• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.42-47
• /
• 1992

본 연구에서는 공극관의 실험인자에 대한 특성을 알아보기 위하여 공극관에 입사되는 음파의 파수 k와 공극분포부분들 사이의 거리인 a의 곱으로 나타나는 무차원변수 ka와, 공극관의 단면적에 대한 전체 공극면적의 비로 정의한 공극률을 실험인자로 하여 연구를 진행하였다. 또한 sulivan의 모델을 이용하여 공극관을 모델링하고 이를 컴퓨터를 사용하여 모의 실험을 한 후 실험결과와 비교하였다.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.230-235
• /
• 1997

Coupling loss variation as the shape of fiber ends and the fiber arrangement in a fiber Fabry-Perot cavity, formed with two optical fibers with dielectric mirror coatings on their ends, is analyzed. For the intended features it is assumed that one of two fibers is processed to have a concave mirror whose curvature is the same as that of the wavefront of the Gaussian beam from the first fiber. In this assumption, it was turned out that the coupling loss at the cavity length of 15 ${\mu}{\textrm}{m}$ is less than 0.5% even with tilt angle of 0.2$^{\circ}$, curvature error of 70 ${\mu}{\textrm}{m}$, cavity length error of 8 ${\mu}{\textrm}{m}$, and lateral alignment error of 0.5 ${\mu}{\textrm}{m}$. Thus, low loss and high-finesse fiber Fabry-Perot filters whose cavity length is greater than several ${\mu}{\textrm}{m}$ can be obtained easily if the receiving fiber end is properly formed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.238-238
• /
• 2019

산지계곡에는 큰 자갈이나 호박돌이 무더기로 퇴적되어 있어서 대규모 공극을 구성한다. 호우시 이 돌무더기 내부에 빠른 흐름이 형성되고 이에 따른 퇴적사면의 급격한 변동이 발생하기도 한다. 본 연구에서는 대공극 매질의 흐름은 산지계곡에 퇴적된 균일 직경을 가진 구형 입자로 구성된 대규모 공극 매질을 구성하고, 비 Darcy 흐름의 유속에 미치는 입경의 영향을 수리실험으로 조사하였다. 실험에 사용된 구형 입자는 크기가 15.5mm, 25mm, 36.5mm인 유리구슬이고, 조성된 매질의 공극율은 Table 1과 같으며, 실험에서 침투거리는 40cm로 하였다. 실험유량은 0.98~15.41 t/s이고 입자 Reynolds 수는 120~4,580의 범위였다. 동수경사가 증가하면 매질의 단면평균 유속이 비선형적으로 증가하였다. 입경이 작을수록 유속과 동수경사 사이의 비선형적 경향이 더 크다(Fig.1). 동일한 동수경사에서 매질의 입경이 클수록 유속이 빠르게 나타났다.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.447-461
• /
• 2015

The purpose of this study is to develop a torso pattern that is highly representative for the proper body shape of women in their thirties. Size data of the women with age of 30 through 39 from the database of Size Korea 2004 were used for the study. In order to develop a master pattern which will be used as the benchmark for grading of research group, 4 existing torso block drafting methods were compared based on the data gathered and the block with the highest evaluation score was utilized as a reference point. For the analysis, data was divided into four types, only the data of 138 subjects which were evaluated at least by four or more experts as valid were used for the study. The major results can be summarized as follow. The women of bust girth of 91cm and height of 160cm which was turned out to be representative type of research group were used as standard measurement for the purpose of reflecting not only curve length of the 3D analysis measurement but also the difference between front and back thickness to the pattern. Dart locations were set based on front and back torso ease, shoulder area revisions, front sagging length 1.5cm and cross section crevice length analysis. According to the experts' appearance evaluation of the pattern was found to be better than the control pattern which was regarded as the best among 4 patterns created based on existing torso block drafting methods.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.390-401
• /
• 2002

This study was to evaluate the fitness and the suitability of size specification of the ready made jacket for women by analysing pattern size and space between skin and clothing using 3D scanner. The results were as follows: 1. Pattern B had the lowest score and the feeling of wearing was significantly different among the given patterns even though all jacket size specification were the same. 2. Ease amount was different between each brand even though the jacket size specification was the same due to the different pattern grading rules. And increasing grading amounts were bigger in horizontal direction rather than in vertical direction. 3. We could obtain accurate a 3 dimensional figure, using 3D scanner which was very useful and more accurate than 2 dimensional data using photography method. 4. Analyzing the average space between skin and clothing of each pattern, there was no significant difference in the average space between skin and clothing among all patterns except waist part of B88 size. And analyzing the average space between skin and clothing of each measured body parts by each size, there existed a significant difference in the interscye, abdomen and hip parts.