marker behind the femur and pelvic bone. So to study the evaluation of maker match with using kilo voltage (KV) X-ray by On-board imager to both oblique verification method. Materials and Methods: Five patients were selected for rectal ballooning and inserted fiducial marker. Compare the position of the fiducial marker of reference plan 2D/2D Anterior/Posterior verification method and 2D/2D both oblique verification method. So to measurement the shift score of X, Y, Z (axis) and measure exposure dose given to patients and compare matching time. Results: 2 dimensional OBI KV X-ray imaging using two-dimensional matching image are orthogonal, so locating fiducial marker matching clear and useful DRR (digital reconstruction radiography) OBI souce angle ($45^{\circ}/315^{\circ}$) matching most useful. 2D/2D both oblique verification method was able to see clearly marker behind the pelvic bone. Also matching time can be reduced accordingly. According to the method of each matching results for each patient in each treatment fraction, X, Y, and Z axis the Mean $value{\pm}SD$ (standard deviation) is X axis (AP/LAT: $0.4{\pm}1.67$, OBLIQUE: $0.4{\pm}1.82$) mm, Y axis (AP/LAT: $0.7{\pm}1.73$, OBLIQUE: $0.2{\pm}1.77$) mm, Z axis (AP/LAT: $0.8{\pm}1.94$, OBLIQUE:$1.5{\pm}2.8$) mm. In addition, the KV X-ray source dose radiation exposure given to the patient taking average when AP/LAT matching is (0.1/2.1) cGY, when $315^{\circ}/45^{\circ}$ matching is (0.27/0.26) cGY. Conclusion: In conclusion for inserted fiducial marker of prostate cancer patients 2D/2D both oblique matching method is more accurate verification than 2D/2D AP/LAT matching method. Also the matching time less than the 2D/2D AP/LAT matching method. Taken as the amount of radiation exposure to patients less than was possible. Suggest would improve the treatment quality of care patients more useful to establish a protocol such as case.

• Quality Improvement in Health Care
• /
• v.7 no.2
• /
• pp.138-155
• /
• 2000

Background: Factors related to waiting and staying time for patient care in emergency care center (ECC) were examined during 1 month from Apr. 1 to Apr. 30, 1997 at an ECC of Yeungnam university hospital in Taegu metropolitan city, to obtain the baseline data on the strategy of effective management of emergency patients. Method: The study subjects consisted of the 1,742 patients who visited at ECC and the data were obtained from the medical records of ECC and direct surveys. Results: The mean interval between ECC admission time and initial care time by each ECC duty residents was 83.1 minutes for male patients and 84.9 minutes for female patients, and mean ECC staying time (time interval between admission and final disposition from ECC) was 718.0 minutes in men and 670.5 minutes in women. As the results, the mean staying time in ECC was higher in older age, and especially the both of initial care time and staying time were highest in patients of medical aid, and shortest in patients of worker's accident compensation insurance. The on admission or not, previously endotracheal-intubation state of patient. The ECC staying ti initial care time was much more delayed in patients of not having previous medical records and the ECC staying time was higher in referred patients from out-patient department, in transferred patients from the other hospitals and patients having previous records, and in patients partly used the order-communicating system. The factors associated with the initial care time were the numbers of ECC patients and the existence of any true emergent patients, being cardiopulmonary resuscitation (CPR) statusme was much more longer in patients of drug intoxication, in CPR patients, in medical department patients, in transfused patients and in patients related to 3 or more departments. And according to the numbers of duty internships, the ECC staying time for four internships was more longer than for five internships and after admission ordering was done, also-more longer in status being of no available beds. As above mentioned results, the factors for the ECC staying time were thought to be statistically significant (P<0.01) according to the patient's age and the laboratory orders and the X-ray films checked. And also the factor for the ECC staying time were thought to be statistically significant (P<0.01) according to the status being of no available beds, the laboratory orders and/or the special laboratory orders, the X-ray films checked, final disposing department, transferred to other hospital or not, home medication or not, admission or not, the grades of beds, the year grades of residents, the causes of ECC visit, the being CPR status on admission or not, the surgical operation or not, being known personells in our hospital. Conclution: Authors concluded that the relieving method of long-staying time in ECC was being establishing the legally proved apparatus which could differentiate the true emergency or non-emergency patients, and that the methods of shortening ECC staying time were doing definitely necessary laboratory orders and managing beds more flexibly to admit for ECC patients and finally this methods were thought to be a method of unloading for ECC personnels and improving the quality of care in emergency patients.

• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.328-335
• /
• 2005

The objective of this study was to evaluate tire effects of modified triple pelvic osteotomy(TPO). The procedures of modified TPO were composed of two iliac osteotomies and a pubic symphysiotomy at a tittle. Medical records of modified TPO treatment on 36 dogs and of unilateral TPO on 7 dogs were reviewed on the basis of signalment, body weight, operation time, Healing time of osteotomy sites and complications from October 2002 to September 2004. The values of clinical status and hip dysplasia, Norberg angle, percentage of femoral head coverage and pelvic diameter from radiographs taken preoperative, immediately postoperative, 2, 4, 8, 12 and 24 weeks after operation, respectively, were measured. In .unilateral TPO, the dogs could start standing without assistance from $3.0\pm1.0days$ and walking from $8.3\pm0.6days$ (n=3). Mean clinical grade before and 24 weeks after surgery were $2.2\pm0.42$(n=6) and $3.5\pm0.7$ (n=2), respectively. Mean operation time was $107.3\pm38.9$ minutes (n=4). In modified TPO, the dogs were seen to staff standing without assistance from $4.9\pm3.7$ days and walking from $7.3\pm4.8days$ (n=25). Mean clinical grade before surgery and 24 weeks after surgery were $2.3\pm1.5$ (n=27) and $3.2\pm0.7$)(n=9), respectively. Postoperative clinical grade significantly improved against preoperative clinical grade (P<0.01). Mean operation time was $143\pm42.8$ minutes (n=24). This was shorter than time f3r twice unilateral TPO. By comparison with preoperative values, postoperative mean radiographic grade, percentage of femoral head coverage and Norberg angle measured at the recheck time point significantly increased (P<0.01). Mean postoperative pelvic diameter was significantly larger than preoperative pelvic diameter in modified TPO (P<0.01) but not in unilateral TPO. These results indicated that modified TPO was effective technique for the treatment of hip dysplasia in dogs.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.2 no.1
• /
• pp.65-73
• /
• 1999

Purpose: Regurgitation, vomiting and feeding intolerance are frequent in the neonates. Esophageal function and gastric peristalsis are not fully developed in the neonates, so we should give attention to reduce the incidence of regurgitation and vomiting after feeding. It is necessary to shorten the gastric emptying by change of feeding types and postprandial postures. Gastric emptying time was measured by ultrasound in the neonates to evaluate the effect of feeding types and postprandial postures. Method: We measured gastric antral cross sectional area along the abdominal aorta at the level of the superior mesenteric artery in longitudinal section at NPO state (4 hours after feeding), 0 and every 30 min. after feeding until the value goes below or back to the NPO state. Fifteen neonates were examined in each breast-fed and formula-fed group in supine position. Eighteen and 15 neonates were examined in supine and prone posture after formula feeding, respectively. We used 5 MHz convex prove with Aloka Echo Camera SSD-650. Result: 1) Gastric emptying time of breast-fed infants was $76.0{\pm}20.02$ min. which was significantly shorter than $96.0{\pm}20.28$ min. of formula-fed infants. 2) Gastric emptying time on postprandial prone posture was $85.0{\pm}22.43$ min. which was not significantly different from $96.0{\pm}20.28$ min. on postprandial supine posture. Conclusion: Breast feeding is strongly recommended to the neonates to shorten gastric emptying time. So we can expect to reduce the incidence of regurgitation, vomiting and feeding intolerance. The postprandial posture depends on the traditional trend which is safe and comfortable to the mothers.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.557-564
• /
• 2015

The previous etching, rinsing and drying processes of wafers for MEMS (microelectromechanical system) using SC-$CO_2$ (supercritical-$CO_2$) consists of two steps. Firstly, MEMS-wafers are etched by organic solvent in a separate etching equipment from the high pressure dryer and then moved to the high pressure dryer to rinse and dry them using SC-$CO_2$. We found that the previous two step process could be applied to etch and dry wafers for MEMS but could not confirm the reproducibility through several experiments. We thought the cause of that was the stiction of structures occurring due to vaporization of the etching solvent during moving MEMS wafer to high pressure dryer after etching it outside. In order to improve the structure stiction problem, we designed a continuous process for etching, rinsing and drying MEMS-wafers using SC-$CO_2$ without moving them. And we also wanted to know relations of states of carbon dioxide (gas, liquid, supercritical fluid) to the structure stiction problem. In the case of using gas carbon dioxide (3 MPa, $25^{\circ}C$) as an etching solvent, we could obtain well-treated MEMS-wafers without stiction and confirm the reproducibility of experimental results. The quantity of rinsing solvent used could be also reduced compared with the previous technology. In the case of using liquid carbon dioxide (3 MPa, $5^{\circ}C$, we could not obtain well-treated MEMS-wafers without stiction due to the phase separation of between liquid carbon dioxide and etching co-solvent(acetone). In the case of using SC-$CO_2$ (7.5 Mpa, $40^{\circ}C$), we had as good results as those of the case using gas-$CO_2$. Besides the processing time was shortened compared with that of the case of using gas-$CO_2$.