• Journal of Broadcast Engineering
• /
• v.27 no.2
• /
• pp.216-227
• /
• 2022

The MPEG-I (Immersive) group is working on a standardization project for immersive video that provides 6 degrees of freedom (6DoF). The MPEG Immersion Video (MIV) standard technology is intended to provide limited 6DoF based on depth map-based image rendering (DIBR) technique. Many efficient coding methods have been suggested for MIV, but efficient transmission strategies have received little attention in MPEG-I. This paper proposes group-based adaptive rendering method for immersive video streaming. Each group can be transmitted independently using group-based encoding, enabling adaptive transmission depending on the user's viewport. In the rendering process, the proposed method derives weights of group for view synthesis and allocate high quality bitstream according to a given viewport. The proposed method is implemented through the Test Model for Immersive Video (TMIV) test model. The proposed method demonstrates 17.0% Bjontegaard-delta rate (BD-rate) savings on the peak signalto-noise ratio (PSNR) and 14.6% on the Immersive Video PSNR(IV-PSNR) in terms of various end-to-end evaluation metrics in the experiment.

• Journal of the Korean School Mathematics Society
• /
• v.25 no.1
• /
• pp.61-77
• /
• 2022

This study looked at the deviation of each textbook, focusing on the detailed learning content related to the quadratic curve properties contained in high school geometry textbooks. Rather than criticizing the diversity of content elements covered in high school geometry textbooks and suggesting alternatives, it focused on analyzing the actual conditions of content element diversity. The curriculum specifies that the practical application of the quadratic curve should be emphasized so that student could recognize the usefulness and value. However, as a result of the analysis, it was confirmed that the purpose of the curriculum and the structure of the textbook did not match somewhat, the deviation of content elements for each textbook was quite large. In terms of acknowledging the diversity of teaching and learning, the diversity of each textbook on the methods of the introduction and the natures related to the quadratic curve can be fully recognized. But in our educational reality, which is aiming for the university entrance examination system through national evaluation such as CSAT, the results are too sensitive in society as a whole, so the diversity of expressions in mathematics textbooks is sometimes interpreted as a disadvantage of evaluation. It is time to reconsider the composition of textbooks that recognizes the diversity of content elements in textbook teaching and learning and at the same time reflects the aspect of equality in evaluation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1044-1053
• /
• 2022

Time domain reflectometry (TDR) is a diagnostic technique to evaluate the physical integrity of cable and finds application in leak detection and localization of piping system. In this study, a cable-shaped leak detection sensor was proposed using the TDR technique for monitoring leakage detection of ship's engine room seawater piping system. The cable sensor was developed using a twisted pair arrangement and wound by an absorbent material. The availability and performance of the sensor for leak detection and localization were evaluated on a lab-scale pipeline set up. The developed sensor was installed onto the pipes and flanges of the lab-scale set up and various TDR waveforms were acquired and analyzed according to the dif erent variables including the number of twists and sheath thickness. The result indicated that the twisted cable sensor was able to produce clear and smooth signal as compared to the TDR sensor with a parallel arrangement. The optimal number of twist was determined to be above 10 per the unit length. The optimal diameter of sheath thickness that results in the desired sensitivity was determined to be ranging from 80% up to 120% of the diameter of the conductor. The linear regression analysis for estimation of leak localization was carried out to estimate the location of the leakage, and the result was a determination coefficient of 0.9998, indicating a positive relationship with the actual leakage point. The proposed TDR based leak detection method appears to be an effective method for monitoring leakage of ship's seawater piping system.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.510-514
• /
• 2022

In this paper, we propose the development of high-sensitivity low-end radiation measuring sensor module. The proposed measurement sensor module is a scintillator + photomultiplier(SiPM) sensor optimization structure design, amplification and filter and control circuit design for sensor driver, control circuit design including short-distance communication, sensor mechanism design and manufacturing, and GUI development applied to prototypes consists of, etc. The scintillator + photomultiplier(SiPM) sensor optimization structure design is designed by checking the characteristics of the scintillator and the photomultiplier (SiPM) for the sensor structure design. Amplification, filter and control circuit design for sensor driver is designed to process fine scintillation signal generated by radiation with a scintillator using SiPM. Control circuit design including short-distance communication is designed to enable data transmission through MCU design to support short-range wireless communication function and wired communication support. The sensor mechanism design and manufacture is designed so that the glare generated by wrapping a reflective paper (mirroring) on the outside of the plastic scintillator is reflected to increase the efficiency in order to transmit the fine scintillation signal generated from the plastic scintillator to the photomultiplier(SiPM). The GUI development applied to the prototype expresses the date and time at the top according to each screen and allows the measurement unit and time, seconds, alarm level, communication status, battery capacity, etc. to be expressed. In order to evaluate the performance of the proposed system, the results of experiments conducted by an authorized testing institute showed that the radiation dose measurement range was 30 𝜇Sv/h ~ 10 mSv/h, so the results are the same as the highest level among products sold commercially at domestic and foreign. In addition, it was confirmed that the measurement uncertainty of ±7.4% was measured, and normal operation was performed under the international standard ±15%.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.45-58
• /
• 2023

KVMF(Korean Variable Message Format) 1.0 protocol is the Army's standard tactical datalink protocol that defines standard messages and communication methods to enable data communication between various weapon systems through bitwise variable message processing. The protocol has been applied to a variety of Army weapon systems over the past decade and has contributed to upgrade the Army's operational capabilities by enabling the implementation of Network Centric Warfare (NCW), the core of modern warfare. Since the KVMF 1.0 protocol was applied, new weapon systems with new technologies have been introduced over time, and new weapon systems have new messages based on the characteristics of the weapon system. As a result, compatibility problems arose due to different message versions with existing weapon systems, and it was expected that these problems would continue to emerge in the future, considering the need for continuous message revisions. Therefore, it became necessary to solve this problem, so this paper proposed a KVMF 2.0 protocol design that guarantees compatibility between forward and backward versions. In this paper, we implemented the design as SW, and confirmed that the design worked successfully by test between forward and backward versions on test environment. Therefore, when the KVMF 2.0 protocol design is applied to a weapon system, we can expect that the weapon system can be compatible with the forward and backward versions working with the existing weapon systems as well as with the future weapon systems.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.9-16
• /
• 2022

In this paper, we propose a plan to design and utilize the RDBS(Record Block Data file management System) so that data can be recovered when data files in the Combat Management System are mismatched. The CMS(Combat Management System) manages the same files in multiple IPN(Infomation Processing Node) repositories to support multiplexing. However, mismatches in data files can occur due to equipment maintenance or user immaturity. The existing CMS does not manage the history of changes in data files, and when a mismatch occurs, data file were synchronized based on the latest date. But, It is difficult to say that files with the latest date have the highest reliability, and once the file synchronization has progressed, it cannot be recovered with pre-synchronization data. To solve this problem, data was stored and synchronized in units of record blocks using RDBS proposed in this paper, and the Rsync algorithm was used to reduce the overhead of file synchronization due to units of record blocks. SW applied with RDBS was tested for performance in a simulated environment, and it was confirmed that it could be applied to CMS through normal operation confirmation.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.585-596
• /
• 2022

This study determined major factors influencing landslide occurrence along a forest road near Sangsan village, Sancheok-myeon, Chungju-si, Chungcheongbuk-do, South Korea. Within a 2 km radius of the study area, landslides occur intensively during periods of heavy rainfall (August 2020). This makes study of the area advantageous, as it allows examination of the influence of only geological and tomographic factors while excluding the effects of rainfall and vegetation. Data for 82 locations (37 experiencing landslides and 45 not) were obtained from geological surveys, laboratory tests, and geo-spatial analysis. After some data preprocessing (e.g., error filtering, minimum-maximum normalization, and multicollinearity), structural equation model (SEM) and logistic regression (LR) analyses were conducted. These showed the regolith thickness, porosity, and saturated unit weight to be the factors most influential of landslide risk in the study area. The sums of the influence magnitudes of these factors are 71% in SEM and 83% in LR.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.2
• /
• pp.154-159
• /
• 1991

A field experiment was conducted to know the feasibility of direct-seeded rice. Dry seeds of a Japonica type rice variety, Donghaebyeo, was sown from May 10 to June 20 at the 10-day intervals. The number of days from seeding to emergence decreased as planting date delayed; 13, 12, 10, 9, and 7 days at May 10, May 20. May 30. and June 10 seedings, respectively. The number of maximum tillers per ㎡ was about 700-800 at all the seeding dates and effective tiller ratio ranged 40-45%. The number of days from seeding to heading decreased as seeding date delayed; from 97 days at May 10 planting to 71 days at June 20 planting. The cumulative effective temperature (mean air temperature-15$^{\circ}C$) from seeding to heading was fairly constant having 870$^{\circ}C$ with 2.3% C.V. The number of panicles per unit area at June 10 planting was higher than that of other planting dates. Panicle length and the number of spikelets per panicle tended to decrease as seeding date delayed. The number of spikelets per unit area, 1000-grain weight, and grain yield were similar among the seeding dates except June 20 seeding. At the June 20 seeding the number of spikelets and grain yield were much lower, but 1000-grain weight was higher compared with other seeding dates. Grain fertility and percent ripened grains was similar among all seeding dates.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.4
• /
• pp.320-327
• /
• 1990

Experiments were conducted to investigate the method to raise seedling establishment rate and the optimum seeding dates and rates in direct seeding culture using transplanter under submerged field condition in Chuncheon area during 1986 to 1988. Direct seeding on submerged field using transplanting machine after sowing on seedling growing box contained with paddy or upland soil was possible. Higher rate of seedling establishment was obtained in case of sowing sprouted seed and intermittent irrigation after sowing. Seedling establishment rate was higher both in April 30 or May 10 seeding plot. Minimum daily average air and soil temperature to ensure more than 70 percent seedling establishment was 14.8$^{\circ}C$ and 16.3$^{\circ}C$ respectively. Optimum sowing date in the direct sowing was early May and optimum sowing rate was 200g per box, 6kg per l0a. In this case rice grain yield was 481kg per l0a and this is almost same yield level compared hand and machine transplanting.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.20-27
• /
• 1982

Two rice varieties were planted and four degrees of defoliated tiller num ber ratio and another four levels of defoliation-panicle removal tiller number ratio were made at heading stage of know the possibility of translocation of photosynthetic products between tillers during grain filling stage of rice plant. The more tillers defoliated in a hill, the less matured grain ratio and the less grain weight per panicle of normal tillers were found. But the matured grain ratio and the grain weight per panicle of tillers defoliated partly in a hill showed higher than those of tillers of completely defoliated plant. No differences of the matured grain ratio and the grain weight per panicle were found between different levels of defoliation-panicle removal tiller number ratio in a hill. But the matured grain ratio and the grain weight per panicle of tillers of completely defoliated plant were significantly lower than those of tillers of partly defoliation-panicle removal treatments. These results indicated that the translocation of photosynthetic products between tillers was possible during grain filling period in rice plant. Source-sink relationship can be applied to interpret the result obtained in this study.